rule iL200 Marine 200 GH Inline Submersible Pump Instruction Manual
- June 4, 2024
- rule
Table of Contents
rule iL200 Marine 200 GH Inline Submersible Pump
USA
100 Cummings Center, Ste. 535-N, Beverly, MA 01915
Tel: +1 978 281 0440 Fax: +1 978 283 2619
UK
Bingley Road, Hoddesdon, Hertfordshire, EN11 0BU
Tel: +44 (0) 1992 450145 Fax: +44 (0) 1992 467132
ITALY
Via Tommaseo, 6, 20059, Vimercate, Milano
Tel: +39 039 685 2323 Fax: +39 039 666 307
CHINA
30/F Tower A, 100 Zunyi, Road Shanghai, China 200051
Tel: +86 21 2208 2888 Fax: +86 21 2208 2999
GERMANY
Oststraße 28, 22844 Norderstedt
Tel: +49 40 53 53 73 0 Fax: +49 40 53 53 73 11
Submersible Inline Pumps
Features
- Pumps fresh and sea water.
- Rapid diesel refueling and transfer with no spillage (models iL500Plus, iL280Plus, iL200Plus and iL120Plus only).
- Bilge pump-out in tight areas.
- Water transfer; deck showers; deck,anchor & general wash-down.
- Robust, slim line with clip-on easily cleaned filter.
Instructions
Fit a length of appropriate size hose (see specification table for details) to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (—) negative to (—) negative (if powering from a car or boat battery do not use with engine running). The pump will deliver immediately.
For an in-line installation unclip the filter to expose the inlet nozzle. Connect a length of hose between the tank and nozzle. The pump must be fitted below the tank.
- Avoid dry running for long periods.
- For drinking water applications sterilize regularly.
- Store away from excessive heat and direct sunlight to avoid external damage.
- If the pump fails to perform, check for blockages (including filter), leaks and correct hose & electrical connections.
WARNING: DO NOT use any Rule pump for petrol, petroleum products or any products with a flash point below 37°C (98°F).
Specifications
Model| iL500 Plus| iL280 Plus| iL200 Plus|
iL120 Plus| iL200
---|---|---|---|---|---
Part No.| iL500P iL500P-24| iL280P iL280P-24| iL200P iL200P-24| iL120P| iL200
Pump Type| Centrifugal, submersible, in-line pump
Current| 12V (6 amp)
24V (3 amp)
| 12V (4.5 amp)
24V (2.5 amp)
| 12V (4.5 amp)
24V (2.5 amp)
| 12V (1 amp)| 12V (2.8 amp)
Head| 32 ft (9.7m)| 32 ft (9.7m)| 32 ft (9.7m)| 9 ft (2.7m)| 25 ft (7.6m)
Flow rate| 500 GPH
(1920 LPH)
| 280 GPH
(1080 LPH)
| 200 GPH
(760 LPH)
| 120 GPH
(454 LPH)
| 200 GPH
(760 LPH)
Rating| Continuous| Continuous| Continuous*| Continuous| Intermittent^
Outlets (ID hose)| 3/4″ (19mm)| 1/2″ (13mm)| 1/2″ (13mm)| 1/2″ (13mm)| 3/8″
(10mm)
1/2″ (13mm)
Pressure| 14 PSI
(0.96 bar)
| 14 PSI
(0.96 bar)
| 11 PSI
(0.76 bar)
| 9 PSI
(0.62 bar)
| 14 PSI
(0.96 bar)
Body| POM| POM| POM| POM| HIP
Length| 6.5″ (165mm)| 6.5″ (165mm)| 6.5″ (165mm)| 6.5″ (165mm)| 5.1″ (130mm)
Diameter| 1.5″ (38mm)| 1.5″ (38mm)| 1.5″ (38mm)| 1.5″ (38mm)| 1.4″ (36mm)
Cable Length| 13 ft (4m)| 13 ft (4m)| 3 ft (1m)| 3 ft (1m)| 3 ft (1m)
Weight| 1.1 lbs (500g)| 1.1 lbs (500g)| 0.5 lbs (227g)| 1.1 lbs (500g)| 0.25
lbs (113g)
Liquid| Fresh & Sea Water / Diesel| Fresh & Sea Water
Operating Temp.| Water to 176°F (80°C)
Diesel to 104°F (40°C)
| Water to 140°F (60°C)
Continuous Duty — Should not be run dry for long periods of time.
Intermittent Duty — Should not be run for more than 20 mins. and rested for
equal time.
XYLEM’S LIMITED WARRANTY WARRANTS THIS PRODUCT TO BE FREE OF DEFECTS AND WORKMANSHIP FOR A PERIOD OF 3 YEARS. THE WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, GUARANTEES, CONDITIONS OR TERMS OF WHATEVER NATURE RELATING TO THE GOODS PROVIDED HEREUNDER, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED AND EXCLUDED. EXCEPT AS OTHERWISE PROVIDED BY LAW, BUYER’S EXCLUSIVE REMEDY AND SELLER’S AGGREGATE LIABILITY FOR BREACH OF ANY OF THE FOREGOING WARRANTIES ARE LIMITED TO REPAIRING OR REPLACING THE PRODUCT AND SHALL IN ALL CASES BE LIMITED TO THE AMOUNT PAID BY THE BUYER HEREUNDER. IN NO EVENT IS SELLER LIABLE FOR ANY OTHER FORM OF DAMAGES, WHETHER DIRECT, INDIRECT, LIQUIDATED, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY OR SPECIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFIT, LOSS OF ANTICIPATED SAVINGS OR REVENUE, LOSS OF INCOME, LOSS OF BUSINESS, LOSS OF PRODUCTION, LOSS OF OPPORTUNITY OR LOSS OF REPUTATION. THIS WARRANTY IS ONLY A REPRESENTATION OF THE COMPLETE LIMITED WARRANTY. FOR A DETAILED EXPLANATION, PLEASE VISIT US AT www.xylemflowcontrol.com/support/, CALL OUR OFFICE NUMBER LISTED, OR WRITE A LETTER TO YOUR REGIONAL OFFICE.