hama 00049597 Speaker Stand Instruction Manual
- June 12, 2024
- Hama
Table of Contents
- Explanation of Warning Symbols and Notes
- Package Contents
- Safety Notes
- Required tools
- Installation kit
- Intended use and specifications
- Installation requirements and installation
- Installation
- Setting and maintenance
- Warranty Disclaimer
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama 00049597 Speaker Stand Instruction Manual
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- 2 speaker stands
- 6 support plates
- 2 brackets
- 2 adhesive hook-and-loop strips for securing the speakers
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
Safety Notes
Warning
- Given the multitude of terminal devices, the supplied mounting kit is unable to cover every option.
- In a few cases, the screws for attaching the terminal device to the product are too long.
- Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
- If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
- Never apply force during mounting. This can damage your terminal device or the product.
- If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make sure that the product is loaded symmetrically.
- Maintain the necessary safety clearance around the attached load (depending on the model).
- In the event of damage to the product, remove the attached load and stop using the product.
Required tools
Installation kit
- **(A1) M5x15 (x2)
**
- **(A2) (x2)
**
- **(B1) M4x16 (x2)
**
- **(B2) M5x12 (x2)
**
- **(B3) M6x12 (x2)
**
- **(C1) M4 (x2)
**
- **(C2) M5 (x2)
**
- **(C3) M6 (x2)
**
- **(D1) M5 (x2)
**
- **(D2) M6 (x2)
**
- **(E1) M6x12 (x2)
**
- **(E2) M6 (x2)
**
Intended use and specifications
- The product is for domestic use
- The product is intended for indoor use only.
- Only use the product for the intended purpose.
- Maximum load bearing capacity: 5 kg
- Overall height: 75.8 – 120 cm
Installation requirements and installation
Note
- Only mount the product with the help of a second person. Get the support and help you need.
- Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
- The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on.
- Observe the other warnings and safety instructions.
- Proceed step-for-step in accordance with the illustrated installation instructions (Fig. A ff.).
Installation
Setting and maintenance
Warning
Always adjust the product with the help of a second person. Get the support
and help you need.
- To adjust the height, undo the connecting piece, set the required height and secure the connecting piece again. (see figure 5)
- Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Service & Support
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>