FORTINET FortiGate 50G SFP Transceiver Module Device Setup User Guide
- September 25, 2024
- FORTINET
Table of Contents
FORTINET FortiGate 50G SFP Transceiver Module Device Setup
The Essentials
FortiCare
Register your device to activate FortiCare Support at
https://support.fortinet.com.
GUI
- Connect Port 1 to an Ethernet port or USB-RJ45 adapter on your computer using the provided Ethernet cable.
- Open a browser to https://192.168.1.99
CLI
- Connect a console cable (not included) to the Console Port
- Open a Terminal app using 9600-8-N-1
Default Login
https://192.168.1.99
Username: admin
Password: leave blank
Fortinet Documents Library
For getting started documentation, admin guides, up-to-date hardware manuals, and reference resources visit https://docs.fortinet.com/
FortiGate Cloud
Experience simplified cloud provisioning, security analytics, remote access,
hosted log retention, and reporting at https://fortigate.forticloud.com,
Forti Explorer Go Rapidly provision, deploy, and manage your Fortinet Security
Fabric Platform, free on iOS and Android: https://docs.fortinet.com/product
/fortiexplorer-go/
Package Contents
FortiGate 50G SFP
FG-50G-SFP
Setup
FortiExplorer Go
GU
CLI
FortiGate Cloud
Login to https://fortigate.forticloud.com using your Fortinet Credentials,
then click Add FortiGate and enter the Cloudkey.
Front FG-50G-SFP
- BLE / RESET Press to enable BLE; press and hold for system reset
- Signed Firmware BIOS Security Level Controlled by Signed Firmware Switch, see Admin Guide at https://docs.fortinet.com.
- PWR
- STATUS
- HA
- Ethernet Ports
- BLE Antenna
Rear FG-50G-SFP
- Power Input 12V DC, 100-240V AC, 50/60Hz adapter
- USB 3.0 Port (USB-A)
- CONSOLE Port (RJ-45) CLI management
- Signed Firmware Switch
- SFP Port (SFP)
- Ports (5x RJ-45) WAN, A – FortiLink, 3, 2, 1
Cautions and Warnings
- Environmental specifications
- Ambient operating temperature: 0°C to 40°C
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude)
Safety
Battery – Risk of explosion if the battery is replaced by an incorrect type.
Do not dispose of batteries in a fire. They may explode. Dispose of used
batteries according to your local regulations. IMPORTANT: Switzerland: Annex
4.10 of SR814.013 applies to batteries.
Batterie – Risque d’explosion si la batterie est remplacée par un type
incorrect.
This product is intended to be supplied by a Listed pluggable A via Class I
external power supply adapter using a power cord connected to a socket outlet
with an earthing connection.
Grounding — To prevent damage to your equipment, connections that enter
from outside the building should pass through a lightning/surge protector, and
be properly grounded. Use an electrostatic discharge workstation (ESD) and/or
wear an anti-static wrist strap while you work. In addition to the grounding
terminal of the plug, on the back panel, there is another, separate terminal
for earthing.
This product has a separate protective earthing terminal provided on the back of the product in addition to the grounding terminal of the attachment plug. This separate protective earthing terminal must be permanently connected to the earth with a green with yellow stripe conductor minimum size # 22AWG and the connection is to be installed by a qualified service personnel.
Regulatory Notices
Federal Communication Commission (FCC) – USA
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used by the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Innovation, Science and Economic Development (ISED) – Canada
This Class B digital apparatus complies with Canadian ICES-003.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This radio transmitter (Containing IC: 7280B-110T17) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except by IC multi-transmitter product procedures.
European Conformity (CE) – EU
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures. The product transmits within the frequency ranges and less than or
equal to the power listed below:
2402-2480MHz less than 10dBm This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and your body
Simplified EU Declaration of Conformity
This declaration is only valid for Fortinet products (including combinations
of software, firmware, and hardware) provided by Fortinet or Fortinet’s
authorized partners to the end-customer directly for use within the EU or
countries that have implemented the EU Directives and/or spectrum regulation.
Any Fortinet products not obtained directly from Fortinet or Fortinet’s
authorized partners may not comply with EU Directives and Fortinet makes no
assurances for such products.
This product complies with Directive 2014/53/EU.
Bureau of Standards Metrology and Inspection (BSMI) – Taiwan The presence
conditions of the restricted substance (BSMI RoHS table) are available at the
link below: (RoHS Table)
UK Conformity Assessed (UKCA) – United Kingdom
The product transmits within the frequency ranges and less than or equal to
the power listed below: 2402-2480MHz less than 10dBm.This equipment should be
installed and operated with a minimum distance of 20cm between the radiator &
your body. This product complies with Statutory Instrument 1206 Radio
Equipment Regulations 2017
The full Declaration of Conformity for this product is available in the link
below:
https://site.fortinet.com/ProductRegulatory/UK
Copyright © 2024 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments, and other conditions may affect performance results.
Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s SVP Legal and above, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet.
For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf..
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>