JBL TUNE710BT Wireless Over Ear Headphones User Guide

TUNE710BT Wireless Over Ear Headphones

“`html

Product Information

Specifications

• Model: JBL TUNE710BT

• Driver size: Not specified

• Power supply: Not specified

• Weight: Not specified

• Headset battery type: Not specified

• Charging time: 2 hours for 5 minutes, 3 hours
  for full charge

• Music play time with BT on: Not specified

• Frequency response: Not specified

• Impedance: Not specified

• Sensitivity passive mode: Not specified

• Sensitivity active mode: Not specified

• Maximum SPL: Not specified

• Microphone sensitivity: Not specified

• Bluetooth version: Not specified

• Bluetooth profile version: Not specified

• Bluetooth transmitter frequency range: Not
  specified

• Bluetooth transmitter power: Not
  specified

• Bluetooth transmitter modulation: Not
  specified

• Maximum operation temperature: Not
  specified

Product Usage Instructions

Power On & Connect

1. To power on, press and hold the power button for 2
   seconds.

2. To enter pairing mode, power off the device and then hold the
   power button for 5 seconds.

Settings and Bluetooth Connection

1. Access the settings on your device and turn on Bluetooth.
2. Select JBL TUNE710BT from the list of available Bluetooth
   devices to connect.

Multi-Point Connection

1. You can connect a maximum of 2 devices to the JBL
   TUNE710BT.

2. To switch between devices, use the Bluetooth settings on each
   device.

Wired Listening Mode

1. To use the headphones in wired mode, connect the provided cable
   to the L and R ports.

Charging and Factory Reset

1. To charge the headphones, connect them to a power source using
   the provided charging cable.

2. To perform a factory reset, press and hold the reset button for
   5 seconds.

Led Behaviors

The LED indicators on the headphones will display different
behaviors based on the current status: Low battery, charging, fully
charged, Bluetooth connecting, Bluetooth connected, Bluetooth not
connected, and reset.

Frequently Asked Questions (FAQ)

Q: How do I know when the headphones are fully charged?

A: The LED indicator will show a solid light when the headphones
are fully charged.

Q: Can I use the headphones while they are charging?

A: Yes, you can use the headphones while they are charging.
However, it is recommended to let them fully charge before extended
use.

“`

quick start guide
WHAT’S IN THE BOX

power

on &

connect *

L

R

HOLD (2S)

• To enter pairing mode again, power off and then hold for 5 seconds.

ON

Settings Bluetooth

Bluetooth DEVICES JBL TUNE710BT
Now Discoverable

Connected

Choose “JBL TUNE710BT” to connect

Multi-point connection

1
Bluetooth JBL TUNE710BT

2

L

R

(Maximum 2 devices)

3
Bluetooth JBL TUNE710BT
press × 2

BUTTON COMMAND

press × 1 press × 2

HOLD (2S)

BIXBY/SIRI®/OTHERS

L

R

Wired listening mode

L

R

Charging

2HR

5MIN

3HR

LR
FACTORY RESET

HOLD (5S)

L

R

led behaviors

Low battery CHARGING FULLY CHARGED
R

BT CONNECTING BT connected BT NOT connected RESET
R

TECH SPEC

Model: Driver size: Power supply: Weight: Headset battery type: Charging time: Music play time with BT on: Frequency response: Impedance: Sensitivity passive mode: Sensitivity active mode: Maximum SPL: Microphone sensitivity: Bluetooth version: Bluetooth profile version: Bluetooth transmitter frequency range: Bluetooth transmitter power: Bluetooth transmitter modulation: Maximum operation temperature:

TUNE710BT 40 mm/ 1.6″ Dynamic Driver 5V 1A 220 g/ 0.485 lbs Polymer Li-ion battery (690 mAh/ 3.7 V) < 2 hrs from empty up to 50 hrs 20 Hz – 20 kHz 32 ohm 104 dB SPL@1 kHz 103 dB SPL@1 kHz 93 dB -40 dBV/Pa @1 kHz 5.0 A2DP V1.3, AVRCP V1.6, HFP V1.7 2.4 GHz – 2.4835 GHz < 10 dBm GFSK, /4 DQPSK , 8DPSK 45 °C

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>