OLIGHT Sphere Ambient Light with App Control User Manual

OLIGHT Sphere Ambient Light with App Control

IN THE BOX

• Sphere

• Adhesive Metal Badge

• USB Magnetic Charging Cable

Product Specifications

see Table 1 and Table 2

Table 2: USB Magnetic charging cable

Operating Instructions

Product overview, see Figure 1;

Before first use, please charge the product to unlock it, see Figure 2

Turn on in two ways, see Figure 3;

The switch is at the bottom of the product. Press the bottom switch or the top of the light ball (when the product is placed on a hard surface) to operate the product.

ON, see Figure 4;

When the light is off, press or double press to turn on.

OFF, see Figure 5;

When the light is on, double press to turn off.

Mode switching, see Figure 6;

When the light is on, press to switch the modes, and the output cycles through the following modes: white light → red light → red flash → colored light 1 → colored light 2 → colored light 3 → colored light 4 → white light. Release to select the desired mode.
Please note : Apart from white light, red light, and red flash modes, the default lighting modes can be replaced with static or dynamic colors in the app. Replacement method: While using replaceable lighting modes, select your preferred mode in the app, then turn the light off and it will be automatically memorized.

Change brightness level, see Figure 7;

When the light is on, press and hold to change the brightness level steplessly.

Turn on White Light Low, see Figure 8;

When the light is off, press and hold to enter the default White Light Low.

Lockout/unlock, see Figure 9;

Lockout : When the light is off, press and hold for 2 seconds until the default White Light Low is turned on and off.
Unlock : Press and hold for 1 second until the white light is on.

Auto sleep mode, see Figure 10;

When turned off, the light automatically enters sleep mode after 30 minutes of non-operation. In sleep mode, it cannot be controlled via the app and needs to be awakened before control is possible. To wake the light from sleep mode, charge it or press the switch.

Battery indicator, see Figure 11;

Green: 50%~100%; Yellow: 10%~49%; Red: < 10%; When the light is turned off, the battery indicator will flash once from top to bottom.

Application of adhesive metal badge, see Figure 12;

App Operating Instructions

Download the Olight App, see Figure 13;

Enter the device management interface, see Figure 14;

Continue operation without logging in, See Figure 15;

Enter the pairing mode, see Figure 16;

When the light is turned on (non Bash-A-Mole mode), press the switch three or more times in a row until the light flashes green, indicating that it’s in pairing mode. If the device is not added successfully within 3 minutes, re- enter the pairing mode.

Add a device, see Figure 17;

White light/colored light control interface, see Figure 18;

Music rhythm interface, see Figure 19;

Interaction interface, see Figure 20;

Group Control, see Figure 21;

On the device management page, users can create groups. After a group is created, all devices within the group can be controlled simultaneously.

Tap-to-Run

see Figure 22;

Log in to the Olight App, See Figure 23;

Smart Scenes (Tap-to-Run), see Figure 24;

In combination with Olight Obounds gateway, on the Scene page, users can create smart scenes to control devices based on device status, external environment, geographic locations, and timing function, allowing for custom effects.

Automation, see Figure 25;

Smart Scenes (Automation), see Figure 26;

Bash-A-Mole Function (Place the Sphere on a hard surface first):

• In the app’s interaction interface, users can enter or exit this mode.
• Interact with the lights to simulate the Bash-A-Mole. The light randomly turns on, and when users hit it, it flashes.
• Press the switch five or more times in a row to exit this mode.
• Automatically exits this mode after 30 seconds of non-operation.
  After exiting this mode, the light will enter the memorized mode.

Restore Factory Settings

Tap “Restore factory settings” in the app’s interaction interface, and the Sphere can be reset to the factory mode.
Note:
In lockout mode, the light cannot be controlled by the app. To use the app to control it, please unlock the Sphere first.

• Do not ingest the battery, as there is a Chemical Burn Hazard.
• If the small battery is swallowed, it can cause severe internal burns in just 2 hours and may lead to death. Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not replace the battery with an incorrect type that can defeat a safeguard, such as certain types of lithium batteries.
• Do not dispose of the battery in fire, a hot oven, or by crushing or cutting it, as it may result in an explosion.
• Avoid leaving the battery in extremely high-temperature environments, as it may cause an explosion or the leakage of flammable liquid or gas.
• A battery exposed to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

For Europe Frequency
Operation Frequency: BT: 2402MHz-2480MHz
Maximum Output Power: BT≤10dBm

Control distance≤25m
FCC ID: 2A44S-SPHERE
IC: 28283-SPHERE

EU Declaration of Conformity

Hereby Dongguan Olight E-Commerce Technology Co,Ltd declares that the equipment [Sphere] is in compliance with Directive 2014/53/EU and RoHS Directive 2011/65/EU & (EU) 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://www.olight.com/download
The light source of this luminaire is not replaceable:
when the light source reaches its end of life, the whole luminaire shall be replaced.

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste.
Instead, to protect human health and the environment, you should dispose of your waste equipment at a designated collection point for the recycling of WEEE, appointed by the government or local authorities. Proper disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Notice

This device complies with Industry Canada’s licence-exempt ICES standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-005.

WARRANTY

We are proud to offer a lifetime warranty in Australia, China, France, Germany, and the USA. We are also working hard to expand coverage to more countries, where we provide a 2 or 5-year warranty. The warranty covers defects in material and workmanship under normal use, excluding loss, theft, deliberate damage, or cosmetic damage. For complete warranty information, please visit Olight.com or your local Olight official website.

Australia Customer Support
contact@olightstore.com.au
Austria Customer Support
kontakt@olightstore.at
Canada Customer Support
cs@olightstore.ca
China Customer Support
Wechat: olightcs
France Customer Support
cs@olightstore.fr
Germany Customer Support
kontakt@olightstore.de
Italy Customer Support
contatto@olightstore.it
Japan Customer Support
cs@olightstore.jp
Korea Customer Support
olightkorea@olight.com
Spain Customer Support
contacto@olightstore.es
Thailand Customer Support
cs@olightstore.co.th
UK Customer Support
contact@olightstore.uk
USA Customer Support
cs@olightstore.com
For other countries and regions, please contact Global Customer Support
contact@olight.com

Dongguan Olight E-Commerce Technology Co., Ltd 3.4000.1035 A, 08. 20. 2024
4th Floor, Building 4, Kegu Industrial Park, No. 6 Zhongnan Road, Chang’an Town, Dongguan City, Guangdong, China.

References

• Olight | Illuminate Your World.
• Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>