NITECORE MT1C-Pro Lumen Rechargeable EDC Flashlight User Manual
- September 21, 2024
- Nitecore
Table of Contents
NITECORE MT1C-Pro Lumen Rechargeable EDC Flashlight
IMPORTANT
- Thanks for purchasing NITECORE!
- Please read this manual carefully before using the product and follow the instructions.
- This manual contains important safety information and operating instructions.
- Please keep it for future reference. In case of updates, please refer to the latest version available on the official website.
Warning
- This product is intended for use by adults aged 18 and over. Please keep this product out of the reach of children.
- CAUTION! Possible dangerous radiation! DO NOT stare directly into the light beam or shine the light directly into the eyes of anyone!
- The product will generate massive heat during prolonged operation. Please exercise caution during use. It is recommended not to use high brightness levels for extended periods to prevent burns and product damage.
- DO NOT cover or place objects near the head of the product, as this may cause damage to the product or accidents due to high temperatures.
- DO NOT use the product to illuminate flammable or explosive materials, as the high heat may lead to combustion or explosion.
- Please use the product in a standard handheld manner to avoid accidents in the event of product failure.
- DO NOT submerge the product into any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference of air pressure inside and outside of the tube.
- When the product is placed in an enclosed or flammable environment such as a pocket or backpack, or when it is left unused for an extended period, please loosen the head to avoid accidental activation and dangers caused by excessive heat. Alternatively, remove the battery to prevent damage from battery leakage.
- DO NOT expose the product to temperatures above 60°C (140°F) for prolonged time, as this poses a risk of battery explosion or combustion.
- Please recharge the product with the original charging cable to avoid shortening the lifespan of the battery.
- Please recharge the product every 6 months when left unused for a prolonged time.
- DO NOT disassemble or modify this product as doing so will cause damage to it and render the product warranty invalid. Please refer to the warranty section in the manual for complete warranty information.
Battery Safety
Improper use of the battery may result in severe battery damage or safety
hazards such as combustion or explosion. DO NOT use the battery if its wrapper
is damaged or if its discharge current does not match your product. DO NOT
disassemble, puncture, cut, crush, incinerate, or short-circuit the battery.
DO NOT mix the batteries of different brands or types. If any leakage,
abnormal odor, or deformation is noticed, stop using the battery immediately
and dispose of it properly. Dispose of the device/batteries by applicable
local laws and regulations.
Features
- Utilizes a UHi 20 LED with a max output of 1,000 lumens
- Max peak beam intensity of 32,500cd and max throw of 360 meters
- An optical system combined with crystal coating and “Precision Digital Optics Technology” (PDOT)
- A single tail switch controls 2 brightness levels
- Powered by a 18350 high-capacity Li-ion battery while compatible with CR123 / RCR123 batteries
- Includes a NITECORE 18350 rechargeable Li-ion battery (NL1816R 1,600mAh) with a built-in USB-C charging port, offering a runtime of up to 16 hours
- A highly efficient constant current circuit provides a stable output
- Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
- Electronic reverse polarity protection
- Optical lenses with double-sided scratch-resistant coating
- Constructed from aero-grade aluminum alloy
- HA III military-grade hard-anodized finish
- Tail stand capability
- Stainless steel clip included
- Waterproof and dustproof rating by IP68 (2 meters submersible)
- Impact resistant to 2 meters
Specifications
- Length : 88.0mm (3.46″)
- Head Diameter : 26.8mm (1.06″)
- Tube Diameter : 21.4mm (0.84″)
- Tail Diameter : 24.4mm (0.96″)
- Weight: 53g (1.87 oz) (Battery Not Included)
Accessories
NITECORE 18350 Rechargeable Li-ion Battery (NL1816R 1,600mAh), USB-C Charging Cable, Lanyard, Spare O-ring
Battery Options
Note: DO NOT use flat-top batteries.
Technical Data
Using the NITECORE NL1816R Li-ion Battery
Note: The stated data is measured by the international flashlight testing standards ANSI/PLATO FL 1-2019, using a 1 x 18350 Li-ion battery (1,600mAh) under laboratory conditions. The data may vary in real-world use due to different battery usage or environmental conditions.
Using 1 x RCR123 Battery
Note: The stated data is measured by the international flashlight testing standards ANSI/PLATO FL 1-2019, using 1 x RCR123 battery (950mAh) under laboratory conditions. The data may vary in real-world use due to different battery usage or environmental conditions.
Using 1 x CR123 Battery
Note: The stated data is measured by the international flashlight testing standards ANSI/PLATO FL 1-2019, using 1 x CR123 battery (1,600mAh) under laboratory conditions. The data may vary in real-world use due to different battery usage or environmental conditions.
Battery Installation / Removal
MT1C Pro
Charging the Battery
The included NL1816R rechargeable Li-ion battery is equipped with a USB-C
charging port. Please charge the battery before use.
- Power Connection: Use the USB cable to connect an external power supply (e.g. a USB adapter or other USB charging devices) to the charging port to begin the charging process. The charging time is approx. 2h 15min. (Charged via the 5V/1A adapter)
- Charging Indication: During the charging process, the red charging indicator will turn on steadily. When the battery is fully charged, the charging indicator will turn green steadily.
Battery Installation / Removal
As illustrated, after unscrewing the tube, insert/remove the battery and screw
to tighten the tube.
Warnings
- Make sure the battery is inserted with the negative end facing towards the tail. The product will not work if the battery is incorrectly inserted.
- When the power level is low, please stop using the product and recharge the battery to prevent damage.
Tactical Momentary Illumination
- For HIGH (Default): When the light is off, half press and hold the Power Button to momentarily access HIGH. Release to turn it off.
- For LOW: Turn off HIGH, then half press and hold the Power Button again within 2 seconds to momentarily access LOW. Release to turn it off.
Note: If the light remains off for more than 2 seconds, half-pressing and holding the Power Button again will automatically revert to HIGH.
On / Off
On
- For HIGH (Default): When the light is off, fully press the Power Button until a click sound is heard to access HIGH.0
- For LOW: Turn off HIGH, then full press the Power Button again within 2 seconds to access LOW.
- Off: When the light is on, full press the Power Button until a click sound is heard to turn it off.
- Note: If the light remains off for more than 2 seconds, full pressing the Power Button again will automatically revert to HIGH.
Battery Charging / Replacement
The battery should be charged or replaced when the output appears to be dim or
the flashlight becomes unresponsive due to low power.
ATR (Advanced Temperature Regulation)
The integrated ATR technology regulates the output of the MT1C Pro according
to the working condition and ambient environment to maintain the optimal
performance.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if
- the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
- the product(s) is/are damaged due to improper use. (e.g. reversed polarity installation)
- the product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com
- All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
Thanks for purchasing NITECORE!
SYSMAX Innovations Co., Ltd.
- TEL: +86-20-83862000
- FAX: +86-20-83882723
- E-mail: info@nitecore.com
- Web: www.nitecore.com
- Address： Unit 6355, 5/F, No.1021 Gaopu Road, Tianhe District, Guangzhou, 510653 Guangdong, China
Please find us on Facebook NITECORE Flashlight
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>