ACT AC8351 32 Inch TV Wall Mount Installation Guide
- September 24, 2024
- ACT
Table of Contents
ACT AC8351 32 Inch TV Wall Mount
Specifications
- Product: TV Wall Mount
- Compatible with TVs: 32 – 55 inches
- Model: AC8351
- Manufacturer: ACT
- Origin: Made in China
- Address: Koolhovenstraat 1E, 3772 MT Barneveld, The Netherlands
- Warranty: 5 years
Pre-Installation
Before starting the installation, ensure you have all the necessary tools and components provided in the package.
Read the entire instruction before you start the installation and assembly.
CAUTION: Use with products heavier than the rated weights indicated may
result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and injury.
- IMPORTANT : Ensure that you have received all parts according to the component checklist before the installation.
- MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months)
You can find safety information at www.act- connectivity.com/safety. For service, manuals, firmware or updates visit www.act-connectivity.com
Assembly
Follow these steps to assemble the TV wall mount:
- Identify the different parts of the wall mount according to the instruction manual.
- Attach the brackets securely to the back of your TV using the provided screws.
- Locate a suitable wall area and mark the positions for drilling.
- Use a level to ensure the brackets are aligned correctly before securing them to the wall.
Installation
Proceed with the installation by following these steps:
- Drill pilot holes into the marked positions on the wall.
- Securely attach the wall mount to the wall using the appropriate screws and anchors.
- Double-check the stability and alignment of the wall mount before mounting your TV.
Frequently Asked Questions
Q: What is the maximum weight capacity of this TV wall mount?
A: The AC8351 model has a maximum weight capacity of XX lbs.
Q: Can this wall mount swivel or tilt for better viewing angles?
A: Yes, this TV wall mount offers both swivel and tilt functionality for
adjusting viewing angles.
Q: Is professional installation recommended for this product?
A: While DIY installation is possible, professional installation is
recommended for ensuring proper mounting and safety.
Made in China
ACT, Koolhovenstraat 1E, 3772 MT Barneveld, The Netherlands www.act-
connectivity.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>