PHILIPS ATEX GentleSpace 3 Instruction Manual
- June 9, 2024
- Philips
Table of Contents
PHILIPS ATEX GentleSpace 3
WHAT’S IN THE BOX
FEATURES
WIGHT
DIMENSION
INSTALLATION
-
SMT (Standard suspension set)
-
BR (Mounting bracket set)
TABLE
Aisle orientation for High Rack Optic (HRO)
Inrush current
LED130S,
LED250S, LED170S LED350S
Electrical characteristics
Imax (A) 5,1 15,3
Tref (μs) 2300 61
MCB No. of driver max.
B-10 A| 8| 5
B-16 A| 12| 8
C-10 A| 12| 8
C-16 A| 20| 13
QR SCAN
The luminaire shall be installed by a qualified electrician and wired in
accordance with the latest IEE regulations or the national requirements. The
light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person During the
installation or maintaining the luminaire please use gloves to avoid spots on
the cover
To remove dirt spots use the following:
- Dust: use micro fiber cloths
- Fingerprints, etc. : use a cleaner for with antistatic properties.
ATTENTION
- OBSERVE PRECAUTIONS
- FOR HANDLING
- ELECTROSTATIC
- SENSITIVE
- DEVICES
To get an overview of all spare parts for a luminaire, please refer to detailed instructions in the service manual available via the Signify Service tag apps (Android and iOs).
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.
© 2022 Signify Holding
All rights reserved. This document contains information relating to the
product portfolio of Signify which information may be subject to change. No
representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed. The information presented in this document is
not intended as any commercial offer and does not form part of any quotation
or contract. Philips and the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding
or their respective owners.
- Signify Holding.
- The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>