ZHONGYI M1106Q 3 In 1 Foldable Stand Magnetic Wireless Charger User Guide

September 24, 2024
Zhongyi

ZHONGYI M1106Q 3 In 1 Foldable Stand Magnetic Wireless Charger

Specifications:

  • Input: 5V/3A, 9V/3A
  • Phone Output: 15W/10W/7.5W/5W
  • Watch Output: 2W
  • Earphone Output: 5W
  • Input Interface: Type-C port
  • Conversion Rate (Phone): 80%
  • Product Size: 170 x 77 x 15 mm

Product Information

The 3-in-1 Foldable Stand Magnec Wireless Charger (Model M1106Q) is a compact charging station that can simultaneously charge three devices. It features wireless charging areas for phones, TWS earphones, and an Apple Watch. The charger also has an LED indicator light and a Type-C interface input. It can be used as a mobile phone bracket with a 90-degree free adjustment, keeping your desk organized and making your life easier.

Product Usage Instructions:

  1. Connect the charger to a 5V/3A or 9V/3A adapter using a Type-C quick charge cable to power on the charger.
  2. Place your phone on the wireless charging area to start charging.
  3. Position the Apple Watch on the magnetic charging area to initiate charging.
  4. Put your TWS earphone case on the designated wireless charging area to charge.

LED Indicator Instructions:

  • Standby Mode: Blue LED light remains on and turns off after 10 seconds.
  • Wireless Charging Phone: Blue LED light stays on and turns off after 10 seconds.
  • Wireless Charging TWS Earphone Case: Blue LED light remains on and turns off after 10 seconds. If flashing blue, there may be a foreign object on the charging pad.

Applicable Devices:

  • Smart Phones: Various iPhone models and Samsung Galaxy series, along with other devices with built-in wireless charging receivers or requiring an additional receiver.
  • SmartWatch: Compatible with Apple Watches from S2 to S9, Ultra, and Ultra2.
  • TWS Bluetooth Earphones: Works with AirPods 2, AirPods Pro, AirPods 3, Samsung Galaxy Buds, Huawei Freebuds series, and other TWS earphones with wireless charging cases.

Frequently Asked Questions

  • Q: What adapters are recommended for fast charging?
    • A: To ensure efficient charging, use a 5V/3A adapter for general charging and a 9V/3A or 12V/2A adapter for fast-charging phones.
  • Q: What should I do if the blue LED indicator light is flashing?
    • A: If the blue LED flashes blue, it indicates a foreign object on the charging pad. Remove the object before attempting to charge it again.
  • Q: Can I use this charger with non-listed devices?
    • A: The charger is compatible with devices listed in the manual; for other devices, check compatibility or consider using a wireless charging receiver if needed.

Notice

To ensure charging 3 devices safely and efficiently, you must use 5V/3A adapter and quick charge cable, if including 15W fast charging phones, you must use 9V/3A or 12V/2A adapter and quick charge cable (if not use the appropriate adapter and quick charge cable, the charger may not Charge phone fast, or may not charge 3 devices simultaneously, or may even damage the charger.)

Product Introduction

The 3-in-1 wireless charger stand, a compact charging house, powered from only one outlet, can charge 3 devices simultaneously. When charge your mobile phone, apple watches, and your Air Pods 2 or AirPods Pro or some other TWS, just put them on, and wireless charging will automatically start. It can be used as a mobile phone bracket as well, mobile phone bracket 90-degree free adjustment. All this will make your desk clean and tidy and make your life easier.

Product Appearance

Operation Steps

  1. Connect the charger to a 5V/3A, 9V/3A adapter through a type-C quick charge cable to switch on the power;
  2. Put your phone on and charge;
  3. Put the apple watch on and suck it up to charge
  4. Put your earphone case on and charge

LED indicator instructions

The blue LED light ① will keep on and turn off after 10 seconds when the wireless charging is in standby mode. When charging the phone wirelessly, the blue LED indicator light ① will keep on and turn off after 10 seconds When charging the TWS earphone case wirelessly, the blue LED indicator light ① will keep on and turn off after 10 seconds. Note: If the blue LED indicator light ① is flashing BLUE, an unknown object is being detected between the wireless charging pad by FOD (Foreign Object Detection). The device will not begin to charge until object is removed.

Applicable Devices

Smart Phone:

  • Apple: iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max,
    • iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus, iPhone 13 mini, iPhone 13, iphone 13 Pro
    • iPhone 13 Pro Max, iPhone12, 12Pro, 12Pro max, SE, 11, 11 Pro, 11Pro Max, Xs, Xs Max, XR, X, 8, 8 Plus.
  • Samsung: GalaxyS6, S6Edge, S6Edge+, S7, S7Edge, S8, S8+, S9, S9+, S10, S10+, S10e, S20, S20+, S20Ultra, Note5, Note8, Note9, Note10, Note10+, Note20, Note20Ultra.

lncluding other devices with wireless charging receiver built-in; other some devices need to add a wireless charging receiver.

SmartWatch:

Apple: iWatch S2, S3, S4, S5, S6, SE, S7, S8, S9, Ultra, Ultra2

TWS bluetooth earphones:

AirPods 2, AirPods Pro, AirPods 3 Sumsung Galaxy Buds, Buds+; Huawei Freebuds 2, 3, 4, 5; and other TWS (with wireless charging case).

Product Specification

  • Input: 5V/3A, 9V/3A
  • Phone Output: 15W/10W/7.5W/5W
  • Watch Output: 2W
  • Earphone Output: 5W
  • Input lnterface: Type-C port
  • Conversion Rate (Phone) : 80%
  • Product Size: 170 x 77 x 15 mm

Accessories List

  • Wireless Charger x 1,
  • Type-C quick charge cable x 1,
  • User manual x 1, Adapter x 1

Attention

  1. Please keep the charger away from water or other liquids;
  2. If you need to clean the charger, please make sure it is not switched on the power;
  3. Using the Environment temperature remains 0-25 ℃.

FCC Statement

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals