KEYSTONE industries PK-242-051817 Universal Low Fusing Ceramic Fluorescent Spray Glaze Instruction Manual

PK-242-051817 Universal Low Fusing Ceramic Fluorescent Spray Glaze

“`html

Specifications

• Product Name: Prismatik Universal Low Fusing Ceramic
  Fluorescent Spray Glaze

• Manufacturer: Prismatik Dentalcraft, Inc. (a subsidiary of
  Glidewell Laboratories)

• Intended Use: Applying glaze on low-fusing porcelain fused to
  metal restorations and pressed/milled ceramic restorations.

• Storage Temperature: Between 0°C/32°F and 50°C/122°F away from
  sunlight or heat sources.

Product Usage Instructions

1. Shake Well: Shake the product well until the
   mixing ball moves freely inside.

2. Prepare Restorations: Prepare the restorations
   as customary for staining and glazing.

3. Application: Spray the glaze approximately 10
   to 12 inches from the restorations over dried and unfired
   stains.

Safety Instructions

• First Aid: In case of eye contact, flush eyes
  immediately with cool water for 15 minutes. Seek medical attention.
  For skin contact, wash thoroughly with soap and water. If
  swallowed, seek medical attention immediately.

• Safety Precautions: Keep out of reach of
  children. Use only outdoors or in a well-ventilated area. Avoid
  breathing gas. Wear protective clothing, eye protection, and OSHA
  approved safety goggles. Wash hands thoroughly after handling.

• Storage: Store the product between 0°C/32°F
  and 50°C/122°F away from sunlight or heat sources.

FAQ

Q: What should I do if I experience respiratory difficulty

while using the product?

A: Move to fresh air immediately and call a physician for
assistance.

Q: How should I dispose of empty cans of the product?

A: Empty cans should be disposed of in a manner consistent with
local regulations.

“`

Prismatik Universal

Low Fusing Ceramic Fluorescent Spray Glaze

Instructions for Use

ENGLISH

1. Product Description
Prismatik Universal Low Fusing Ceramic Fluorescent Spray Glaze for BruxZir® Solid Zirconia and Obsidian® Lithium Silicate Ceramic allows the dental professional to stain and glaze in one firing. Multiple units can be glazed in seconds for increased production efficiency and reduced labor costs. The product maintains restoration characterization and staining details and doesn’t puddle at margins. Contents: Ceramic Porcelain Powders, Isopropyl Alcohol, and Propellant. Coefficient of Thermal Expansion (CTE) (523 – 537°C) = (9.5 – 10.5) x 10-6/°C
2. Indications for Use
This device is to be used for applying glaze on low-fusing porcelain fused to metal restorations and pressed/milled ceramic restorations.
3. Contraindications
Do not use this product for purposes other than its intended use or in a manner different from the instructions stated in the document.
4. Instructions
1. Shake well until mixing ball moves freely inside. 2. Prepare restoration/s as customary for staining and glazing. Use glaze on low-fusing porcelain fused
to metal restorations and pressed/milled ceramic restorations. 3. Spray glaze approximately 10 to 12 inches from restoration/s over dried and unfired stains. For
optimum performance use short bursts while shaking/agitating can between sprays and buccal, lingual, mesial, distal and occlusal surfaces. 4. Spray multiple units simultaneously when placed on ceramic pillow tray. Be sure to shake can often when spraying multiple units. 5. Minor add-on repairs may be applied before spraying glaze on dental restoration/s. It will not discolor add-on. 6. Firing Schedule For BruxZir Solid Zirconia: Pre-Dry: 1 minute Start Temp: 950ºF (510ºC) Firing Rate: 100ºF (38ºC) High Temp: 1346°F – 1562°F (730°C – 850°C) Vacuum: None Hold Time: 1 minute For Obsidian Lithium Silicate Ceramic: Please use information from the user manuals for your product, available at: www.ObisidianCeramics.com/resources. 7. If glaze should settle on the underside or on metal surfaces of restoration/s, once the glaze dries, dust with a small short-bristled brush. 8. For optimal product performance you should turn can upside down and depress spray button between applications. This will clear the valve of any trapped or unused glaze that might cause a propellant leak from can.

PK-242-051817

IFU: 1420_3.0 REV ID: 8499
Page 1 of 2

5. Safety, Precautions, Warnings, Restrictions
First Aid: In case of eye contact, flush eyes immediately with cool water for 15 minutes. Seek medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, move to fresh air and call physician. If swallowed, get medical attention immediately. Keep Out of Reach of Children Disposal of Empty Cans: Units should be disposed of in a manner consistent with local regulations.
DANGER: US
Pressurized container; may burst if heated. Do not pierce or burn, even after use.

Extremely flammable aerosol. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame, any incandescent material, or other ignition sources.
Causes serious eye irritation. May cause drowsiness or dizziness. Do not get in eyes. Wear protective clothing, eye protection. Wear OSHA approved safety goggles. Wash hands thoroughly after handling. Avoid breathing gas. Use only outdoors or in a well-ventilated area.
DANGER: EU
Extremely flammable aerosol. Pressurized container: may burst if heated. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame, any incandescent material, or other ignition source. Do not pierce or burn, even after use.

Causes serious eye irritation. May cause drowsiness or dizziness. Wear protective clothing, eye protection.

To request the SDS for this product, call Glidewell Direct in the U.S. at 888-303-3975. 6. Storage
Store between 0oC/32oF and 50oC/122oF and away from sunlight or heat sources. 7. Questions/Comments
For questions and/or comments or for further information contact Glidewell Direct as directed below. 8. Symbols

Reference Number

Contents Under Pressure

Batch Code Date of Manufacture Use By Date By Prescription Only Consult Instructions for Use

Flammable Irritant European Authorized Representative Manufacturer Temperature Range

BruxZir is a registered trademark of Glidewell Laboratories. Obsidian is a registered trademark of Prismatik Dentalcraft, Inc. Prismatik Dentalcraft, Inc. is a wholly owned subsidiary of Glidewell Laboratories.

Engineered and Patented By Keystone Industries 52 West King Street Myerstown, PA 17067 800-333-3131 www.keystoneindustries.com USP: 8,529,257; EP: 1546052

Manufactured For Prismatik Dentalcraft, Inc. 2212 Dupont Drive Irvine, CA 92612, USA Tel: 844-255-2661 Fax: 800-579-8233

Glidewell Direct 18651 Von Karman Ave. Irvine, CA 92612 Within U.S.: 888-303-3975 Within Canada: 888-278-0414 Fax: 800-579-8233 www.glidewelldental.com

PK-242-051817

IFU: 1420_3.0 REV ID: 8499
Page 2 of 2

References

• Glidewell - Dental Lab Services, Products & Dental CE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>