PARADOX RX1 Wireless Receiver Instruction Manual

PARADOX RX1 Wireless Receiver

Product Usage Instructions

Installation

1. Ensure the control panel is powered off before connecting the RX1 Wireless Receiver.
2. Connect the power input of the RX1 to a compatible power source (AC/DC 12V).
3. Place the RX1 in a suitable location within the wireless range of the control panel.
4. Connect the external antenna to the RX1 for optimal signal reception.
5. Power on the control panel and verify successful pairing with the RX1.

Pairing Remote Devices

To pair a one-way remote or wireless one-way zone transmitter with the system:

1. Access the control panel’s programming mode.
2. Follow the specific pairing instructions provided with the remote device or transmitter.
3. Test the functionality of the paired device to ensure proper operation.

Maintenance

Regularly check the status of the RX1 Wireless Receiver and its connections to ensure reliable performance.

FAQ

Q: What wireless modules are compatible with the RX1?

A: The RX1 is compatible with WC588P CO2 detector and SD738 smoke detector wireless modules.

Q: Can I use the RX1 with any Spectra SP Series control panel?

A: The RX1 is compatible with SP4000, SP5500, SP6000, SP65, and SP7000 control panels (V4.5 and higher).

Description

The RX1 Wireless Receiver adds wireless receiving capability to the Spectra SP Series control panels (V4.5 and higher). Adding the RX1 to an installation allows for the use of one-way remotes as well as wireless one-way zone transmitters with the system.

Features

• 32 wireless zones
• Transmitter signal strength display
• Maximum number of remote controls: 32
• In-field firmware upgradable via Paradox InField Firmware Upgrade software
• RF jamming supervision
• Low battery, tamper, and check-in supervision
• 2 PGM outputs follow buttons 1 and 2 on REM15, REM1, RAC1
• Wireless zone transmitter supervision

Compatibility

Control Panels

Spectra SP Series control panels V4.5 and higher (SP4000, SP5500, SP6000, SP65, and SP7000)

Wireless Modules

• REM15, REM1, RAC1 and REM101 remote controls
• DCT10, DCTXP2, DCT2 door contacts
• PMD1P, PMD75, PMD85 motion detectors
• WS588P smoke detector, WH588P heat detector, WC588P CO2 detector and the SD738 smoke detector

RX1 Overview

Feature Details

• Full Supervision
  The RX1 is fully supevised by the control panel, including low battery, tamper and check-in supervision. The RX1 also supervises wireless zone transmitters.

• On-board PGMs
  The RX1 includes two on-board PGMs which follow buttons 1 and 2 on REM15/REM1/RAC1 remote controls (PGMs are also programmable through the panel).

• LED Feedback
  The RX1 features two LEDs which provide feedback on RF reception quality and bus communication status.

• In-field Upgradability
  Upgrade the RX1’s firmware on-site using a 307USB Direct Connect Interface.

Specifications

• Power Input Voltage
  12 Vdc

• Frequency
  433 MHz or 868 MHz

• Sensitivity
  -110 dBm (433 MHz) or -106 dBm (868 MHz)

• Current Consumption
  25 mA

• Dimensions (no antenna)
  5.1 x 8.3 x 2 cm (2 x 3.25 x 0.78 in.)

• Operating Temperature
  0ºC to 50ºC (32ºF to 122ºF)

• PGM Outputs
  PGM1 and PGM2 – via PGM 13 and 14 of panel

• Antenna
  Monopole antenna; error correction algorithm.

TRX1-G2K rev03 – Printed in Canada 07/2012
Magellan, Spectra, and Spectra SP are trademarks or registered trademarks of Paradox Security Systems Ltd. or its affiliates in Canada, the United States and/or other countries. One or more of the following US patents may apply: 7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069, 5077549, and RE39406 and other pending patents may apply. Canadian and international patents may also apply. All rights reserved. Specifications may change without prior notice. © 2012 Paradox Security Systems Ltd.

PARADOXDOX.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>