ACT AC7870 4K HDMI Extender Set User Manual
- June 6, 2024
- ACT
Table of Contents
ACT AC7870 4K HDMI Extender Set
Introduction
Congratulations with the purchase of this high-quality ACT product! This product has undergone extensive testing by ACT’s technical experts. Should you experience any problems with this product, you are covered by ACT warranty. Please keep this manual and the receipt in a safe place.
Register your product now onwww.act-connectivity.com and receive product updates!
Packing contents
The following parts need to be present in the packing:
- 4K HDMI extender transmitter unit
- 4K HDMI extender receiver unit
- Power adapter: 2x 5.0V 2.0A
- Mounting kit: Screws, plugs and mounting tape
Features
- Extends 4K UHD HDMI signal over one CAT5e cable.
- Support resolution up to 1080P@60hz, 4K@30hz 4:4:4.
- HDCP 1.4 compliant.
- Audio support up to LPCM 2.0.
- Transmission range up to 100M over CAT5e.
- Suitable with use for chainable receiver ( AC7871 sold separately) for longer distance and multiple displays. Chainable up to 250 displays, with a max distance of 2.5KM max.
- Plug and play
Panel descriptions
Front Panel Transmitter unit
| RJ45 | Green LED = CAT5e linked |
|---|---|
| RJ45 | Yellow LED = Data transmission |
Back panel Transmitter unit
| Link | Green LED = Power on/off |
|---|---|
| Link | Blue LED = TX/RX linked |
| Power | DC 5.0V 2.0A |
Front panel Receiver unit
| EDID | Function |
|---|---|
| Press and hold 2 seconds | Copy receiver monitor EDID to transmitter. |
| RJ45 | Green LED = CAT5e linked |
| RJ45 | Yellow LED = Data transmission |
Back panel Receiver unit
| Link | Green LED = Power on/off |
|---|---|
| Link | Blue LED = TX/RX linked |
| Power | DC 5.0V 2.0A |
Installation diagram
Please note that the ( chainable ) receiver unit cannot work standalone and always need the transmitter unit.
Point to Point application
One to Multiple Display application By Daisy chain ( AC7871 chainable receiver sold seperately)
Technical specifications
| Connections | RJ45, HDMI |
|---|---|
| Connections (in) | RJ45, HDMI A (full-size) female (x1) |
| Connections (out) | RJ45. HDMI A (full-size) female (x1) |
| Max. extension distance | 100m |
| Data transmission | Zero latency, Real time transmission |
| Extension over | CATx |
| Extension cable | CAT5e |
| Video signal | HDMI |
| HDMI specification | HDMI High Speed |
| Max. resolution @ 60Hz | 1920 x 1080 |
| Max. resolution @ 30Hz | 3840 x 2160 4:4:4 |
| Video support | HDCP 1.4, EDID |
| Audio support | LPCM 2.0ch Stereo |
| Power supply x 2 included | Input: 100-240V~50/60Hz 0,5A |
Output: 5.0V 2.0A
Including mounting kit| Screws, plugs, mounting tape
Dimensions in mm ( W x H x D )| 88 x 30 x 110
Weight in grams| 460g ( transmitter + receiver )
Service and support
This user manual has been carefully written by ACT’s technical experts. If you have problems installing or using the product, please fill out the support form at the website https://support.act-connectivity.com/
Warning and points of attention
Due to laws, directives and regulations set out by the European parliament,
some (wireless) devices could be subject to limitations concerning its use in
certain European member states. In certain European member states the use of
such devices could be prohibited. Contact your (local) government for more
information about this limitations.
Always follow up the instructions in the manual*, especially where it concerns
devices which need to be assembled.
Warning: In most cases this concerns an electronic device. Wrong/improper use may lead to (severe) injuries!
When you connect the device to the mains, make sure it will not be damaged or subject to (high) pressure.
A power socket is needed which should be close and easy accessible from the device.
Repairing of the device should be done by qualified ACT staff. Never try to repair the device yourself. The warranty immediately voids when products have undergone selfrepair and/or by misuse.
Dispose of the device appropriately. Please follow your countries regulation for the disposal of electronic goods.
Please check below safety points carefully:
– Do not apply external force on the cables
– Do not unplug the device by pulling the power cable
– Do not place the device near heating elements
– Do not let the device come in contact with water of other liquids
– If there is any strange sound, smoke or odor, remove the device immediately
from the power outlet.
– Do not put any sharp objects into the venting hole of a product
– Do not use any damaged cables (risk of electric shock)
– Keep the product out of reach of children
– Wipe off the product with soft fabric, not water mop.
– Keep the power plug and outlet clean
– Do not unplug the device form the power outlet with wet hands
– Unplug the device when you don’t use it for a long time – Use the device at
a well ventilated place
*Tip: ACT manuals are written with great care. However, due to new technological developments it can happen that a printed manual does not longer contain the most recent information. If you are experiencing any problems with the printed manual or you cannot find what you are looking for, please always check our website www.actconnectivity.com first for the newest updated manual.
Warranty conditions
The ACT warranty applies to all ACT products. After buying a second-hand ACT product the remaining period of warranty is measured from the moment of purchase by the product’s initial owner. ACT warranty applies to all ACT products and parts, indissolubly connected or mounted to the product it concerns. Power supply adapters, batteries, antennas and all other products not directly integrated in or connected to the main product or products of which, without reasonable doubt, can be assumed that wear and tear during use will show a different pattern than the main product, are not covered by the ACT warranty. Products are not covered by the ACT warranty when exposed to incorrect/improper use, external influences or when opening the service parts of the product by parties other than ACT. ACT may use refurbished materials for repair or replacement of your defective product. ACT cannot be held responsible for changes in network settings by internet providers. We cannot guarantee that the ACT networking product will keep working when settings are changed by the internet providers. ACT cannot guarantee the working of web services, apps and other third party content that is available through ACT products
When my product gets defective
Should you encounter a product rendered defective for reasons other than
described above: Please contact your point of purchase for taking care of your
defective product.
Trademarks: all brand nannes are trademarks and/or registered of their
respective holders.
The information contained in this document has been created with the utmost
care. No legal rights can be derived from these contents. ACT cannot be held
responsible, nor liable for the information contained in this document
Documents / Resources
| ACT
AC7870 4K HDMI Extender
Set
[pdf] User Manual
AC7870, 4K HDMI Extender Set
---|---
| ACT
AC7870 4K HDMI Extender
Set
[pdf] Installation Guide
AC7870 4K HDMI Extender Set, AC7870, 4K HDMI Extender Set, HDMI Extender Set,
Extender Set