vonhaus 2515382.1 1600W Corded Lawn Mower Instruction Manual

vonhaus 2515382.1 1600W Corded Lawn Mower

Technical Specifications

• Rated Voltage: 230V – 240V
• Rated Power: 1600W
• Rated Frequency: 50Hz

Product Information

Intended Use
Operate the power tool/machine for its intended purpose within specified parameters. For domestic use only. Not for persons with reduced capabilities unless supervised.

General Precautions

• Do not allow children to use as a toy.
• Do not use if malfunctioning or damaged. Contact Customer Services.
• Keep hair, clothing, and gloves away from moving parts. Use dust extraction facilities if provided.

Work Area Safety

• Keep work area clean and well lit.
• Do not operate in explosive atmospheres.
• Keep children and bystanders away during operation.

Cleaning & Maintenance

• Do not soak or immerse electrical components.

Components

• Safety Button
• Switch Lever
• Upper Support Bars
• Lower Support Bars
• Locking Knob Assembly 2x
• Wing Nut 2x
• Cable Relief

Product Usage Instructions

1. Ensure all components are present before assembly.
2. If any components are missing, contact customer services before proceeding.
3. Follow the assembly instructions provided in the manual carefully.
4. Before each use, check for any visible damage or faults.
5. Operate the product in a clean, well-lit area away from flammable materials.
6. Keep children and bystanders at a safe distance during operation.
7. Avoid wet conditions and always wear appropriate protective gear.

Frequently Asked Questions (FAQ)

• Q: Can this product be used in wet conditions?
  A: No, this product should not be used in wet conditions. Please ensure it remains dry during use.

• Q: What should I do if the power tool is not functioning properly?
  A: If the tool is not working correctly, do not use it. Contact Customer Services for assistance.

• Q: Can children operate this product?
  A: This product is not intended for use by children. Always supervise them around the power tool.

2515382.1

Please read all instructions carefully before use and retain for future reference.
CAUTION Do not immerse in water.
Wear a dust mask.
Protect your eyes.
Protective clothing must be worn
Protect your ears.
Protect your hands.
Do not use in wet conditions.
CAUTION Sharp edges.

Please read all instructions carefully before use and retain for future reference.

INTENDED USE
Only operate the power tool/machine for its intended purpose and within the parameters spec-ified in this manual.
This power tool/machine is for domestic use only. This power tool/machine is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless supervised or given appropriate instruction concerning the product’s use by a person responsible for their safety.

GENERAL PRECAUTION

• Do not allow to be used as a toy. Children should be supervised to ensure they do not play with the power tool/machine.
• If the power tool/machine is not functioning properly, has been dropped, damaged, left outdoors, or immersed in liquid, do not use, contact DOMU Brands Customer Services.
• Do not use the power tool/machine if any parts appear to be faulty, missing or damaged.
• Ensure all parts are securely attached before use.

RISK OF PERSONAL INJURY

• Avoid body contact with earthed or grounded surfaces such as pipes,radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

• Prevent unintentional starting. Ensure the switch is in the off position before connecting to the power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch, or energising power tools that are switched on, invites accidents. Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

• Always wear eye protection. Any power tool can throw foreign objects into your eyes and cause permanent eye damage. Always wear safety goggles (not glasses) that comply with ANSI safety standard Z87.1. Every day glasses have only impact resistant lenses.

• Do not expose power tools to rain or wet conditions. Water entering the power tools will increase the risk of electric shock.

• Stay alert, watch what you are doing and use common sense when operating a power tool/machine. Do not use a power tool/machine while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tool/machine may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
  protection used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.

• Carrying power tool/machine with your finger on the switch or energizing power tool/machine that have the switch on invites accidents.

• Remove any adjusting key or spanner before turning the power tool/machine on. A spanner or a key left attached to a rotating part of the power tool/machine may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool/machine in unexpected situations.

• Dress appropriately. Do not wear loose clothing or jewelry.

• Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tool/machine in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
• Power tool/machine create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool/machine. Distractions can cause you to lose control.

GENERAL POWER TOOL USE AND CARE

• Do not force the power tool/machine. Use the correct power tool/ma-chine for your application. The correct power tool/ma-chine will do the job better and safer at the rate for which it was designed.
• Do not use the power tool/machine if the switch does not turn it on and off. Any power tool/machine that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool/machine before making any adjustments, changing accessories, or storing pow-er tool/machine tools. Such preventive safety measures reduce the risk of starting the power tool/machine accidentally.
• Store idle power tool/machine out of the reach of children and do not allow persons unfamiliar with the power tool/machine or these instructions to operate the power tool/machine.
• Power tool/machines are dangerous in the hands of un-trained users.
• Maintain power tool/machines. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool/machines operation. If damaged, have the power tool/machines re-paired before use. Many accidents are caused by poorly maintained power tool/machines.
• Keep cutting tools sharp and clean.
• Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool/machine accessories and tool bits in accordance with these instructions, take into account the working conditions and the work to be performed. Use of the power tool/machine for operations different from those intended could result in a hazardous situation.

CLEANING & MAINTENANCE

• Never soak or immerse electrical components and or a component that has a plug attached.
• Disconnect the plug from the power source before mak-ing any adjustments, changing accessories, or storing. Such preventive safety measures reduce the risk of start-ing the power tool accidentally.
• Ensure the motor has fully stopped before cleaning, clearing a blockage, checking, or carrying out any maintenance on the tool.
• Maintain your power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired by a qualified repair person before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Regularly check external nuts and fixings to ensure vibration caused by normal use has not begun to loosen them. Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the Breaker.
• Locate the power tool out of reach of children, in a dry, locked unit.
• Make sure that the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
• Remove the plug from the mains socket/battery (where applicable) before carrying out any adjustment or maintenance.
• Always store the power tool/machine in a dry place.
• If the power cord is damaged, it must be replaced by a qualified service technician.
• Keep the ventilation slots and motor housing as free of dirt and dust as possible (where applicable).
• Clean the power tool/machine by rubbing it with a clean cloth and blow it clean using low-pressure compressed air is recommended.
• Ensure you have all the pieces listed. If you are missing any components, contact our customer services department at  support@domu.co.uk
• DO NOT proceed with assembly if any components are missing.

LAWNMOWERS

• Do not expose the Lawnmower to rain or wet conditions. Water entering the Lawnmower will increase the risk of electric shock.

• Always check the area to be worked on for wire and other debris that could cause potential damage to the Lawn-mower and injury to the operator.

• Always wear substantial footwear and long trousers whilst operating the Lawnmower.

• Never operate the Lawnmower without the Grass Catch-er in place, unless otherwise specified in this manual. Keep children, pets and bystanders away whilst operat-ing the Lawnmower. Distractions can cause you to lose control. Switch on the motor carefully according to in-structions and with feet well away from the blade.

• Do not start the Lawnmower whilst standing in front of the discharge opening. Keep clear of the discharge open-ing at all times. Do not use the Lawnmower if the switch does not turn it on and off. Any garden tool that cannot be controlled with the switch is dangerous and must be repaired. Do not tilt the Lawnmower when switching on the motor, except for if the machine has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator. Always keep your arms and legs a safe distance from the cutting mechanism, particularly after turning the appliance on.

• Do not put hands or feet near or under rotating parts. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  Walk, never run.

• Do not overreach. Keep proper footing and balance at all times. Always be sure of your footing on slopes. Always mow across the face of slopes, never up or down. Do not mow excessively steep slopes.

• Exercise extreme caution when changing direction on slopes. Use extreme caution when reversing or pulling the Lawnmower towards you.

• Do not transport the Lawnmower whilst the power source is running. If the Lawnmower has to be tilted when trans-porting it between areas, stop the blade before attempt-ing to move it. The same applies when crossing surfaces other than grass. If a foreign body or other debris ac-cidentally become entangled in the Lawnmower, stop it immediately. Disconnect from the mains and do not use again until cleared.

• If the Lawnmower makes any unusual sounds or starts to vibrate abnormally, stop it immediately. Disconnect from the mains and investigate the cause. Inspect for damage, tighten any loose parts and have any damaged parts re-paired or replaced.

TECHNICAL SPECIFICATION

• Rated Voltage 230V – 240V
• Rated Power 1600W
• Rated Frequency 50Hz

DECLARATION OF CONFORMITY

• We
• DOMU Brands Ltd
• 6th Floor The Tower
• Deva City Office Park
• Manchester
• M3 7BF
• DOMU Brands Ltd
• Unit 30, Finlan Road
• Stakehill Industrial Estate
• Middleton, Manchester
• M24 2RW
• Declare under our sole responsibility the product:
• SKU
• 2515382.1
• Description
• 1600W Corded Lawn Mower
• Complies with the essential requirements of the following directives:
• 2006/42/EC
• 2000/14/EC
• 2014/30/EU
• 2011/65/EU
• And the Standards
• BS EN 60335-1:2012+A13:2017 , BS EN 60335-2-77:2010, BS EN 62233:2008, EN 55014-1:2006+A1+A2
• EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013
• Authorised Signatory on behalf of DOMU Brands Ltd.

COMPONENTS

1. Safety Button
2. Switch Lever
3. Upper Support Bars
4. Lower Support Bars
5. Locking Knob Assembly 2x
6. Wing Nut 2x
7. Cable Relief
8. Wire Clip
9. Collection Basket Cover
10. Grass Collector Handle
11. Carry Handle
12. Rear Flap
13. Cutting Height Adjustment Lever
14. Grass Indicator

ASSEMBLY

Connect the LOWER SUPPORT BARS (4) with the UPPER SUPPORT BARS (3) using the WING NUTS (6)
The LOWER SUPPORT BARS (4) is fixed on the main unit through the engagement of the teeth on the LOCKING KNOB ASSEMBLY (5) Rotate to lock.

NOTE The CABLE RELIEF (7) should be added to the UPPER SUPPORT BARS (3) before assembling the support bars.

Click the CARRY HANDLE (10) into the top panel of the COLLECTION BASKET COVER (9)
Secure with screw provided.

NOTE To attach to the COLLECTION BASKET to the lawnmower, lift the REAR FLAP (12) and hook into place on the mounting points at the rear of the lawnmower

CUTTING HEIGHT ADJUSTMENT

When mowing high grass, start with the maximum cutting height and make a second cut with a lower cutting height.
Pull the CUTTING HEIGHT ADJUSTMENT LEVER (13) towards the rear wheel.

Moving the CUTTING HEIGHT ADJUSTMENT LEVER (13) towards the front will lower the ride height giving a closer cut.

GRASS INDICATOR

The GRASS INDICATOR (14) is equipped with a hatch that indicates the filling during operation.
When the hatch opens during operation, the grass collector has sufficient volume left to collect grass.
When the hatch closes, the grass collector is full and must be emptied.

OPERATION

Press and hold SAFETY BUTTON (1) then squeeze the SWITCH LEVER (2) towards the handle. Release the SAFETY BUTTON (1).
To stop the lawnmower, release the SWITCH LEVER (2)

IMPORTANT To prevent the machine switching on accidentally, the lawnmower is equipped with a SAFETY BUTTON (1) which must be pressed before the SWITCH LEVER (2) can be activated.
The lawnmower switches itself off when the switch is released.
Recommend to repeat this process several times with the blade removed so that you familiarise yourself with this functionality.

CUTTING BLADE MAINTENANCE & REMOVAL

IMPORTANT Disconnect the lawnmower from the mains and wait until the blade has stopped rotating before proceeding.
Use heavy-duty gloves or a cloth to grip the blade.

Replace this cutting blade after 50 hours mow-ing or 2 years whichever is sooner regardless of condition. If the cutting blade is cracked or damaged, you must immediately replace it with a new one.

Loosen the hex nut anti-clockwise using a suitable wrench (Size 16 mm) and remove it together with the cutting blade, the flat washer and the spring washer.
Replace the cutting blade with a new one of the same type.
Check the status of flange onto the spindle firstly, then attach the cutting blade, the flat washer, the spring washer and the hex nut in the correct order.
Tighten the hex nut clockwise with 45 Nm min, 50 Nm max. to ensure safe operation of your product.

CLEANING & MAINTENANCE

IMPORTANT Disconnect the lawnmower from the mains and wait until the blade has stopped rotating before proceeding.
Use heavy-duty gloves or a cloth to grip the blade.

• Keep all air vents and the motor housing free of dirt and dust where possible.
• Wipe the equipment with a clean cloth or clean with compressed air at low pressure.
• We recommend that you clean the lawnmower immediately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; Ensure to prevent water ingress into the motor.

Blade maintenance
Regularly remove grass and dirt from the blade.
At the beginning of the season, carefully examine the condition of the blade.

• If the blade is blunt, sharpen or replace the blade.
• If the blade is damaged or worn, fit a new blade.

DISPOSAL INFORMATION

Please recycle where facilities exist. Check with your local authority for recycling advice.

CUSTOMER SERVICE
If you are having difficulty using this product and require support, please contact support@domu.co.uk

WARRANTY

To register your product and find out if you qualify for a free extended warranty please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in its original packaging and accompanied by a relevant and completed returns form. This does not affect your stat-utory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for com-mercial or communal use.
COPYRIGHT All material in this instruction manual are copyrighted by DOMU Brands. Any unauthorised use may violate worldwide copyright, trademark, and other laws.

THANK YOU
Thank you for purchasing your product/appliance. Should you require further assistance with your pur-chase, you can contact us at support@domu.co.uk
VonHaus is a registered trademark of DOMU Brands Ltd. Made in China for DOMU Brands. M24 2RW.

References

• Free 2 year warranty | qualtiy you can trust | VonHaus

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>