VIAIR ‎400P Portable Compressor User Manual

VIAIR ‎400P Portable Compressor

IMPORTANT SAFETY INSTRUCTIONS

• Do not disassemble. Do not attempt repairs or modifications.
• Refer to qualified service agencies for all services and repairs.
• Do not use this product in or area where it can fall or be pulled into water or other liquids.
• Do not reach for this product if it has fallen into liquid.
• Use this compressor with 12-volt DC systems only.
• This product should never be left unattended during use.

WARNING: To prevent injury:

• Never allow children to operate this compressor.
• Close supervision is necessary when this compressor is being used near children.
• This compressor will become very HOT during and immediately after use.
• Do not touch any part of this compressor with bare hands, other than the ON/OFF switch during and immediately after use.
• Do not use this product near flames or explosive materials or where aerosol products are being used.
• Do not operate this product where oxygen is being administered.
• Do not pump anything other than atmospheric air.
• Never use this product while sleepy or drowsy.
• Do not use any tools or attachments without first determining the maximum air pressure for that tool or attachment.
• Never point any air nozzle or air sprayer toward another person or any part of the body.
• This air compressor is equipped with an Automatic Reset Thermal Protector, and can automatically restart after the thermal protector resets. Always cut off the power source when the thermal protector becomes activated.
• Wear safety glasses or goggles when operating this product.
• Use only in well-ventilated areas.

OPERATING INSTRUCTIONS

Please read and follow the operating instructions carefully to ensure that you will enjoy the convenience and best use of your air compressor.

1. Always operate the compressor AT OR BELOW THE MAXIMUM PRESSURE RATING of the compressor.
2. Refer to the Specifications section of this manual.
3. Always OBSERVE THE MAXIMUM DUTY CYCLE of the air compressor.
4. Refer to the Specifications section of this manual for details. Operations exceeding maximum pressure ratings and or duty cycles will result in damage to an air compressor.
5. Your air compressor is equipped with an AUTOMATIC THERMAL OVERLOAD PROTECTOR. This feature is designed to protect the air compressor from overheating causing permanent damage to your air compressor. The thermal overload protector will automatically cut off power to the air compressor should the internal operating temperature of the air compressor rise above safe levels during excessive use.
6. Should at any time during use, your air compressor automatically shut off, do not attempt to restart the air compressor. Turn the ON/OFF switch of the air compressor to the OFF position. The automatic thermal overload protector will automatically reset when the internal temperature of the air compressor drops below a safe level. After allowing the air compressor to cool off for about 30 minutes, you can safely resume use of the air compressor by turning on the air compressor.
7. Please note that you may experience a slight delay (about ½ second) of the compressor’s motor starting when the On/Off Switch is turned on while the compressor is pressurized (when there is pressure in the line that the compressor is connected to). This is a normal delayed reaction, not a Compressor ON/OFF switch malfunction.
8. It is strongly recommended that you keep the vehicle’s engine running while using the air compressor to prevent the discharge of your vehicle’s battery.
9. ONLY OPERATE THE AIR COMPRESSOR IN WELL-VENTILATED AREAS. Compressor performance is enhanced when operating a compressor with a vehicle engine running.

IMPORTANT: Engine must be running while using this compressor.

Before attaching the air compressor’s power cord to a power source, check to make sure that the ON/OFF switch of your compressor is in the OFF position. Attach the Positive battery clamp (Red) to the Positive terminal of the battery and the Negative battery clamp (Black) to the Negative terminal of the battery.

CAUTION: Your Portable Air Compressor is Moisture and Dust Resistant, but NOT WATER OR DUST PROOF. Never place the compressor in soft sand while running the compressor. Vibration from the compressor will cause the compressor to settle into soft sand, resulting in the compressor drawing in foreign particles. Never expose the compressor to water while running the compressor.

This air compressor comes with ¼” a quick connect stud. Your Inline Deflator comes with an extension coil hose with ¼” a quick coupler. Simply attach this multifunction extension coil hose to the ¼” quick connect stud and you are ready to inflate tires. The Inline Inflator/Deflator Hose can be used for both Airing Up and Airing Down. Please familiarize yourself with the following different functions of this versatile air tool:

TIRE INFLATION

1. Attach a quick connect coupler to an air compressor.
2. Push the tire chuck, with the lever in the upright position, down over the tire valve stem, and then push the lever down to the horizontal position to lock in place.
3. Check to make sure the Deflator Collar Lock is disengaged.
4. Turn the compressor switch on to begin inflation. When the desired pressure is reached, turn the compressor off.

CAUTION: To avoid overinflation, never exceed the recommended pressure on articles to be inflated. Bursting can cause serious injury.

HANDS-FREE CONTINUOUS DEFLATION:

1. Push the tire chuck, with the lever in the upright position, down over the tire valve stem, and then push the lever down to the horizontal position to lock in place.
2. Push the Deflator Collar toward the tire valve stem and turn the Deflator Collar clockwise to engage the lock.
3. When the desired pressure is reached, turn the Deflator Collar counterclockwise to disengage the lock.

IMPORTANT: Make sure the compressor sits upright while operating the compressor. Do not operate the compressor in any other position. Avoid tugging at the compressor to move it. Instead, move the compressor to the same side of the vehicle as the tires that are being aired up.

Always make sure the Portable Compressor’s 8ft. power cord is uncoiled and fully extended when using your air compressor to avoid overheating the power cord.

INTERMITTENT DEFLATION:

1. The intermittent deflation function offers fast downward pressure adjustments.
2. With the tire chuck attached to the tire valve stem, push the Deflator Collar toward the tire valve stem to decrease tire pressure.
3. Release the Deflator Collar to halt deflation.

INLINE PRESSURE GAUGE:

1. The 2-inch Inline Pressure Gauge provides convenient tire pressure monitoring when airing up or down. This eliminates switching back and forth between a tire chuck and a tire pressure gauge.
2. Please note that during inflation and deflation, due to air velocity, a pressure gauge cannot provide accurate pressure readings. Momentarily halt inflation or deflation to obtain accurate pressure readings.

SAFETY PRECAUTIONS

1. Always inflate tires to the manufacturer’s recommended tire pressures. Exercise extreme caution when driving with aired-down tires. Reinflate tires before high-speed roadway travel.
2. Never exceed 20 M.P.H. when driving with partially inflated tires.
3. Never make sharp turns while driving with reduced tire pressure.
4. Re-inflate tires before high-speed traveling onto roadways.
5. Use heat-resistant, minimum 200 PSI-rated working pressure extension hose. Do not use aftermarket hoses with less than 200 PSI working pressure. Some aftermarket hoses may not be suitable for use with this air compressor due to the heat and pressure typically generated by this type of air compressor.
6. The use of a close-ended tire chuck will cause excessive pressure buildup if the tire chuck is not attached to the tire valve stem while the air compressor is in operation.

IMPORTANT: Always use an Open-Ended tire chuck such as the tire chuck equipped on the Deflator/Inflator Coil Hose for tire inflation when using a compressor without an air tank.

CAUTION: The extension hose and fittings connected extension hose will become very HOT during and after use. If necessary, wear heat-resistant gloves to remove the hose from the compressor quick connect stud.

MAINTENANCE & REPAIRS

Your air compressor is equipped with a permanently lubricated, maintenance- free motor. Never try to lubricate the compressor. Regularly clean dust and dirt from compressor cooling fins and motor housing. All repairs should be performed by the Manufacturer or Manufacturer authorized service agencies only.

MODEL 400P SPECIFICATIONS

• Part Number: 40043 / 400P (12V)
• Motor Voltage: 12-volt
• Max. Current Consumption: 30 Amps
• Fuse: 40 Amps
• Motor Type: Permanent Magnetic
• Max. Intermittent Pressure: 150 PSI
• Max. Duty Cycle: 33% (20 on / 40 off) (Min. On/Off @ 72ºF & 100 PSI)
• Continuous Use @ 72ºF & 30 PSI: Approx. 40 Minutes
• Inline Pressure Gauge: 100 PSI
• Auto. Reset Thermal Protection: Yes

LIMITED WARRANTY

VIAIR Corporation warrants this product when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one year from its original date of purchase. To receive warranty service or repair, please contact VIAIR Corporation.

Returns should be made within one year of the date of purchase after a Return Goods Authorization (RGA) number has been assigned by VIAIR Corporation. To obtain RGA, fax a copy of your receipt to 949-585-0188. For complete warranty details, please visit: www.viaircorp.com/warranty

PLEASE NOTE: THIS WARRANTY COVERS PRODUCT DEFECTS ONLY; IT DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES AS RESULT OF MISUSE OR ABUSE.

This Manual is proprietary to VIAIR Corporation and no ownership rights are hereby transferred. No part of the Manual shall be used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated or transmitted by any means, for any commercial purpose, including without limitation, sale, resale, license, rental or lease, without the prior express written consent of VIAIR.

VIAIR does not make any representations, warranties, or guarantees, express or implied, as to the accuracy or completeness of the Manual. Users must be aware that updates and amendments will be made from time to time to the Manual. It is the user’s responsibility to determine whether there have been any such updates or amendments. Neither VIAIR nor any of its directors, officers, employees, or agents shall be liable in contract, tort, or in any other manner whatsoever to any person for any loss, damage, injury, liability, cost, or expense of any nature, including without limitation incidental, special, direct or consequential damages arising out of or in connection with the use of the Manual.

15 EDELMAN • IRVINE, CA 92618

• TEL: 949-585-0011
• FAX: 949-585-0188
• www.viaircorp.com

FREQUENTLY ASKED QUESTIONS

What is the VIAIR 400P Portable Compressor?

The VIAIR 400P Portable Compressor is a compact and powerful air compressor designed for inflating tires and various inflatables. It is known for its portability and ability to quickly and efficiently fill tires with air.

What distinguishes the VIAIR 400P Portable Compressor from other portable air compressors?

The VIAIR 400P stands out for its high-pressure capability, reliability, and fast inflation speed. It is suitable for a wide range of applications, from car tires to RVs and more.

What is the maximum PSI (pressure) that the VIAIR 400P Portable Compressor can reach?

The VIAIR 400P Portable Compressor can reach a maximum PSI of 100 PSI, making it suitable for inflating a wide variety of tires and inflatables.

Is the VIAIR 400P Portable Compressor powered by electricity or a different power source?

The VIAIR 400P Portable Compressor is typically powered by connecting it to a 12-volt power source, such as a vehicle's battery. It can be used with car batteries, RV batteries, or portable power sources.

What is the duty cycle of the VIAIR 400P Portable Compressor?

The duty cycle of the VIAIR 400P Portable Compressor can vary, but it often offers a duty cycle of 33% (20 on / 40 off) (Min. On/Off @ 72ºF & 100 PSI), which means it can operate for a certain period continuously before requiring a cool-down period.

What type of power cord or cables come with the VIAIR 400P Portable Compressor?

The VIAIR 400P Portable Compressor typically comes with power cables that have clamps for connecting to a 12-volt battery source, making it easy to use with various vehicles and batteries.

Does the VIAIR 400P Portable Compressor have an automatic shut-off feature?

Some models of the VIAIR 400P Portable Compressor include an automatic shut- off feature, which allows you to set the desired pressure level, and the compressor will automatically turn off when that pressure is reached.

What types of tires can the VIAIR 400P Portable Compressor inflate?

The VIAIR 400P Portable Compressor can inflate a wide range of tires, including car tires, SUV tires, truck tires, and even RV or trailer tires. It is versatile for various tire sizes.

Is the VIAIR 400P Portable Compressor suitable for off-road use?

Yes, the VIAIR 400P is often used for off-road adventures, as it can quickly reinflate tires after driving on rough terrain, ensuring you maintain proper tire pressure for safety and performance.

Can the VIAIR 400P Portable Compressor be used to inflate sports equipment and inflatables?

Yes, the VIAIR 400P is versatile and can be used to inflate various sports equipment, such as soccer balls, basketballs, and inflatables like air mattresses and pool toys.

What is the warranty period for the VIAIR 400P Portable Compressor?

Warranty periods for the VIAIR 400P Portable Compressor may vary, but they often range from 1 year to several years.

Can the VIAIR 400P Portable Compressor be used in extreme weather conditions, such as extreme cold or heat?

The VIAIR 400P is designed for a wide temperature range and can be used in various weather conditions. However, it's advisable to protect it from direct exposure to extreme heat or cold when not in use.

Is the VIAIR 400P Portable Compressor suitable for professional use, such as in a garage or tire shop?

While it's primarily designed for personal and recreational use, some professionals may find the VIAIR 400P Portable Compressor useful for quick tire inflation in the field or on the go.

How should I care for and maintain the VIAIR 400P Portable Compressor?

Proper care includes keeping it clean, checking and maintaining air filters, and periodically inspecting and lubricating moving parts to ensure its continued performance and longevity.

Is the VIAIR 400P Portable Compressor compatible with different valve types, such as Presta or Schrader valves?

The VIAIR 400P Portable Compressor is often compatible with both Presta and Schrader valves and may include adapters for various valve types, ensuring versatile use.

Where can I purchase the VIAIR 400P Portable Compressor?

You can typically purchase the VIAIR 400P Portable Compressor from authorized auto parts retailers, online marketplaces, or directly from the manufacturer to ensure you receive a genuine product.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:VIAIR ‎400P Portable Compressor User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>