LOFFLER 5130 Run a Job Instructions
- September 25, 2024
- LOFFLER
Table of Contents
5130 Run a Job
Specifications:
- Product Model: FPi 5100/6100/7100/8100 Series
- Manufacturer: Francotyp-Postalia GmbH
- Product Name: Sealing System
- Refill Type: Sealing Solution
- Recommended Fluid: Sealing Solution (avoid using water)
Product Usage Instructions:
Refilling the Sealing Solution:
-
Open the Sealer bottle cover and remove the bottle from its
holder on the system. Place it on a flat surface. -
Unscrew the pressure-sensitive top and remove it from the
bottle. -
Pour sealing solution into the bottle until it reaches the fill
line. Avoid using water as it can lead to bacterial growth. -
Screw the pressure-sensitive top securely back onto the
bottle. -
Wipe off any excess fluid that may have spilled.
-
Put the bottle back into the holder and close the Sealer
cover. -
For first-time use or when the wick is dry, allow a brief
waiting period for the wick to get moist.
FAQ:
Q: Can I use water as a substitute for sealing solution?
A: While water is acceptable, it is not recommended due to
potential bacterial growth that can affect the sealer’s
performance. It is advised to use sealing solution for optimal
results.
Q: How often should I refill the sealing solution?
A: Refill the sealing solution when prompted by the warning
message on the display screen. Regularly check the fill level to
ensure smooth operation.
Q: What should I do if the sealing system does not work after
refilling?
A: If the system does not work after refilling, ensure that the
sealing solution is filled to the recommended level and securely
closed. Allow time for the wick to get moist, especially after the
first refill or when the wick is dry.
Run a Job | Operator Guide
Refill the Sealing Solution
A warning message appears on the display screen when it is time to replenish
sealing solution in the sealer bottle : To refill the bottle: 1. Open the
Sealer bottle cover and remove the bottle from its holder on
the system and place it on a flat surface. 2. Unscrew the pressure-sensitive
top and remove it from the bottle. 3. Pour sealing solution into the bottle
until it reaches the fill line.
NOTE: Water is an acceptable liquid to use in the Sealer, but is not
recommended. The use of water can result in bacterial growth that can inhibit
the performance of the sealer. 4. Screw the pressure-sensitive top securely
back onto the bottle. 5. Wipe off any excess fluid that may have spilled. 6.
Put the bottle back into the holder and close the Sealer cover.
NOTE: First time use of the sealing system, as well as situations in which the
wick has become dry, will require a brief waiting period to allow the wick to
get moist.
09/2022
Francotyp-Postalia GmbH | FPi 5100/6100/7100/8100 Series | P-FP63136_EN; Rev. 00 3-35
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>