tp-link VIGI NVR10 Series Network Video Recorder Instructions

tp-link VIGI NVR10 Series Network Video Recorder

Product Name: Network Video Recorder
Model Number: VIGI NVR1008H / VIGI NVR1016H / VIGI NVR2016H / VIGI NVR1004H-4P / VIGI NVR1104H-4P / VIGI NVR1004H-4P-2TB

(for VIGI NVR2016H)

T535131-2-DT (for VIGI NVR1004H-4P / VIGI NVR1104H-4P/ VIGI NVR1004H-4P-2TB)

Responsible party:
TP-Link Systems Inc.
Address : 10 Mauchly, Irvine, CA 92618
Website : https://www.tp-link.com/us/
Tel : +1 626 333 0234
Fax : +1 909 527 6804
E‑mail : sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Product Name: Power Adapter
Model Number : T120150-2B1 / T120330-2B4 / T535131-2-DT
Responsible party:
TP-Link Systems Inc.
Address : 10 Mauchly, Irvine, CA 92618
Website : https://www.tp-link.com/us/
Tel : +1 626 333 0234
Fax : +1 909 527 6804
E-mail : sales.usa@tp-link.com

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Product Name: Network Video Recorder
Model Number: VIGI NVR1008H-8MP / VIGI NVR1008H-8P / VIGI NVR2016H-16MP / VIGI NVR2016H-16P / VIGI NVR4032H / VIGI NVR4064H /VIGI NVR2016H-16MP-4TB / VIGI NVR2008H-8MP-2TB

Responsible party:
TP-Link Systems Inc.
Address : 10 Mauchly, Irvine, CA 92618
Website : https://www.tp-link.com/us/
Tel : +1 626 333 0234
Fax : +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Model Number: T535243-2-DT / T535131-2-DT / T535337-2-DT
Responsible party:

TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B) (for VIGI NVR1008H / VIGI NVR1016H / VIGI NVR2016H)
CAN ICES-3 (A)/NMB-3(A) (for VIGI NVR1004H-4P / VIGI NVR1104H-4P / VIGI NVR1008H-8MP / VIGI NVR1008H-8P / VIGI NVR2016H-16MP / VIGI NVR2016H-16P / VIGI NVR4016H / VIGI NVR4032H /VIGI NVR4064H / VIGI NVR1004H-4P-2TB / VIGI NVR2016H-16MP-4TB / VIGI NVR2008H-8MP / VIGI NVR2008H-8MP-2TB)

CE Mark Warning
For VIGI NVR1004H / VIGI NVR1008H / VIGI NVR1016H / VIGI NVR2016H:
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp- link.com/support/ce. For VIGI NVR1004H-4P / VIGI NVR1104H-4P / VIGI NVR1008H- 8MP / VIGI NVR1008H-8P / VIGI NVR2016H-16MP / VIGI NVR2016H-16P / VIGI NVR4016H / VIGI NVR4032H / VIGI NVR4064H / VIGI NVR1004H-4P-2TB / VIGI NVR2008H-8MP-2TB / VIGI NVR2016H-16MP-4TB:

This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/support/ce

UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp- link.com/support/ukca/

Safety Information

• Working Temperature: -10 – 55 °C
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Place the device with its bottom surface downward. Install it at stable places, and prevent it from falling.
• The NVR needs to cooperate with cameras and hard disks to realize continuous recording and storage of recordings. Therefore, network standby mode and standby mode are not applicable to the NVR. (For Class B NVR devices)
• The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.
• Adapter should be used indoors where the ambient temperature is lower than or equal to 40℃.

CAUTION!
Risk of explosion if the battery is replaced by an incorrect type

CAUTION!

• Avoid replacement of a battery with an incorrect type that can defeat a safeguard.
• Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

CAUTION: Do not ingest battery, Chemical Burn Hazard”

• This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

References

• CE | TP-Link
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>