Shenzhen Aiyi Digital Technology Y102 10.1 Cloud Photo Frame User Manual
- June 5, 2024
- Shenzhen Aiyi Digital Technology
Table of Contents
User Manual
-
POWER
After connecting the power adapter, the photo frame will automatically turn on..
When it is on, press and hold the power button for approximately 3 seconds to access the reboot or power off menu. A short press on the power button will turn off/on-screen（but leave the photo frame in on position）. -
USB
Connect a USB flash drive. USB is for service use only. -
RESET
Use a needle or paper clip to reset the unit. -
MicroSD card
Load external max 32GB microSD memory card here. -
DC
Connect DC adapter to power on the device.
Getting started
Thank you for purchasing your very own frame.
First, to set up your frame follow the “Quick start guide” included in the
package. If you are new to using frames then start by following the frame
quick setup on-page or follow the on-screen guide when powering it on for the
first time.
Once you have set up your Frame frame, start connecting it to your friends and
family.
Frame app
To send photos to your frame, use the frame app for iOS or Android
Find the frame app on:
Google Play by searching for “frame” or scan this QR code| App Store by
searching for a frame or scan this QR code
---|---
|
https://play.google.com/store/apps/details?id=net.frameo.app|
https://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=1179744119&mt=8
Frame quick setup
When starting your frame for the first time, you will need to set up the frame.
-
First, you start by selecting a language. This will be the language used throughout the frame.
-
Connect your frame to the internet by connecting it to Wi-Fi.
If a newer version of the frameo software is available, then you will be prompted with an update dialog. It is recommended to update your frame immediately if prompted. -
Enter your name, and the location where you have placed your frame e.g.” Living room”,” Kitchen” or “Office” and finally set the time zone if not correct.
Start using frameo
Start by connecting with your friends and family by providing them with a
unique code from your frame.
If you want to be able to send photos to the frame yourself, start by
downloading the app for iOS or Android on the App Store or Google Play. Then
use the code to connect your frame and app as described below.
Connecting a new friend:
- Make sure that your friend has downloaded and installed the frameo app
- Click the add friend icon on your frame . A dialog will appear showing a unique code that is valid for 12 hours.
- Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone call, to your friend.
- Once your friends have added the code in their frameo app, they will automatically appear on your frame and be able to send your photos.
Navigating your frameo
You interact with your frame through its touchscreen.
Swipe left or right to go through your photos.
To access the menu bar, simply tap once on the screen, this will show the
menu.
In the menu, you will find quick access to the add friends dialog and the
settings menu . From the menu, it is also possible to hide the currently shown
photo and adjust the
positioning of the photo.
Settings
Through settings, you can personalize your frame to your needs.
My frame
Frame name:
Changes the name of your frame. This is also the name the connected friends
and family will see in their list of connected frames.
Frame location:
Changes the location of your frame. This is the location displayed on your
friend’s and family’s list of connected frames which can helo to distinguish
frames from each other.
Set language:
Sets the language throughout your frame.
Set time zone
Sets the time zone that should be used on your frame.
Sleep mode:
Frameo offers a sleep mode that turns off the screen to reduce power
consumption while you are sleeping. e.g. Its default setting is to turn off
the screen at 23:00 and turn on the screen again at 07:00.
To change this just set the sleep mode start/end time.
Your frame is not powered down or on standby, so you will still be able to
receive photos during sleep mode.
Manage photos
Show/hide photos:
Select which photos to hide by tapping the particular photos you wish to hide.
Hidden photos will NOT be deleted from your frame, you can always select them
to be shown again.
Use to hides or show all photos.
Delete photos:
Select photos that you want to permanently delete from your frame by tapping
the photo.
Use to select or deselect all and to delete the selected photos
Import photos:
Allows you to import photos from an external max 32GB SD card.
Before you try to import photos from an SD card, make sure you have an SD card
with photos inserted into your frame.
Start by selecting the photos that you want to import onto your frame.
Once selected tap the import button to start the import process.
It is currently not possible to add a caption or define the most important
part of the photo when using the import function. Alternatively, add yourself
to your friend list and send them using the app.
My Friends
This list contains all the people that are allowed to send photos to your
frame.
Remove person
To remove a person from this list, thereby removing their permission to send
your photos, tap the delete icon . You will then be asked to confirm the
removal and if you would like to remove all photos received from this person.
Add person
To allow a new person to send you photos, simply tap the add friend button and
share the presented code in whatever way you prefer.
Display and slideshow
Timer
Define the duration a photo should be displayed.
Show caption
Sets whether or not to display the captions that your friends have sent with
the photo. Check to display captions. Uncheck to hide captions.
Brightness level
Adjust the brightness level of the screen.
Wi-Fi
Set which Wi-Fi the frame should be connected to. If you are connecting to a network with a captive portal a web browser icon should appear in the top right corner of the screen. Use this to open a browser where you can enter credentials to access the network.
Backup and Restore
Backup frame to max 32GB microSD card.
Tap to make a backup of your photos, friends, and settings. The time of the
latest successful backup will be displayed.
Any existing backup on the SD card will be overridden!
Automatic backup
If checked, your frame will automatically take a backup within 30 hours of you
receiving new photos or making changes to your frame.
Restore from backup
Before you attempt to restore your frame, start by confirming that your backup
is up-to-date.
To restore from a backup, you must first reset the frame. It is important to
note that you cannot restore to a new Frameo frame and keep the old frame
operational at the same time.
Reset frame
Removes all data from your frame. This will permanently remove all your
photos, friends/connections, and settings.
About
Check for update
Check if an update is available for your frame.
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously with improving the
frameo software.
We understand if you do not wish to share this data with us. Set checked if
you wish to help us improve frameo. Set unchecked to deny the sharing of
anonymous analytics data.
Guide
Opens the quick start guide, that was shown when you first started the frame.
Privacy
For more information regarding privacy, please visit
http://privacy.frameo.net
Warranty, Compliance, Support, and Safety information
For more information regarding warranty, hardware compliances, support, and
safety please refer to the material included in the package.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>