GLOBAL INDUSTRIAL 641651 LED Sign Projector Lens User Manual

: September 25, 2024
: GLOBAL INDUSTRIAL

Table of Contents

641651 LED Sign Projector Lens
Product Information
Specifications
Product Usage Instructions

641651 LED Sign Projector Lens

“`html

Product Information

Specifications

Model: LED Sign Projector
Dimensions: 9.45in x 5.12in x 3.35in
Weight: 7.87in
Lens Models: 641652, 641653, 641654, 641655, 641656, 641657,
641658, 641659, 641660, 641661

Product Usage Instructions

Installation and Replacing Lens

Unscrew the front cover of the projector.
Remove the spring on the lens and take out the lens.
Wipe the lens, place it into the lens slot with the opposite
side upward, and clamp the spring.
Reinstall the front cover to complete the installation.

Adjusting Lens Clarity

Turn the lens at the front of the machine to adjust clarity.
Closer projection distances require counterclockwise turning, while
further distances need clockwise turning.

Adjusting Rotation and Power

Use the switch at the rear of the lamp to set rotation or
stationary mode. The remote control can also power on/off and
adjust rotation settings.

Installing Projector

Drill screw holes in the installation position.
Insert explosion screws into the holes.
Align machine base bracket screw hole with the explosion screw
end.
Tighten the nut onto the explosion screw to complete
installation.

Note: The wall opening diameter should be 0.39 inches.

FAQ

Q: How do I adjust the projection rotation?

A: Use the switch at the rear of the lamp or the remote control
to set rotation or stationary mode.

Q: How do I replace the lens?

A: Follow the steps in the manual to unscrew the front cover,
remove the lens spring, clean the lens, and reinstall it.

“`

User’s manual
Customer Service US: 1-800-645-2986

Manual del usuario
Servicio de atención al Cliente US: 1-800-645-2986

Manuel de l’utilisateur
Service à la clientèle Canada: 888-645-2986

LED Sign Projector

Model: 641651 Lens Models: 641652, 641653, 641654, 641655,641656, 641657, 641658, 641659, 641660, 641661

9.45in

5.12in

3.35in

7.87in

Technical Information: Voltage: AC85-265V Power: 100W Heat Dissipation System: Aluminum radiator natural heat dissipation/ air cooling technology Weight: 7.28lbs Light resource: LED white light Material: Aluminum alloy Projection distance: 3-40 feet NOTE: 1. Before installing this device, please read the contents of this manual carefully. 2. The contents of this manual are prohibited from unauthorized use. 3. Please do not modify the equipment at will. 4. Make sure the lamp is disconnected before installation and maintenance. 5. Installation, operation and maintenance personnel must be familiar with the performance of the lamp before the operation. 6. Do not look directly into light.

Installation and Replacing Lens

Step 1: Unscrew the front cover of the projector.

Step 2: Remove the spring on the lens and remove lens.

Step 3: Before installing the lens, wipe the lens first, put the opposite side of the lens upward, put it into the lens slot to
clamp the spring.

Step 4: Reinstall the front cover of the
machine and complete the installation.

1

MODEL #

LED Sign Projector
Adjusting Lens Clarity:
Turn the lens at the front of the machine (indicated by a prompt label) and adjust until projection is clear. Note: The closer the projection distance is, the more the lens need to be turned counter-clockwise and the further the projection distance, the more the lens need to be turned clockwise.

Adjusting the logo to rotate or stationary. There is a switch at the rear of the lamp. Press the switch to rotate or remain stationary. The remote control can also be utilized to power on and off as well as adjusting to rotate or stationary.

Power On Turn On Rotate

Power Off Turn Off Rotate

Rotate/Static Button
Installing Projector
explosion screw wall hole
explosion nut bracket screw hole
1. Drill screw holes in the position to be installed. 2. Put the explosion screw into the punched hole. 3. Align the screw hole of the machine base bracket into the threaded end of the explosion screw. 4. Screw the nut into the thread at the end of the explosion screw until it is tightened and the installation is completed. Note: The diameter of the wall opening is 0.39 inches
2