MPP20-1TCNB-J Wireless Charger with QI2 Module User Manual
- July 30, 2024
- Qi2
Table of Contents
MPP20-1TCNB-J Wireless Charger with QI2 Module User Manual
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before using this product. Please keep this manual for reference in the future.
INTRODUCTION
This product is a wireless charging device in accordance with the QI protocol which is suitable for mobile phones, and other devices based on wireless charging 5W or 15W. Connect the wireless charger to a power supply and then you can charge your device which is supported wireless charging (mobile phones, etc.) by putting it on the wireless charger directly.
FEATURES
- Port input: Type-C PD: 5V3A 9V3A 27W
- Transmitting terminal output1: 15W Max
- Transmitting terminal output2: 5W Max
- It is light, smart and convenient to use
- Compatibility: iPhone 12 series, iPhone 13 series, iPhone 14 series, iPhone 15 series and other mobile phones compatible with QI protocol
SPECIFICATIONS
| Input | Type-C PD: 5V3A 9V3A 27W |
|---|---|
| Output | 15W Max (QI2 Module)5W Max (Air Pods) |
| Wireless Charging Frequency | 128kHz / 360kHz |
| Operation Temperature Range | 0 ~ 35°C |
| Operation Humidity | 10% ~ 90%RH |
|---|---|
| Magnetic Force | 7.6 ~ 12N |
| Over Voltage Protection | Yes |
| Under Voltage Protection | Yes |
| Size | 90.07 × 89.93 × 24.1mm |
| User Manual | English Version |
PACKING LIST
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
OPERATION
Operation Procedures
- Connect the wireless charger to the power adapter, and connect the power adapter to the power supply.
- Place your device (which supports wireless charging) on the wireless charger.
- Please take out the device after it is fully charged.
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to the power adapter which the output should be 5V3A, 9V3A. It is also compatible with PD protocol.
- Please unplug the wireless charger after using.
- Do not use the wireless charger with an electronic product which is not in conformity with the specifications, so as to avoid any problems caused by specification mismatching.
- It’s normal that wireless charger will be a little overheated in the use process.
- When the wireless charger stops working under some accidents, you need to check whether the device is compatible with this charger.
- Do not let the wireless charger close to fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger cannot work properly, please contact the store or distributor in your area.
- Do not place metal objects on the back of the phone while it is charging wirelessly
CONNECTION DIAGRAM
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>