qi2 IC-90CSQ Magnetic Wireless Car Charger User Manual
- August 17, 2024
- Qi2
Table of Contents
qi2 IC-90CSQ Magnetic Wireless Car Charger
Product Information
Specifications
- Input: DC 9V/3A, 5V/3A
- Output: 15W/5W Qi2
- Charging Distance: 10mm
- Charging Efficiency: 80%
- Product Dimension: 6442.564mm
- Product Material: ABS
Product Features
- The product surface has snowflake logo, built-in strong magnets for one-hand operation.
- Built-in smart semiconductor chilling plate and cooling fan for efficient wireless charging.
- Standby mode with green LED indicator.
- FOD function to prevent charging interruptions from metal or magnet objects.
- Protective functions for over-voltage, over-current, over-temperature, and short-circuit protection.
Product Operating Guide
- Connect the product to power before use.
- Charging stops if current is too large or issues are detected.
Attention
- Avoid extruding or colliding with the product.
- Avoid dismantling, exposure to fire or water when powered on to prevent short circuit or leakage.
- Avoid use in extreme temperature, humidity, or corrosive environments to prevent damage.
- Avoid placing magnetic strips or chip cards on the charging pad.
- Avoid placing metal objects on the charging pad during charging to prevent damage.
Product Features
-
The product surface has snowflake logo, built-in strong magnets,easier for one-hand operation.
-
Built-in smart semiconductor chilling plate and cooling fan, the fan will start working when the wireless charging starts,the chilling plate cools the wireless charging coil and the phone surface simultaneously to improve the wireless charging efficiency.
The semiconductor chilling plate stops working when the phone is removed. -
Standby mode: the LED indicator keeps green.
-
Charging mode：The colorful lights of the fan change gradually,the light goes off once removed the receiver.
-
FOD function: when put metal or magnet objects on the charger,the wireless charging stops working and the phone does not charge.
-
Perfect protective function based on over-voltage, over-current,over-temperature and short-circuit protection.
Product Operating Guide
- Please make sure the product connect to the power before using.
- The product stop charging when the current is too large or there is foreign object. Do not wireless charging the phone if similar situation happened.
- Please purchase the wireless receiver module or case separately (Not included in the product) if your phone do not support wireless charging.
- The power input is 9V-12V, when placed the phone and wireless charging starts, the chilling plate works and the fan rotates. When the phone is removed, the chilling plate stops working and the fan stops rotating 30 seconds later.
- It is recommended to use phone case less than 2mm thick. The product cools the phone backside surface,too thickness phone case will affect the cooling effect.
Product Parts Description
Parts List
- Charging Transmitter Coil
- Magnet
- PCB
- Electronic Refrigeration
- Type-C Charging Port
- Cooling Fan
- Knob
- Vent Clip
Specifications
| Input | DC 9V/3A,5V/3A |
|---|---|
| Output | 15W/5W |
| Product Standard | Qi2 |
| Charging Distance | 10mm |
| Charging Efficiency | 80% |
| Product Dimension | 6442.564mm |
| Product Material | ABS |
Fast wireless charging requires QC or PD adapters.
Attention
- Please do not vigorously extrude or collide.
- Please do not dismantle or put it into fire or water when the product is power on,to avoid short circuit or leakage.
- Please do not use it in severely high temperature,high humidity or corrosive environment,to avoid damage to the circuit leakage.
- Please do not put the magnetic strip or chip card (Such as ID card,bankcard etc.)on the charging pad to avoid to cause magneticcard lose efficacy.
- Please do not put the metal (Such as coin etc.) on the charging pad when charging,to avoid damage from heating.
Note: This product is applicable to all Qi standard wireless charging phones,other phones need an external receiver for wireless charging function.
Product Usage FAQ
Q: Can this wireless car charger be used with all phones?
A: This product is applicable to all Qi standard wireless charging
phones. Other phones require an external receiver for wireless charging
function.
Q: What happens if metal objects are placed on the charger?
A: The wireless charging stops working and the phone does not charge to
prevent any damage or interference.
Q: How do I know when the product is in standby mode?
A: The LED indicator will remain green when the product is in standby
mode.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>