HAMMER 2 Lite Watch Instruction Manual

HAMMER 2 Lite Watch

FAQs

Q: Is the Hammer Watch 2 Lite a medical device?

A: No, the watch is not a medical device and should not be used as a replacement for medical diagnosis or treatment.

Q: How do I ensure safety while using the product?

A: Follow all safety guidelines provided in the manual and do not use the product without proper understanding of its safe usage.

IMPORTANT!

Hammer Watch 2 Lite is not a medical device and therefore cannot replace any medical diagnosis or proper treatment.

Safety of use

DO NOT RISK

All wireless devices may cause interference to other devices. Do not switch on the device when the use of mobile phones is prohibited (planes, hospitals) or if it might cause interference or danger.

QUALIFIED SERVICE

Only qualified personnel or an authorized service center may install or repair this product. Repairing the device by an unqualified or unauthorized service technician may result in damage to the device and void the warranty.

OPERATION

The device may be operated by mentally or psychologically disabled

people (including children) only under the supervision of persons responsible for their safety or after they have been properly trained and understood how to use the device safely. This device is not a toy.

WATER AND OTHER LIQUIDS

The device has a resistance certificate 3ATM. It means that the device is dust-proof and waterproof when all of the seals are intact. We also advise not to expose the watch to water or other fluids for no good reason. Water and other fluids do not have a positive effect on phone electronic components. If wet, wipe and dry the device as soon as possible. Make sure it is dry before connecting the charging cradle to the charging socket of your watch. Plugging the cable into a wet or damp outlet exposes it to slow corrosion and may cause problems with charging the smartwatch. If the following rules are not obeyed and a case of improper use is observed all the complaints concerning the device not being water- or dustproof will not be taken into consideration.

BATTERY AND ACCESSORIES

The battery can only be replaced by an authorized service center. Installing an incorrect battery type can cause an explosion. Avoid exposing the battery to very high/low temperatures (below 0°C/32°F and over 40°C/104°F). Extreme temperatures may influence capacity and battery life. Avoid contact with liquids and metal objects as it may cause partial or complete battery damage. Excessive charging of the battery can cause damage, therefore do not charge the battery longer than 12 hours (1 day an absolute max.) Please dispose of the battery according to the instructions. In case of the charger wire damage, it should be replaced with a new one. Use the original manufacturer’s accessories only.

Technical Specification

Additional functions

| Notifications, Activity, Steps, Heart rate,

Exercise, Exercise history, Saturation measurement, Breath measurement, Sleep measurement, Menstrual cycle, Alarm, Minuteman, Stopwatch, Messenger, Weather, Music control, World time, Camera remote, Flashlight, Find my phone

---|---
Compatibility| Android, iOS
Application| Hammer App

Package content

• Smartwatch Hammer Watch 2 Lite
• USB cable
• User manual
• Additional strap

If any of the above items is missing or damaged, please advise to keep the container in case of any complaints.

The appearance of the product (shape and colors) and menu may differ from the pictures and illustrations in this manual.

Arrangement of the smartwatch elements

Design of the watch

1. Screen
2. Main button/Knob
3. Button 2
4. Charging ports
5. Sensor set
6. Mic
7. Speaker

Using the touch screen

The touch screen will be turned off after some time of inactivity. To turn on the screen press the main button on the smartwatch. A touch screen of the device lets you easily select items or perform operations. The touchscreen can be controlled by the following actions.

Touch

Touch once to start an option, start an application, or select or launch the menu.

Swipe

Quickly swipe up, downwards (back to desktop), left or right (changes icon screens) to move the list or screen.

Charging the battery

Slide the USB end of the charger into the adapter and connect the other end to the charging sockets on the back of the watch. The cable automatically engages in the correct position thanks to a bipolar magnetic tip. When charging starts, the battery icon of the charging screen will change to an animated (main screen), a large animated icon in the middle of the screen (device off). Charge the battery before the first use. The battery should be charged using the USB cable and charger base provided. Use only chargers and cables approved by the manufacturer. Using incompatible chargers or cables can cause an explosion of the battery or damage to your device.

• If there is a problem with the battery or if it needs to be replaced, the device should be delivered to the manufacturer’s service center.
• When the battery is fully discharged, the device may not turn on, even if it is plugged and being charged.
• Improper connection of the USB plug may damage the device, cable, and/or charger. All damages resulting from improper handling are not covered by the warranty.
• The device can heat up during charging. It is a regular occurrence and should not affect the stability or performance of the device. When the icon’s animation stops, the battery is fully charged or the power of the source (portable charger, laptop) is depleted and the process can be completed.
• If the device does not charge properly deliver it, with the USB cable included, to a service center of the manufacturer.

Watch Operation

Switching the smartwatch on/off

• To turn on the device, press and hold the main button on your watch for about 3 seconds.
• To turn off the device, press and hold the main button until the message to turn off or restart the device appears. Then select, Turn off”.

Smartphone connection

• To connect Hammer Watch 2 Lite with a smartphone you need to download a corresponding app. You can download it by scanning the QR code below.
• After installing and launching the application, go to the “Device” tab and press “Connect”. Then add a device by selecting from the list of searched devices. Select the device that corresponds to the MAC number (you can find it by going to the watch settings in the device information. After clicking on the name of the watch, the application will ask you to enter the number that will appear on the watch. After entering the number, the watch will automatically pair. For proper operation, complete all the required data at setup. All activity data will appear in the smartphone app. Depending on the terrain and weather conditions, it may take longer for the GPS signal to be detected. We recommend that the user does not move while receiving the signal

Changing the watch face

• You can change the appearance of the watch display in the smartwatch. To do this, you need to hold your finger on the active main screen of the watch until the option to select dials appears. Move left or right. To confirm the selected dial, press on it.

Main Desktop

• The smartwatch’s main desktop can be activated by clicking the smartwatch’s main button. On the dashboard, in addition to the time and date, as well as icons symbolizing the number of steps, the calorie burn counter, the result of the last workout, heart rate measurement, the status of the connection to the phone, and the battery charge status are displayed. Swiping the screen with your finger to the right or left takes you sequentially to step information, pulse measurement, workout, sleep measurement, and weather. Swiping the screen with your finger from bottom to top takes you to the watch’s pop-up menu. Swiping the screen with your finger
• from top to bottom takes you to messages. Swiping the screen with a finger from right to left, we go to recently opened applications. By clicking the smartwatch button again, we go to the main menu of the watch.

Measuring pulse

• The watch has a built-in function for measuring pulse. To start the measurement, swipe left on the screen to the first tab called “Heart rate”.

Receiving calls/SMS

The watch has the function of answering and disconnecting calls and reading SMS, for this purpose:

1. make sure the watch is paired with your phone using the appropriate app.
2. Enable permissions to receive notifications in the watch app (Go to Device -> Notification settings -> Enable options for Calls/SMS).
3. In the Bluetooth settings on the phone, connect to a device named, HW2_LITE”, during the process of pairing the watch with the app. During this process, the phone may ask for permission to pair with, HW2_LITE” to ensure that the watch can correctly receive notifications and make calls. You should accept the request to pair with, HW2_LITE”. If notifications will not work check whether the permissions are enabled in the phone settings, to do this, hold down the icon of the watch application on the phone until a message appears, select, About the application” -> „Permissions” -> allow for, SMS  andPhone”. When someone calls us, the watch vibrates, displaying the name of the contact if it is stored in the phone, or the phone number if it is not stored. In addition, a red handset icon will appear, which we can use to reject the call, or a green handset icon, which we can use to answer the call. The watch has a built-in microphone and speaker so that when you receive a call on the watch, you can talk through it. To do this, answer the call on the watch, then click the speaker icon, so it will be possible to hear the recipient from the watch’s speaker. In the case of an SMS, the watch will vibrate and show us a message notification. To read the message, click on the notification box that appears on the watch or go to the notification center. To do this swipe up when on the home screen.

Troubleshooting

In case of problems with the device, please refer to the following tips.

The watch doesn’t turn on

| Charge the battery. The device can be switched on when the battery power level is at least several percent.
---|---
The watch does not charge| Check that the watch’s charging sockets are correctly positioned on the charging ports
I cannot connect my watch to my smartphone| Check if you have the latest version of the application required to connect your watch to your phone and active Bluetooth.
If the problem persists, contact the service center.

Maintenance of the device

To extend the service life of the device:

• Avoid contact with liquids; it can cause damage to the electronic components of the device.
• Avoid very high temperatures for it can shorten the life of the device’s electronic components, melt the plastic parts, and destroy the battery.
• Do not try to disassemble the device. Tampering with the device in an unprofessional manner may cause serious damage to the device or destroy it completely.
• For cleaning use only a dry cloth. Never use any agent with a high concentration of acids or alkalis.
• Use the original accessories only. Violation of this rule may result in an invalidation of the warranty.
• • The packaging of the device can be recycled in accordance with local regulations.
• The symbol for cardboard.

Surroundings security

Turn off the device in areas where its use is forbidden or when it may cause interference or danger.

The manufacturer is not responsible for

any consequences caused by improper usage of the device and not obeying the above instructions.

| The software version can be upgraded without earlier notice.

Correct disposal of used equipment

The device is marked with a crossed-out garbage bin, in accordance with the European Directive 2012/19/EU on used electrical and electronic Equipment (Waste Electrical and Electronic Equipment – WEEE). Products marked with this symbol should not be disposed of or dumped with other household waste after a period of use. The user is obliged to get rid of used electrical and electronic equipment by delivering it to designated recycling points in which dangerous waste is being recycled. Collecting this type of waste in designated locations, and the actual process of their recovery contribute to the protection of natural resources. Proper disposal of used electrical and electronic equipment is beneficial to human health and the environment. To obtain information on where and how to dispose of used electrical and electronic equipment in an environmentally friendly manner user should contact their local government office, the waste collection point, or the point of sale, where the equipment was purchased.

Correct disposal of used battery

According to the EU directive 2006/66/EC with changes contained in EU directive 2013/56/UE on the disposal of batteries, this product is marked with a crossed-out garbage bin symbol. The symbol indicates that the batteries used in this product should not be disposed of with regular household waste but treated according to legal directives and local regulations. It is not allowed to dispose of batteries and accumulators with unsorted municipal waste. Users of accumulators must use the available collection points of these items, which allows them to return, recycle, and dispose of the accumulators. Within the EU, the collection and recycling of batteries and accumulators is subject to separate procedures. To learn more about existing procedures of recycling of accumulators please contact your local office or an institution for waste disposal or landfill.

The use of the manual

Consents

Without prior written consent of the manufacturer, no part of this manual may be photocopied, reproduced, translated or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storing in any systems of storing and sharing information.

Appearance

The device and screenshots contained in this user manual may differ from the actual product. Accessories attached to the set may differ from the illustrations included in the manual.

Trademarks

All brand names and product names are trademarks or registered trademarks of their respective companies.

The maximum radio frequency power

Declaration of Conformity with European Union Directives

mPTech Ltd. hereby declares that the Hammer Watch 2 Lite device is compliant with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet address:

https://hammerphones.com/support-hammer-watch-2-lite

References

• myphone-mobile.com
• myphone.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>