tp-link Festa F Series Ceiling Mount Access Point Owner’s Manual
- September 24, 2024
- tp-link
Table of Contents
Festa F Series Ceiling Mount Access Point
“`html
Product Specifications
-
Product Name: Festa AP_Ceiling Mount
-
Model Numbers: Festa F41, Festa F52, Festa
F54, Festa F61, Festa F65, Festa F67, Festa F76 -
Operating Frequencies (Maximum Transmitted
Power):- Festa F41: 2412MHz – 2472MHz (20dBm)
- Festa F52 / Festa F54 / Festa F61:
- 2412 MHz – 2472 MHz (20dBm)
- 5150 MHz – 5250 MHz (23dBm)
- 5250 MHz – 5350 MHz (23dBm)
- 5470 MHz – 5725 MHz (30dBm)
- Festa F67 / Festa F65:
- 2402 MHz-2480 MHz (10dBm)
- 2412 MHz – 2472 MHz (20dBm)
- 5150 MHz – 5250 MHz (23dBm)
- 5250 MHz – 5350 MHz (23dBm)
- 5470 MHz – 5725 MHz (30dBm)
- Festa F76:
- 2402 MHz – 2480 MHz (10dBm)
- 2412 MHz – 2472 MHz (20dBm)
- 5150 MHz – 5250 MHz (23dBm)
- 5250 MHz – 5350 MHz (23dBm)
- 5470 MHz – 5725 MHz (30dBm)
- 6105MHz – 6425 MHz (23dBm)
Product Usage Instructions
Installation
To install the Festa AP_Ceiling Mount, follow these steps:
- Choose a suitable location on the ceiling for mounting.
- Ensure proper power supply connections.
- Securely mount the device using appropriate hardware.
Configuration
To configure the device:
-
Access the device’s web interface using the provided IP
address. -
Follow the on-screen instructions to set up the desired
parameters.
Maintenance
Regular maintenance is essential for optimal performance:
- Check for firmware updates periodically.
- Clean the device and surrounding area to prevent dust
buildup.
Frequently Asked Questions (FAQ)
1. What should I do if the device causes radio
interference?
If the device causes radio interference, take adequate measures
such as adjusting its placement or contacting customer support for
assistance.
2. How can I access the device’s web interface for
configuration?
You can access the device’s web interface by entering its IP
address in a web browser and logging in with the default
credentials provided in the user manual.
3. Is it necessary to update the device’s firmware?
Regular firmware updates are recommended to ensure security
patches and performance improvements. Check the manufacturer’s
website for the latest firmware versions.
“`
Regulatory Compliance
Festa AP_Ceiling Mount
© 2024 TP-Link 1910013643 REV1.3.0
For Class B Ceiling Mount AP:
FCC Compliance Information Statement
Product Name: Ceiling Mount Access Point Model Number: Festa F41 / Festa F52 / Festa F54 / Festa F61 / Festa F65 / Festa F67 / Festa F76
Component Name
Model
I.T.E. Power Supply
T090060-2B1 (For Festa F41) T240050-2-POE (For Festa F52) T480050-2-POE (For Festa F54) T120100-2B1 (For Festa F61) T120120-2B4 (For Festa F65) T120200-2B4 (For Festa F67)
Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/ TV technician for help. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. Note: The manufacturer is not responsible
for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment. This
device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter. “To comply with FCC RF exposure compliance
requirements, this grant is applicable to only Mobile Configurations. The
antennas used for this transmitter must be installed to provide a separation
distance of at least 44cm (for Festa F67 / Festa F76) / 20cm (for other
models) from all persons and must not be colocated or operating in conjunction
with any other antenna or transmitter.”
For Festa F76: · FCC regulations restrict the operation of this device to
indoor use only. · The operation of this device is prohibited on oil
platforms, cars, trains, boats, and aircraft,
except that operation of this device is permitted in large aircraft while
flying above 10,000 feet in the 5.925-6.425 GHz band. · Operation of
transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
Product Name: I.T.E. Power Supply Model Number: T090060-2B1 / T240050-2-POE /
T480050-2-POE / T120100-2B1 / T120120-2B4 / T120200-2B4 Responsible party: TP-
Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: https://www
.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: · Reorient or relocate
the receiving antenna. · Increase the separation between the equipment and
receiver. · Connect the equipment into an outlet on a circuit different from
that to which the receiver is
connected. · Consult the dealer or an experienced radio/ TV technician for
help. This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1) This device may not cause harmful
interference. 2) This device must accept any interference received, including
interference that may cause undesired operation. Any changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has
been shown to comply with the applicable technical standards, FCC part 15.
There is no unauthorized change is made in the equipment and the equipment is
properly maintained and operated.
Issue Date: 2024-09-19
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
OPERATING FREQUENCY (the maximum transmitted power)
For Festa F41: 2412MHz – 2472MHz(20dBm)
For Festa F52 / Festa F54 / Festa F61: 2412 MHz – 2472 MHz (20dBm) 5150 MHz –
5250 MHz (23dBm) 5250 MHz – 5350 MHz (23dBm) 5470 MHz – 5725 MHz (30dBm) For
Festa F67 / Festa F65: 2402 MHz-2480 MHz (10dBm) 2412 MHz – 2472 MHz (20dBm)
5150 MHz – 5250 MHz (23dBm) 5250 MHz – 5350 MHz (23dBm) 5470 MHz – 5725 MHz
(30dBm) For Festa F76: 2402 MHz – 2480 MHz (10dBm) 2412 MHz – 2472 MHz (20dBm)
5150 MHz – 5250 MHz (23dBm) 5250 MHz – 5350 MHz (23dBm) 5470 MHz – 5725 MHz
(30dBm) 6105MHz – 6425 MHz (23dBm)
EU Declaration of Conformity
For Festa F76: TP-Link hereby declares that the device is in compliance with
the essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. For other models: TP-
Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-
link.com/en/support/ce/.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the
limitation of exposure of the general public to electromagnetic fields by way
of health protection. The device complies with RF specifications when the
device used at 20cm from your body.
National Restrictions
For Festa F52 / Festa F54 / Festa F61 / Festa F65 / Festa F67: Frequency band:
5150 – 5250 MHz: Indoor use: Inside buildings only. Installations and use
inside road vehicles and train carriages are not permitted. Limited outdoor
use: If used outdoors, equipment shall not be attached to a fixed installation
or to the external body of road vehicles, a fixed infrastructure or a fixed
outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within
the 5170 – 5250 MHz band. Frequency band: 5250 – 5350 MHz: Indoor use: Inside
buildings only. Installations and use in road vehicles, trains and aircraft
are not permitted. Outdoor use is not permitted. Frequency band: 5470 – 5725
MHz: Installations and use in road vehicles, trains and aircraft and use for
unmanned aircraft systems (UAS) are not permitted. For Festa F76: Frequency
band: 5150 – 5250 MHz: Indoor use: Inside buildings only. Installations and
use inside road vehicles and train carriages are not permitted. Limited
outdoor use: If used outdoors, equipment shall not be attached to a fixed
installation or to the external body of road vehicles, a fixed infrastructure
or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited
to within the 5170 – 5250 MHz band. Frequency band: 5250 – 5350 MHz: Indoor
use: Inside buildings only. Installations and use in road vehicles, trains and
aircraft are not permitted. Outdoor use is not permitted. Frequency band: 5470
– 5725 MHz: Installations and use in road vehicles, trains and aircraft and
use for unmanned aircraft systems (UAS) are not permitted. Frequency band 5945
-6425MHz: Restricted to indoor use, including in trains with metal-coated
windows and aircraft. Outdoor use, including in road vehicles, is not
permitted.
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017. The original UK Declaration of Conformity may be found at https://www
.tp-link.com/support/ukca
National Restrictions
For Festa F52 / Festa F54 / Festa F61 / Festa F65 / Festa F67 / Festa F76:
Attention: This device may only be used indoors in Great Britain.
UK
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire
de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Caution
For Festa F52 / Festa F54 / Festa F61: 1) The device for operation in the band
51505250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is
restricted to indoor operations in Hong Kong. For Festa F65 / Festa F67 /
Festa F76: 1) The device for operation in the band 51505250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor
operations in Hong Kong. DFS (Dynamic Frequency Selection) products that
operate in the bands 5250- 5350 MHz, 54705600MHz, and 5650-5725MHz.
Avertissement
Pour Festa F52 / Festa F54 / Festa F61: 1) Le dispositif fonctionnant dans la
bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur
afin de réduire les risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux; Pour Festa F65 / Festa F67 /
Festa F76: 1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est
réservé uniquement pour une utilisation à l’intérieur afin de réduire les
risques de brouillage préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux; Les produits utilisant la technique d’atténuation
DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz,
5470-5600MHz et 5650-5725MHz.
For Festa F76: · Devices shall not be used for control of or communications
with unmanned aircraft systems. · Operation shall be limited to indoor use
only. · Operation on oil platforms, automobiles, trains, maritime vessels and
aircraft shall be
prohibited except for on large aircraft flying above 3,048 m (10,000 ft). Pour
Festa F76: · Les appareils ne doivent pas être utilisés pour le contrôle ou la
communication avec des
systèmes d’aéronefs sans pilote. · Le fonctionnement doit être limité à une
utilisation en intérieur uniquement. · L’opération sur les plates-formes
pétrolières, les automobiles, les trains, les navires
maritimes et les avions est interdite, sauf sur les gros avions volant au-
dessus de 3 048 m (10 000 ft).
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 26cm (for Festa F76) / 25cm (for Festa F67) / 21cm (for Festa
F65) / 20cm (for other models) between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 26cm (pour Festa F76) / 25cm (pour Festa F67) /
21cm (pour Festa F65) / 20cm (pour les autres modèles) de distance entre la
source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
.
NCC Notice & BSMI Notice
Festa F52 / Festa F54 / Festa F61 / Festa F65 / Festa F67 / Festa F76
. .
Pb
Cd
Hg
CrVI
PBB
PBDE
PCB
—
—
1. “0.1 wt %” “0.01 wt %” . 2.””. 3.”–” .
, .
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed
Adapter shall be installed near the equipment and shall be easily accessible.
Use only power supplies which are provided by manufacturer and in the original
packing of this product. If you have any questions, please don’t hesitate to
contact us.
Operating Temperature: 0 ~ 40 (32 ~ 104 )
This product uses radios and other components that emit electromagnetic
fields. Electromagnetic fields and magnets may interfere with pacemakers and
other implanted medical devices. Always keep the product and its power adapter
more than 15 cm (6 inches) away from any pacemakers or other implanted medical
devices. If you suspect your product is interfering with your pacemaker or any
other implanted medical device, turn off your product and consult your
physician for information specific to your medical device.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Note: The Equipment marking is at the bottom/back of the device. Symbols may
vary from products. Symbol Explanation Class II equipment Class II equipment
with functional earthing Alternating current Direct current Polarity of d.c.
power connector For indoor use only
Dangerous voltage
Caution, risk of electric shock
Energy efficiency Marking
Protective earth Earth Frame or chassis Functional earthing Caution, hot
surface Caution Operator’s manual
Stand-by
“ON”/”OFF” (push-push)
Fuse
Fuse is used in neutral N
RECYCLING This product bears the selective sorting symbol for Waste electrical
and electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment. User has the choice to
give his product to a competent recycling organization or to the retailer when
he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods
Disconnection, all power plugs
m
Switch of mini-gap construction
Switch of micro-gap construction (for US version)
µ
Switch of micro-gap / micro-disconnection construction (for other
versions except US)
Switch without contact gap (Semiconductor switching device)
Mounting Requirements
For safety, we recommend you to use the original screws in the package when
mounting. The following are alternatives to mount the device on the wall:
· (For Festa F41) Use 3 screws which comply with ANSI B1.1 4# or 6# standard
and are longer than 7.5 mm.
· (For Festa F52 / Festa F54) Use 3 screws which comply with ANSI B1.1 4#
standard and are longer than 7 mm.
· (For Festa F61 / Festa F65 / Festa F67 / Festa F76) Use 4 screws which
comply with ANSI B1.1 4# standard and are longer than 15 mm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>