MAXIM LIGHTING 52032 LED Bath Bar CCT Select Instructions

MAXIM LIGHTING 52032 LED Bath Bar CCT

Specifications :

• Item/Model Number: 52032
• Spec: LED Bath Bar CCT Select
• Lamping: 1 x LED 16W (Included)

Product Usage Instructions

• Before Getting Started

• Read the instructions carefully prior to assembling the product.

• When opening the package, use caution to avoid damaging the components. Remove all packaging materials carefully and keep them for future use.

• Assembly Area:
  Choose a clean, level, and spacious assembly area. Avoid hard surfaces that may damage the product. Make sure you have all necessary contents for assembly. Assemble the product near the installation location.

• Assembly Tips:

• Do not over tighten screws and bolts to prevent damage to threads.

• Avoid letting children play with the product.

• Lamp Care Instructions:
  Read the instruction sheet carefully before assembly and use.

• Caution: There is a risk of shock! Disconnect from power source before assembling or cleaning. Switch off, unplug, and allow the bulb to cool before replacing or cleaning. Use only the recommended bulb type and do not exceed the maximum wattage to prevent fire hazards. Check the product cord for any signs of wear or damage.

FAQ:

• Q: Can I use a different wattage bulb than recommended?
  A: It is advised to only use the recommended bulb type and wattage to prevent any safety hazards.

• Q: What should I do if I notice any damaged components during assembly?
  A: Stop assembly immediately and contact customer support for assistance on replacing the damaged components.

Item/Model Number: 52032
Spec LED Bath Bar CCT Select

Lamping I Ampoule: 1 x LED 16W (Included)
Please consult a qualified electrician prior to install
Made in China

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to install it.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.

• caution there is a risk of shock!
• Disconnect from power source before assembling  or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Check the product cord to be sure is free torn or frayed.
• WARNING: Wires must to be connected to low  voltage driver and should not be connected directly to live wire or a short may occur.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

Before getting, started, ensure the package contains the following components:

This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

WIRING DIAGRAM

DIMMER COMPATIBILITY

MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required

ITEM/MODEL : 52032
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.

LED DRIVER DIAGRAM

SCHEMATIC
FOR GENERAL REFERENCE ONLY

VERIFIED LIST OF TESTED DIMMERS

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Diva Caseta PD-6WCL
• Lutron Maestro MACL-153M
• DEAKO-Smart Dimmer
• DEAKO-Single Dimmer
• LEVITON 6672-L LEVITON DSL06

GENERAL COMPATIBILITY

TRIAC / FORWARD PHASE ELV / REVERSE PHASE Only at 120VAC
Due to inrush current, wattage should not exceed 150W on a 600W dimmer

IMPORTANT!

• If the control is not paired properly to LED fixtures, irreparable damage may occur.
• If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer
• MUST be installed by an experienced professional
• CRITICAL KNOWLEDGE of electronic lighting systems required

© 2023 MAXIM LIGHTING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>