FORTINET FWF-50G-5G 60CM Forti WiFi AVFire Walls User Guide

FORTINET FWF-50G-5G 60CM Forti WiFi AV Fire Walls

The Essentials

Default Logins

 https://192.168.1.99
Username: admin
Password: leave blank

FortiWiFi
SSID: fortinet
Password: fortinet

Fortinet Documents Library

For a detailed administration guide, up-to-date hardware manuals and reference materials, visit https://docs.fortinet.com/

Support Resources

Register for FortiGuard updates, cloud management, firmware upgrades, technical support and warranty coverage at https://support.fortinet.com

FortiExplorer Go

Rapidly provision, deploy, and monitor Security Fabric components using a mobile device, https://links.fortinet.com/fg/FEXPGO

Package Contents

• **1x FortiWiFi Device

**

• 3x AC Adapter Plugs (US, EU, UK)
  

• 1x Ethernet Cable
  

• 1x QuickStart Guide
  

• 1x DC Power Adapter
  

• 8x Antennas (4x 5G, 3x WiFi, 1x GPS)
  

Setup

FortiExplorer Go

Enable Bluetooth on your iOS device.

Follow the on-screen instructions

GUI

Configure the management computer with dynamic IP https://192.168.1.99 or static IP 192.168.1.x and subnet 255.255.255.0

CLI

FortiGate Cloud

Visit https://forticloud.com to add your device using the Cloud Key Sticker.

Dual 5G Nano SIM Slots

SIM1 is primary, SIM2 is secondary; SIM type is 4FF – Nano SIM. Refer to the Admin guide for wireless configuration at https://docs.fortinet.com

Antenna Installation

Attach the provided antennas to the SMA connections: 5G, GPS, and WiFi.

Front FWF-50G-5G

1. Antenna Connector (8x SMA)

2. BLE / RESET Press to enable BLE; press and hold for system reset
    BLE connected
    BLE in discovery
    BLE off

3. Signed Firmware BIOS Security Level Controlled by Signed Firmware Switch, see Admin Guide at https://docs.fortinet.com
    Security Level 2 (default)
    Security Level 1
    Security Level 0

4. PWR
    Power detected
    Power not detected
   WIFI
    WiFi connected
    WiFi activity
    WiFi not connected
   STATUS
    Operating normally
    Booting up
    Device is off
   SVC 5G/4G/3G Link
    SVC connected
    SVC not connected
   HA
    HA enabled (normal)
    HA enabled (failover)
    HA disabled
   5G
    5G connected
    4G/3G connected
   Not connected

5. Ports LINK/ACT
    Connected
    Data activity
    Not connected
   SPEED
    Gbps
    100 Mbps
    10 Mbps or not connected

Rear FWF-50G-5G

1. Antenna Connector (8x SMA)
2. Power Input 12V DC, 100-240V AC 50/60Hz adapter
3. USB 3.0 Server Port
4. CONSOLE (RJ45) CLI management
5. Signed Firmware Switch
6. Ports (5x RJ45) WAN, A – FortiLink, 3, 2, 1

Cautions and Warnings

Environmental specifications

Ambient operating temperature: 0°C to 40°C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude)

Safety

Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.

Grounding — To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing.

Regulatory Notices

Federal Communication Commission (FCC) – USA

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 26cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada

This Class B digital apparatus complies with Canadian ICES-003.

Innovation, Science and Economic Development (ISED) – Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt
RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.

IMPORTANT: The device must be professionally installed and must use the supplied antenna.

2.54 dBi for 5GHz
2| Speed| F-0Q-FS-6156-001-00| Dipole| SMA| 0.31 dBi for 2.4GHz(WLAN)
2.54 dBi for 5GHz
3| Speed| F-0Q-FS-6156-001-00| Dipole| SMA| 0.31 dBi for 2.4GHz(WLAN)
2.54 dBi for 5GHz
4| Joymax| IHF-2120MPX9-W018| monopole| iPex MHF1| 1.53 dBi for 2.4GHz(BLE)

Professional Installation Instruction

1. Installation personnel
   This product is designed for specific application and needs to be installed by qualified personnel who has RF and related rule knowledge. The general user shall not attempt to install or change the settings.

2. Installation location
   The product shall be installed at a location where the radiating antenna can be kept 26cm from nearby person in normal operation condition to meet Regulatory RF exposure requirement. The installation applies to indoor location.

3. External antenna(s)
   Use only the antenna(s) that have been approved by the manufacturer. The non- approved antenna(s) may produce unwanted spurious or excessive RF transmitting power that may lead to the violation of FCC/ISED limit and is prohibited.

4. Warning
   Please carefully select the installation position and ensure that the final output power does not exceed the limit set forth in relevant rules. The violation of the rule could lead to serious federal penalty.

European Conformity (CE) – EU

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

 This equipment should be installed and operated with minimum distance 21cm between the radiator and your body.

Simplified EU Declaration of Conformity

This declaration is only valid for Fortinet products (including combinations of software, firmware and hardware) provided by Fortinet or Fortinet’s authorized partners to the end-customer directly for use within the EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinet’s authorized partners may not comply with EU Directives and Fortinet makes no assurances for such products.

This product is in compliance with Directive 2014/53/EU.

Note: The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/EU The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| FI| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK (NI)

Compliance with 2014/53/EU Radio Equipment Directive (RED)

In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

MHz(Uplink); 1805-1880MHz(Downlink) Band 7: 2500-2570MHz(Uplink); 2620-2690MHz(Downlink) Band 8: 880-915 MHz(Uplink);925-960MHz(Downlink)
Band 20: 832-862 MHz(Uplink); 791-821MHz(Downlink)
Band 28: 703-748 MHz(Uplink); 758-803MHz(Downlink) Band 34: 2010-2025 MHz
Band 38: 2570-2620 MHz
Band 40: 2300-2400 MHz
Band 41: 2496-2690 MHz
Band 42: 3400-3600 MHz
Band 43: 3600-3800 MHz| 24 dBm (Conducted)
Band 41: 2496-2690MHz| 27 dBm (Conducted)
5G NR| n1: 1920-1980 MHz(Uplink); 2110-2170 MHz(Downlink)
n3: 1710-1785 MHz(Uplink); 1805-1880 MHz(Downlink)
n7: 2500-2570MHz(Uplink); 2620-2690 MHz(Downlink)
n8: 880-915MHz(Uplink);925-960 MHz(Downlink)
n20: 832-862 MHz(Uplink); 791-821 MHz(Downlink)
n28: 703-748 MHz(Uplink); 758-803MHz(Downlink)
n38: 2570-2620 MHz
n40: 2300-2400 MHz
n41: 2496-2690 MHz
n77: 3300-4200 MHz
n78: 3300-3800 MHz| 24 dBm (Conducted)
n41: 2496-2690 MHz
n77: 3300-4200 MHz
n78: 3300-3800 MHz| 27 dBm (Conducted)

UK Conformity Assessed (UKCA) – United Kingdom

MHz(Uplink); 1805-1880 MHz(Downlink) Band 7: 2500-2570MHz(Uplink); 2620-2690 MHz(Downlink) Band 8: 880-915MHz(Uplink);925-960 MHz(Downlink)
Band 20: 832-862 MHz(Uplink); 791-821 MHz(Downlink)
Band 28: 703-748 MHz(Uplink); 758-803MHz(Downlink)
Band 34: 2010-2025 MHz
Band 38: 2570-2620MHz
Band 40: 2300-2400MHz
Band 41: 2496-2690MHz
Band 42: 3400-3600MHz
Band 43: 3600-3800MHz| 24 dBm (Conducted)
Band 41: 2496-2690MHz| 27 dBm (Conducted)
5G NR| n1: 1920-1980MHz(Uplink); 2110-2170 MHz(Downlink)
n3: 1710-1785MHz(Uplink); 1805-1880 MHz(Downlink)
n7: 2500-2570MHz(Uplink); 2620-2690 MHz(Downlink)
n8: 880-915MHz(Uplink);925-960 MHz(Downlink)
n20: 832-862MHz(Uplink); 791-821 MHz(Downlink)
n28: 703-748MHz(Uplink); 758-803MHz(Downlink)
n38: 2570-2620 MHz
n40: 2300-2400MHz n41: 2496-2690 MHz
n77: 3300-4200 MHz n78: 3300-3800 MHz| 24 dBm (Conducted)
n41: 2496-2690MHz n77: 3300-4200 MHz n78: 3300-3800 MHz| 27 dBm (Conducted)

Note: * Only with DFS bands certification

This equipment should be installed and operated with minimum distance 21cm between the radiator & your body.

This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017

The full Declaration of Conformity for this product is available in the link below:
https://site.fortinet.com/ProductRegulatory/UK

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

|

UK (NI)

---|---

February 10, 2024
Copyright © 2024 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s Chief Legal Officer, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

Customer Support

For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf

References

• Fortinet Document Library | Home
• Fortinet Document Library | Home
• LoginMgr
• ‎FortiExplorer Go on the App Store
• site.fortinet.com - /ProductRegulatory/UK/
• Welcome

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>