Otter BOX OB3145 Kids Grip Case for iPad User Guide
- June 6, 2024
- Otter BOX
Table of Contents
Otter BOX OB3145 Kids Grip Case for iPad User Guide
INSTALL EASYGRAB CASE
-
Peel away and remove silicone slipcover
-
Separate case top from case bottom by locating indicated arrows and releasing each snap along all sides
-
Place device into case bottom
-
Fit case top onto case bottom and snap together along all sides
-
Wrap silicone slipcover onto case, fit around handle and press into place
INSTALL EASYGRAB MULTI-USE CASE STAND
-
Slide stand onto case handle (audible click). Carry using stand handle
-
Carry using stand handle
-
Bend stand to desired hands-free angle
ATTACH CASE STAND TO HEADREST*
-
Take tablet with case stand bent to 90°
-
Bend and hold stand ends toward center to 90°
-
Insert stand between headrest posts
-
Wrap and secure each end around posts
-
Adjust stand to viewing angle
-
Case stand may curve between posts *Attach to back of seat, facing rear only. Ensure each case stand end is wrapped securely around each headrest post. Since headrest sizes vary, the stand center may curve and bow between the posts, which is normal.
©2021 Otter Products, LLC. All rights reserved. The OtterBox name and OtterBox trademarks are the property of Otter Products, LLC, registered in the U.S. and other countries. All other trademarks are the property of their respective owners
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>