Shenzhen Suling Technology SE-668TS Queuing Wireless Calling System User Manual
- June 5, 2024
- Shenzhen Suling Technology
Table of Contents
Queuing wireless calling system
User Manual
SU-668TS
SU-669TS
Summary
Thanks for choosing the queuing wireless calling system. It adopts RF wireless
technology with millions of different learning codes. The system includes a
2o-channel call keyboard and portable buzzer& vibration receivers. Each
receiver is rechargeable and it has a number. In standby status, Superposition
of charging, while the client places an order, he(she) will be dispatched one
receiver with a number, when the order is ready, press the keypad to call the
number, and the client will get it through the buzzer/vibration/LED
indications.
The queuing system greatly improves the work of ciency and avoid the client
waiting in a long queue. It is widely used in fast-food restaurants, dessert
shops, Coffee houses, Pizza shops, auto 4S shops, or other queue occasions.
Why do you use?
- Minimize crowds in waiting for ling
- Reduce staff chaos & improve audience
- Notify people faster
- Improve work efficiency
- Enhances the restaurant’s image
Features
- zo-channels keypad call buttons
- Superposition charging
- Portable rechargeable vibration & buzzer receiver
- Independent storage memory avoids data lost
- High receive sensitivity
- Self-testing while powering on
- Beautiful and fashionable designing
Technical data
20 Keypad call button
Working voltage| DC 5V power adapter
Working frequency| 433.92MHz
Working current| 200±30M
Standby current| 60±10a/i
Encoder| Learning code (AM)
Dimensions| 165°14225mm
Material| ABS plastic
Operating temperature| -10t-60t
Transmitter distance| more than 500 1110terS(Undistorted °pea owe)
20Diagram off call button keypad
Function keys and instruction
20- channel keypad, press the number button. sends the wireless signal directly.
The function key” Mode “and” Learn” on the back of the pager could
beactivated by a pinpoint.
[RESET ] No operation
[ MODE ] Switch mode Vibration/Buzzer/Vibration+Buzzer
[ LEARN ] Short press into the Learning state long-press to clear
code
[ STOP ] Long press 2 sec to turn on / turn off
Technical data
Receiver
Working voltage| DC3.7V (rechargeable battery)
Charging voltage| DC5V
Working frequency| 433.92MHz
Standby current| <14±3mA
Working current| 70 t 20mA (buzzer)
100t20mA (vibration)
120t20mA (vlbratIon+buzzer)
Receive sensitivity| -107t2dBm
Battery capacity| 200mAh
Decoder| Learning code (AM)
Dimensions| 80•80•15mm
SU-669TS receiver schematic
Technical data
Receiver
Working voltage| DC3.7V (rechargeable battery)
Charging voltage| DC5V
Working frequency| 433.92MHz
Standby current| <14±3mA
Working current| 70 ± 20mA (buzzer)
100 ± 20mA (vibration)
120 ± 20mA (vibration+buzzer)
Receive sensitivity| -107±2dBm
Battery capacity| 200mAh
Decoder| Learning code (AM)
Dimensions| 808015mm
SU-669TS receiver schematic
Operation note
The setting of Prompt Mode The prompt or reminding mode could be Vibration /
Buzzer / Vibration + Buzzer, Touch the “MODE” button by a pinpoint, the pager
will show the present prompt mode and choose which mode you want.
The setting of Number Registration Touch the “learn” key, the pager LED
flashing, and then press a number 20- channel keypad, press the number button,
and send the wireless signal directly.
Working test: After Learning the code, press the number you want to call, and
the pager vibrates or LED flashes or sounds, you can press the [ STOP
] button to stop vibrating or Flashing or Sounding like a Battery charging
Please keep the pagers on the charger when not in use.
When the pager beeps and the blue LED flashes once every second, it needs to
be charged. When the pager is charging, the blue LED flashing every second,
enters the state of the charger. When the pager is fully charged, the blue LED
light is on.
If you want to find the pager but they are in charging, please call the number
and you can see the pager’s red LED light flashing.
Clear code: Long press the [ LEARN ] button, at the same time the
Red LED flashing, when you hear the buzzer chirping, it means clear code
successful.
Each rechargeable base could maximally support 20 pcs pagers
FAQ
| Problems | Reasons | Solutions |
|---|---|---|
| While powering on. the number display on the keypad is not on. | TM power | |
| adaptor is broken. | Change the power adaptor. | |
| The distance Of some receiver gals is near. | The power of the battery is low. |
Charge the batten/ in time.
The receiver cannot get any signal from the keypad call button.| The pairing
is deleted: The number is not cowered.| Pelt the receiver again to the keypad.
Forget the number of receives.| | Delete the pairing first. than Pelt It
again.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>