FIAMMA 98655-741 F45S Awning Mounting Bracket Instruction Manual
- September 21, 2024
- FIAMMA
Table of Contents
FIAMMA 98655-741 F45S Awning Mounting Bracket
Specifications
- Compatible Vehicles: Ford Transit High Roof, VW Crafter, Mercedes Sprinter
- Package Contents:
- X2 Brackets
- X16 5.5×25 AUTOF Screws
- X4 M5 DIN 982 Screws
- X4 M5x14 UNI 7687 Screws
FAQs
- Q: Can these brackets be used on other vehicle models?
- A: These brackets are specifically designed for Ford Transit High Roof, VW Crafter, and Mercedes Sprinter models. Using them on other vehicles may not be compatible.
- Q: How often should I check the brackets for maintenance?
- A: It is recommended to check the brackets periodically, especially after the initial use and then regularly during ongoing usage to ensure safety and stability.
- Q: What should I do if the brackets have shifted?
- A: If you notice that the brackets have shifted, reposition them correctly and ensure they are securely fastened to maintain proper functionality.
Package contents
Installation instructions
Installation of the brackets on the vehicle
IMPORTANT WICHTIG CUIDADO IMPORTANTE
Fit the brackets on the already fixing points on the vehicle and be sure they are in line with the sign “SUPPORT” of the awning and consequently of the arm fixing points on the case box.
Installation of the awning on the brackets
ATTENTION Periodically check the brackets to make sure they are firmly attached (especially after the first kilometers) make sure the bolts are not loose and that the holding brackets have not shifted. When using the awning please follow the instructions of the product. All rights reserved. Fiamma S.p.A. reserves the right to modify at any time, without notice, prices, materials, specifications, and models or to cease production of any model.
CONTACT INFORMATION
- Fiamma SpA – Italy
- Via San Rocco, 56
- 21010 Cardano al Campo (VA)
- 98655-741
- R0\IS\98690-003 rev. F
- Fiammastore 01/2014