PARADOX K38 Headquarters User Guide
- June 9, 2024
- Paradox
Table of Contents
- PARADOX K38 Headquarters User Guide
- KEYPAD OVERVIEW
- Zone Display:
- ARMING AND DISARMING
- To Regular Arm:
- TO ARM WHEN STAYING
- PANIC ALARMS
- Panic Alarm Type Button Combinations
- To view the alarms that occurred during the last armed period:
- T ROUBLE D ISPLAY ****
- To mute the keypad:
- To adjust the backlight level:
- To adjust the backlight delay:
- BYPASS PROGRAMMING
- CHIME PROGRAMMING
- Warranty
- Patents
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PARADOX K38 Headquarters User Guide
KEYPAD OVERVIEW
Zone Display:
Numbers [1] to [32] correspond to zones 1 to 32 respectively. Open or entry delay zones are illuminated, and flash in alarm.
[MEM] Alarm memory display
On = Alarm(s) occurred
[BYP] Bypass programming
On = Zone(s) bypassed
ARMING AND DISARMING
TO ARM WHEN LEAVING …
To Regular Arm:
TO ARM WHEN STAYING
To Stay Arm:
- Press the [STAY] key.
- Enter your [ACCESS CODE]‡.
To Sleep Arm:
- Press the [SLEEP] key.
- Enter your [ACCESS CODE]‡.
PANIC ALARMS
To send a silent or audible alarm to your monitoring station, press and hold
one of the following
combinations for 3 seconds.
Panic Alarm Type Button Combinations
Police Press [1] & [3] Medical Press [4] & [6] Fire Press [7] & [9]
A LARM M EMORY D ISPLAY ****
To view the alarms that occurred during the last armed period:
- Disarm the
- Press the [ MEM ]
- The corresponding zone numbers that were in alarm the last time the system was armed will appear on the screen.
- To exit, press [ CLEAR ].
T ROUBLE D ISPLAY ****
- Press the [ TBL ] The word ‘Trouble’ and the number(s) corresponding to the trouble(s) are displayed on the screen.
- Read the corresponding explanation of the trouble from the trouble list in the MG/SP User If no repair instructions are given, call your security company for repairs.
- To exit, press [ CLEAR ].
K EYPAD S ETTINGS
To mute the keypad:
Press and hold the [ CLEAR ] key for 10 seconds to enable or disable Keypad Muting.
To adjust the backlight level:
- Press and hold the [▲] key for 4
- Keys [1] and [2]
- Press [1], then use the [▲] and [▼] to
- To save and exit, press [ CLEAR ] or [ ENTER ].
To adjust the backlight delay:
- Press and hold the [▲] key for 4
- Keys [1] and [2] will
- Press [2], then use the [▲] and [▼] to
- To save and exit, press [ ENTER ].
BYPASS PROGRAMMING
Bypassed zones remained unarmed when the partition is armed.
- Press the [ BYP ]
- Enter your [ ACCESS CODE ]‡.
- The corresponding zone number will be displayed on the screen when Select the zone(s) you want to bypass by entering the two-digit zone number. For example, to enter zone 3, enter [0] then [3]. The corresponding zone indicator will flash.
- To save and exit, press [ ENTER ].
CHIME PROGRAMMING
A Chime Enabled zone will advise you every time it is opened by causing your keypad to beep.
- Press & hold the [ ] The word ‘Chime’ appears on the screen.
- Select the zones you want to Chime by entering the two-digit zone number. The corresponding zone number flashes. For example, to chime zone 2 enter [0] then [2]. The keypad automatically saves once the 2-digit zone number is entered.
- To save and exit, press [ ENTER ].
Warranty
For complete warranty information on this product please refer to the Limited Warranty Statement found on www.paradox.com/terms. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions.
Patents
US, Canadian and international patents may apply. Paradox is a trademark or
registered trademark of Paradox Security Systems (Bahamas) Ltd.
© 2022 Paradox Security Systems Ltd.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>