LOFFLER iSeries Printing with the Bypass Tray User Guide
- June 1, 2024
- LOFFLER
Table of Contents
iSeries Printing with the Bypass Tray
User Guide
iSeries Printing with the Bypass Tray
Konica Minolta iSeries: Printing with the Bypass Tray
This guide will cover how to set paper at the machine and print using the
Bypass Tray with special paper types.
At the Machine:
1. From the home screen, select Copy.
Place paper in the bypass tray and align the guides. A pop up will appear on
the screen to confirm paper type and size.
2. Choose a thickness to best match the
Paper Type . A thickness range (g/m2)
will show in the upper-right corner.
• Plain Paper 60-90 g/m
• Plain Paper+ 91-105 g/m
• Thick 1 106-120 g/m
• Thick 1+ 121-157 g/m
• Thick 2 158-209 g/m
• Thick 3 210-256 g/m
• Additional options listed at copier.
*Note: If Paper Type Auto Detect is on, the machine will detect paper type after 1 sheet has passed through.
3. On right side of screen, confirm Paper Size. Select Custom Size and create
custom size if needed.|
---|---
At the Computer:
1. Open a document. Select File Print Printer Properties.
2. Select the Basic tab. Select the following options:
• Paper Tray: Bypass Tray
• Paper Type: Match the type to what should be set at the machine.**If the
Paper Type selected at the computer does not match the setting at the machine,
the machinewill pop up for user intervention.
Tip: Select Paper Settings for Each
Tray then Reflect Device Status to sync the paper type from the machineto the
print driver.
3. Once all settings are selected, select OK then Print.|
---|---
©2024 Loffler Companies
MN: St. Louis Park; Duluth; Mankato; Rochester; St. Cloud; Willmar; Grand
Rapids; Thief River Falls | Wl Eau Claire; La Crosse; Green Bay
IA: Sioux City; Spencer | NE: Norfolk | ND: Fargo; Grand Forks | SD: Aberdeen;
Sioux Falls