Qi2 X27Q Magnetic Wireless Car Charger User Manual

Qi2 X27Q Magnetic Wireless Car Charger

Product Information

Specifications

• Model: PD30W
• Compatibility: iPhone 12 and later models with MagSafe case or Magnetic case
• Extendable Length: 115mm to 165mm
• Output: Up to 15W wireless charging
• Input: Type C

Product Usage Instructions

Mounting the Charger

1. Ensure your car’s air vent blades are flat for proper mounting.
2. Extend the charger from 115mm to 165mm to fit your device.
3. Attach the charger securely to your car’s air vent.

Charging Your Device

1. Make sure your iPhone is compatible with the charger (iPhone 12 or later models).
2. Use only official MagSafe cases or Magnetic cases for charging.
3. Connect the Type C input to a suitable adapter with a maximum output of 5V/1A.
4. Place your iPhone on the wireless charger, ensuring it is properly aligned.

Troubleshooting

If your iPhone stops charging due to temperature issues:

• Move your iPhone to a cooler or warmer location as needed.
• If the device is in use, put it to sleep to resume charging quickly.

Universal Wireless Charging Car Mount

Car Charger Features

• Material: ABS+PC
• Input: DC 12-24V⎓3A
• Total Output:30W max
• Type C Output:5V⎓3A 9V⎓3A 12V⎓2.5A
• PPS:3.3-11V⎓3A
• Smart IC for auto-voltage detection

Wireless Specifications

• Input: DC 5V3A-9V2.22A
• Output: 5W-15W
• Transmission distance: ≤5mm

Wireless Features

• A circle of powerful magnets works perfectly with the iPhone 12 and later, to make your phone safer.
• It can be safely connected to your car’s air vent thanks to the super durable adjustable hook with an anti-fall system.
• Perfect match with iPhone 12 and later or Qi-enabled phones at up to 15W.

Wireless LED indicator

• Standy: Blue LED Light
• Charging/Fully Charged: Blue LED Light off
• FOD Warning: Blue light flashing

Work MagSafe® Compatible Devices
Up to 15W wireless charging for iPhone 12 and later models.

Choosing the right adapter

Note

• Only for iPhone 12 or later Series (MagSafe Case Friendly)
• Please use a case with an official MagSafe or third-party case, Not applicable to other phone cases.

• With iOS 16, charging is put on hold when your iPhone becomes too hot or too cold to charge. When the following screenshot occurs.
• To resume charging your iPhone as quickly as possible, move it to a cooler or warmer location, or if your iPhone is in use, put it to sleep.
  Suppose a temperature warning screen appears.

To resume use of your device as quickly as possible, turn it off, move it to a cooler environment (away from direct sunlight), and allow it to cool down.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Frequently Asked Questions

Q: Can I use this charger with other phone models?

A: No, this charger is specifically designed for iPhone 12 and later models with MagSafe or Magnetic cases only.

Q: Why is my iPhone not charging when using the charger?

A: Make sure your iPhone is properly aligned on the charger and that it is not too hot or too cold for charging to resume.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>