Pioneer AVIC-Z910DAB Series Monitor 7 Inch Navigazione Instruction Manual
- September 21, 2024
- Pioneer
Table of Contents
AVIC-Z910DAB Series Monitor 7 Inch Navigazione
“`html
Product Specifications:
-
Models: AVIC-Z910DAB, AVIC-Z810DAB, AVIC-Z710DAB,
AVIC-Z610BT -
Firmware Version: 1.06 or higher
-
File Format: ZIP
-
Storage Requirement: SD card or USB storage device
-
Storage Format: FAT32
Product Usage Instructions:
A. Displaying the Firmware Version:
-
Press the HOME button to display the Top menu screen.
-
Touch the following keys in the following order to access
System Information and Firmware Information. -
Check the firmware version number. If it is 1.06 or higher, no
update is necessary.
B. Updating the Firmware on Your Unit:
IMPORTANT:
-
Ensure model number is AVIC-Z910DAB, AVIC-Z810DAB,
AVIC-Z710DAB, or AVIC-Z610BT. -
Disconnect all connected mobile devices.
-
Place the update file in the root folder of your SD card or USB
storage device. -
Do not turn off the system’s power or touch the touch panel
screen during update. -
Do not remove the SD card or USB storage device during
update. -
Settings will be restored to default values after the
update.
Procedure:
-
Copy the correct update folder (AVIC18) onto a blank SD card or
USB storage device formatted in FAT32. -
Insert the SD card into the slot or connect the USB storage
device to the port. -
Set audio source to OFF on your unit.
-
Navigate to System Information and select Firmware Update.
-
Follow on-screen instructions to complete the update
process.
Frequently Asked Questions (FAQ):
Q: What should I do if my firmware version is already 1.06 or
higher?
A: If your firmware version is already 1.06 or higher, there is
no need to update the firmware as it is up to date.
Q: Can I interrupt the firmware update process?
A: It is crucial not to interrupt the firmware update process as
it may result in severe damage to your unit. Wait for the update to
complete fully.
“`
System Firmware Update Instructions for
AVIC-Z910DAB, AVIC-Z810DAB, AVIC-Z710DAB and AVIC-Z610BT
REMARKS: If you have any difficulty carrying out these instructions, please
contact Pioneer Customer Support. Once upgraded to this version, it is not
possible to downgrade to a lower version. Do NOT install this firmware to a
Camper Van model. You can check if you have a C (Camper) Model by checking
the Firmware version; C versions have Firmware version “8.01xxxx” or higher,
check the below instructions how to display the version. Please download and
print these instructions before downloading and installing the firmware
update. It is important that you complete all steps correctly and in the order
described below. Never turn your unit off, eject the SD memory card or
disconnect the USB storage device while the firmware is being updated. You can
only update the firmware when the vehicle is stopped and the parking brake is
engaged. In order to perform this update, the following items are needed:
Pioneer AVIC-Zx10BT_DAB (full model names listed above) A USB storage device
or SD card, storage device requirements: – 2 GB or larger in capacity,
formatted to FAT32 – Should be blank (should not contain any files)
IMPORTANT (For navigation system users)
If you install this Firmware, all navigation function settings and save data
will be formatted.
Once the update has finished, you will need to reconfigure the settings.
Any content purchased and added through Naviextras will also need to be re-
installed. Note
that no charges will be incurred to download previously purchased content.
A. Displaying the firmware version Check whether the firmware of your unit
needs to be updated by checking the version number of the firmware.
1. Press the HOME button to display the Top menu screen. 2. Touch the
following keys in the following order.
The “System” screen appears
3. Scroll down the list.
4. Touch [System Information].
5. Touch [Firmware Information].
6. After the “Firmware Information” screen appears, check the firmware
version number. 7. If the firmware version is 1.06 or higher, it is not
necessary to update the firmware. If the
version number is lower than 1.06, it is necessary to update the firmware.
Please continue to Step B. If the firmware version starts with 8 you have a
Camper Van model and you should download a different firmware update file. B.
Downloading the Firmware Update Files from Pioneer’s website NOTE: If you have
any difficulty performing these instructions, please contact Pioneer Customer
Support. Once upgraded to this version, it is not possible to downgrade to a
lower version. 1. Download the correct file from the website to a folder on
your computer.
European model: AVIC-Zx10BT_DAB_EU5_FW_VER106.ZIP 2. Double click the ZIP file
named to open it. 3. Extract and save the folder ” AVIC18″ to a folder on your
computer.
C. Updating the firmware on your Unit
IMPORTANT
DO NOT perform any further steps of this firmware update if the model number
is anything other than AVIC-Z910DAB, AVIC-Z810DAB, AVIC-Z710DAB or AVIC-Z610BT
Disconnect any mobile devices that are currently connected to your unit.
Ensure that the update file is located within the root (top) folder of your SD
card or USB
storage device. There should be no other files on the SD card or USB storage
device. While your unit is being updated, DO NOT turn off the system’s power
and DO NOT touch
the unit’s touch panel screen as this may result in severe damage to your
unit. DO NOT remove the SD memory card or USB storage device during the
firmware update. Performing the firmware update will restore all settings to
their default values.
Procedure:
1. Connect a blank (formatted in FAT32) SD card or USB storage device to your
computer, and then locate the correct update folder (AVIC18) and copy it onto
the SD card or USB storage device
2. Insert the SD card into the SD card slot or connect the USB storage device
to the USB port
3. Set the audio source to “OFF” on your unit. 4. Press the HOME button to
display the Top menu screen. 5. Touch the keys below in the following order.
The “System” screen appears. 6. Scroll down the list and select [System
Information].
Note that the images are for illustration purposes only; the actual images may
differ.
7. Select [Firmware Update]. The “Firmware Update” screen appears. Touch
[Continue] to display the data transfer mode.
Wait for the file check (approx. 2 minutes).
8. Select [Start]. The Progress status is shown.
9. Wait until the update process is complete. DO NOT pull out the SD card,
USB storage device or remove power until you see the “Update Complete” screen.
Once the firmware update process is complete, the unit will display the
“Update Complete” screen.
10.Press the HOME button. 11.Remove the SD card or USB storage device. 12.The
firmware update is complete. Check the firmware version as described in
paragraph A “Displaying the firmware version” to confirm that the update was
successful.
Firmware Update FAQ Q: What if my set does not switch on automatically after
updating the software or starts up more than once? A: Turn off the ignition
key and turn on again the set should start up now.
Q: What if I cannot upgrade my set / the set does not show the start up screen
after more than 1 attempt? A: Please contact your local Pioneer service
organisation for a product check-up.
Contact Information
Pioneer Customer Support Center http://www.pioneer.eu
———————————————————–Copyright(c) 2024 Pioneer Corporation