HUGHES HL1120W Terminal Approved for Look User Guide
- September 23, 2024
- Hughes
Table of Contents
HL1120W Terminal Approved for Look
“`html
Specifications:
- Model: OneWeb HL1120W user terminal
- Manufacturer: Hughes Network Systems, LLC
- Antenna Safety Distance: Minimum 3 feet
- Waterproof: IDU is not waterproof or water-resistant
- Power Requirements: Follow country-specific standards
- Trademark Information: HUGHES, Hughesnet, Hughesnet Fusion,
HughesON, IPoS, SPACEWAY, JUPITER
Product Usage Instructions:
Safety Instructions:
Ensure antennas are mounted to minimize human contact. Maintain
a minimum 3-foot distance from the antenna during operation to
adhere to FCC guidelines. Unplug the satellite modem before
servicing. Avoid placing body parts or objects between the radio
and the reflector.
Electrical Safety:
ODU, IDU, and cables are electrical conductors. Protect against
transients and electrostatic discharges. Unplug AC power before DC
power. Handle ODU carefully to prevent damage to connectors and
coating. Use foam insert for protection during handling.
Power Standards:
Observe power standards of the installation country. Always
unplug AC power before disconnecting DC input to prevent electrical
shock or damage.
FAQ:
Q: Is the IDU waterproof?
A: No, the IDU is not waterproof or water-resistant. Contact
with water can cause shock injuries and permanent damage.
Q: What should I do before servicing the satellite modem?
A: Before servicing, always unplug the satellite modem to ensure
safety.
Q: How should I handle the ODU during installation?
A: Handle the ODU with care to avoid damage to connectors and
coating. Use the foam insert from packaging to protect the top
surface of the ODU.
“`
Safety Instructions
Mount antennas in such a manner as to minimize the potential for human contact
during normal operation. To avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna shall not be less
than 3 feet during normal operation. Before servicing or upgrading, unplug the
satellite modem. Do not place any body parts or objects between the radio and
the reflector at any time during operation.
The ODU, IDU, and cables are electrical conductors. Transients or
electrostatic discharges that may occur at the antenna (such as a lightning
strike during thunderstorms) may damage your electronic equipment and cause
personal injury or death to persons touching the exposed metal connectors of
the equipment if not installed properly.
The IDU is not waterproof or water resistant. Contact with water can cause
shock injuries and can permanently damage these units.
If there is any reason to remove power from the IDU, always unplug the AC
power cord from the power source (power outlet, power strip, or surge
protector) before unplugging the DC input. Do not remove the DC power cord
from the IDU’s rear panel while AC power is going to the power supply. Doing
so could result in an electrical shock or damage the modem.
· Always use the power supply provided with in the IDU kit. UT performance may
suffer if the wrong power supply is used.
· Connect the AC/DC power supply to an alternating current (VAC) threewired
grounded outlet. A suitable surge protector is recommended to protect the IDU
from possible damage due to power surges.
· Always connect the DC power cord to the HL1120W-IDU rear panel before
applying power to the power supply. If you apply power to the power supply and
then connect the DC power cord, the IDU may not perform properly and could be
damaged.
Observe the power standards and requirements of the country where it is
installed.
The ODU should be handled with care to avoid damage to the radiating surface,
connectors, and mounting elements. Special care should be taken to protect the
hydrophobic coating on the top surface of the ODU. Avoid handling/touching the
top surface and protect it from scratching, especially during pre-installation
when the unit may be upside down.
If needed, use the foam insert from the packaging to keep anything from
touching the top surface of the ODU.
Copyright © 2023-2024 Hughes Network Systems, LLC
All rights reserved. This publication and its contents are proprietary to
Hughes Network Systems, LLC. No part of this publication may be reproduced in
any form or by any means without the written permission of Hughes Network
Systems, LLC, 11717 Exploration Lane, Germantown, Maryland 20876.
Hughes Network Systems, LLC has made every effort to ensure the correctness
and completeness of the material in this document. Hughes Network Systems, LLC
shall not be liable for errors contained herein. The information in this
document is subject to change without notice. Hughes Network Systems, LLC
makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a
particular purpose.
Trademarks: HUGHES, Hughesnet, and Hughesnet Fusion are registered trademarks,
and HughesON, IPoS, SPACEWAY, and JUPITER are trademarks of Hughes Network
Systems, LLC. All other trademarks are the property of their respective
owners.
1043829-0001 Rev C
JUNE 6, 2024
This guide covers how to assemble, install, and commission the OneWeb HL1120W
user terminal (UT). For detailed information related to the steps in this
guide, refer to OneWeb HL1120W UT Installation Guide (1043630-0001). Follow
the steps in this guide in the order in which they appear.
What’s in the Box?
Equipment needed for your Hughes Managed LEO service:
Outdoor Unit (ODU)
Antenna Mounting Kit:
1. Blind mate guide 2. Tray 3. Rubber mat 4. Stanchion 5. Non-penetrating
mount (NPM) 6. Bolts/screws/washers
Indoor Unit (IDU) Kit:
1. HL1120W IDU 2. Power supply unit (PSU) 3. Power cable 4. Coax connectors
Unpack and inspect all the components to ensure they are all present and in good condition.
1
The ODU should be handled with care to avoid damage to the radiating surface, connectors, and mounting elements. Special care should be taken to protect the hydrophobic coating on the top surface of the ODU. Avoid handling/touching the top surface and
protect it from scratching, especially during pre-installation when the unit may be upside down. If needed, use the foam insert from
the packaging to keep anything from touching the top surface of the ODU.
Fasten the blind mate guide to the back of the ODU’s full
2
duplex (FDX) bridge using the hardware from the antenna mounting kit.
Assemble the stanchion onto the antenna mount with the
3
supplied hardware. Affix the hazard label to the stanchion, as shown.
NOTE: Place ballast blocks of at least 50 lb (or 23 kg) onto either side of tray. This increases stability.
Seat the antenna’s blind mate guide within the mount’s
4
stanchion and secure with supplied hardware. The body of the antenna must extend over the NPM tray.
Thread one end of each IFL cable onto the appropriate
antenna type F connector. IFL cable runs routed to the
5
antenna’s IFL-A connector use red connectors. IFL cable runs routed to the antenna’s IFL-B connector use blue
connectors.
1043829-0001 Rev C
JUNE 6, 2024
Ground the user terminal via the IFL cable using the
provided ground block. For grounding requirements, see
6
OneWeb HL1120W UT Installation Guide (1043630-
0001).
Connect the IFL cables to the appropriate F connector on the rear panel of the
HL1120W IDU, as shown.
7 TIP: Use the type F torque wrench to ensure sufficient tightness and
connection reliability.
Connect the DC power cord to the IDU’s DC IN connectors
8
and apply power by connecting the AC power cord to the surge protector, as shown below.
NOTICE: Review the safety instructions in this guide.
Establish a connection to the IDU. Use your smart device
9
to connect to the HL1120W IDU built-in Wi-Fi router. The Wi-Fi SSID and password can be found on the rear label of
the HL1120W IDU.
10
Download the Hughes LEO app (on the App Store for iOS devices or Google Play Store for Android devices) to commission the UT.
NOTE: Alternatively, you can commission the UT in the local user interface (LUI) by accessing http://192.168.100.1 in your browser.
This completes the installation of the HL1120W user terminal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>