battat BT1860 Squishy Stack Roller User Guide
- September 21, 2024
- BATTAT
Table of Contents
BT1860 Squishy Stack Roller
“`html
Product Specifications:
- Product Name: SQUISHY STACK – ROLLERSTM Foam Play Shapes
- Model Number: BT1860
- Recommended Age: 12 months and above
- Dimensions:
- Foam Cylinder: 8.25 inches (21cm) diameter
- Foam Half-Moon: 16.5 inches (42cm)
- Foam Wavy Ramp: 24 inches (61cm)
- Features: Foam shapes expand when opened
Product Usage Instructions:
-
Scan the QR code for video instructions on assembly and
usage. -
Cut open the packaging using scissors carefully to avoid
cutting the shapes. -
Allow the foam shapes to expand for at least 48 hours for best
results. -
Close the zippers securely and ensure pull tabs are hidden
beneath the lining to prevent children from unzipping the foam
shapes. -
Keep the product away from fire and heat sources to prevent
damage. -
Adult assembly is required.
Washing Instructions:
To wash the foam shapes, follow these steps:
-
Remove the covers carefully.
-
Wash the covers according to the washing instructions
provided. -
After washing, replace the covers by pulling on it with one
hand and pushing the foam piece with the other hand.
Options for Wrinkle Removal:
To remove wrinkles from the foam shapes, follow the washing
instructions provided above.
Warning:
Keep the product away from fire and heat sources to avoid
permanent damage.
Trademark Information:
SQUISHY STACK – ROLLERSTM Foam Play Shapes is a trademark of
Maison Battat Inc. Made in China.
Please retain this information for future reference. Remove all
packaging materials before giving to children.
FAQ:
Q: How can I clean the foam shapes?
A: You can wash the covers following the washing instructions
provided in the manual.
Q: What should I do if the foam shapes have wrinkles?
A: Follow the options for wrinkle removal mentioned in the
manual.
“`
PARTS LIST
1 x foam cylinder
SQUISHY STACK – ROLLERSTM Foam Play Shapes
Scan QR code for video instructions
1 Cut open the packaging CAUTION: Use scissors carefully to avoid cutting the shapes!
1 x foam half-moon
12
m+
1 x foam wavy ramp
2 Foam shapes expands when opened
EXPANDS WHEN OPENED!
3 For the best results, leave the foam shapes to expand for at least 48 hours.
4 Reshaping: If the foam pieces do not achieve the desired shape after more
than 48 hours, use a blow dryer (at a normal termperature) to correct the
shapes. · Keep the blow dryer 2 inches (5cm) from the foam pieces · Reshape
the warmed foam pieces by hand
BT1860
5 Close the zippers and make sure the pull tabs are fully hidden beneath the lining to prevent children from unzipping the foam shapes.
FINAL
8.25 in (21cm) dia
16.5 in (42cm)
24 in (61cm)
WASHING INSTRUCTIONS:
Remove the covers Do NOT wash the foam shapes Machine-wash at max. 30°C/86°F
Do NOT bleach Tumble dry on low Do NOT iron Do NOT dry clean
3
fun foam shapes!
16.5 in (42cm)
OPTIONS FOR WRINKLE REMOVAL:
· Wipe the cover with a damp washcloth and dry it with a blow dryer
· Iron the cover with a steam iron without direct contact (do NOT use a dry
iron)
· For the best results, wash and dry the cover
BT1860
How to replace the covers after washing them: When putting on a cover, pull on it with one hand and push the foam piece with the other. This helps when replacing a cover.
WARNING! Keep away from fire and heat sources to avoid permanent damage to the
product.
Adult Assembly required.
© 2024 MAISON BATTAT INC. Manufactured for Maison Battat Inc. 8440 Darnley
Road, Montreal, P.Q. H4T 1M4 Designed by Maison Battat Inc. Battat® is a
registered
trademark of Maison Battat Inc. Made In China.
All Battat® products meet all US standards. Colors may vary.
Please retain this information for future reference. Please remove all
packaging materials before giving to children.
BT1860