FOCI AD28 Bison L Vision Enhancement Imager User Guide

FOCI AD28 Bison L Vision Enhancement Imager

Important

This Guide is a general guide for a series of products, which means that the product you receive may differ from the description in the Guide. The actual product you receive shall prevail.

This Guide is prepared to introduce our products to the users. We will try our best to ensure the accuracy of the Guide, but the completeness of the Guide still cannot be guaranteed, because our products have been continuously upgraded. We reserve the right to modify at any time without prior notice.

Illustrations

|
---|---

iOS

|

Android

Appearance (P1~P2)

Rotate the zoom ring to the right to get a shorter focal length
4| Power Button| Short press: shutter compensation/wake-up/exit menu
Long press: power on/off
5| Up Button| Short press: integer magnification/change menu options
Long press: smooth step amplification/change menu options
6| Menu Button| Short press: bring up the shortcut menu/confirm to save the settings
Long press: bring up the main menu/exit the current menu without saving
7| Down Button| Short press: open the menu options of laser ranging/single ranging/change menu options
Long press: close the laser ranging/change menu options
8| Shutter Button| Short press: take a photo
Long press: Start/save recording
9| Visibility Adjustment| Rotate to adjust the eyepiece visibility
10| Battery Compartment| Space for installing batteries
11| Wristband Ring| Connect the wristband, Press to turn
12| Triangular Base Interface| 1/4 in standard interface
13| Type-C Port| Connect the PC and the external screen via type-C cable
14| MIC| Sound-recording port

Battery installation (P1)

• a. Press the battery compartment cover buckle and pull out the battery compartment cover;
• b. Insert 2 batteries according to the positive and negative indications;
• c. Push on the battery compartment cover;

Data transmission (P2)

• a. Start the device to ensure it is in power-on state;
• b. Connect the device to the PC via USB Type-C cable;
• c. Access the data stored in the device from the PC;

Connection to mobile APP

• a. Start the device to ensure it is in power-on state;
• b. Turn on the WiFi hotspot on the device;
• c. Search the WiFi hotspot name of the device through the mobile phone and connect;
• d. Open the Target IR APP on the mobile phone to get the real-time image of the device. Then you can control and access the device;

Detailed operation

Scan QR code for more instructions.

Fcc Warning

This equipment may generate or use radio frequency energy. Changes or modifications to this ~ailment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This unit complies with pan 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This unit may not cause harmful interference, and (2) this unit must accept any interference received, including interference that may cause undesired operation.

The unit has been evaluated to meet general RF exposure requirement. The unit can be used in potable exposure condition without restriction.

NOTE: This equipment has been tested and found to comply with the limits tor a Class B digital unit. pursuant to pan 15 of the FCC Rules. These limits are designed to provide reasonable protection against hannful interference in a residential installation. This equipmemt generates. uses and can radiate radlo frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radlo or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.

Customer Support

Providence Enterprise (Vietnam) Company Limited
Special statement: the version of the guide will be updated after the technical improvement of the product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>