SKAR AUDIO SK-BATT80AH AGM High Performance Battery User Manual

SK-BATT80AH AGM High Performance Battery

Specifications:

• Model: SK-BATT80AH
• Type: AGM High Performance Battery
• Maximum Voltage for Charging: 14.4v
• Maximum Terminal Tightening Torque: 8 ft-lbs

Product Information:

We take immense pride in the quality and reliability of our
products. Skar Audio AGM High Performance Batteries are built to
withstand even the most demanding conditions, ensuring that they
will stand the test of time. Say goodbye to the inconvenience and
frustration of battery failures, and welcome the peace of mind that
comes with our exceptional batteries.

Product Usage Instructions:

1. Charge Battery Before Initial Use:

Before installing and wiring up your new Skar Audio AGM High
Performance Battery, ensure that the battery is fully charged using
an AGM specific charger that does not exceed 14.4v when charging.
Once charged, proceed with installation.

2. Do Not Over-Tighten Battery Terminals:

When connecting terminals, do not exceed 8 ft-lbs max torque to
avoid stripping out the bolt holes. Use the included adapters,
bolts, or screws provided.

3. Installation Instructions:

– Clear designated battery location of debris
– Securely mount the battery to prevent tipping over
– Connect battery leads to correct terminals (+ to +, – to -)
– Ensure proper grounding if used as a secondary battery

4. Charging Instructions:

Always use an AGM specific charger with automatic shutoff to
prevent over or under-charging. Charge before initial use and do
not exceed 2.4 volts per cell to avoid gas formation.

FAQ:

Q: Can I use a regular charger for this battery?

A: No, always use an AGM specific charger to prevent damage to
the battery.

Q: How do I connect batteries in a dual setup?

A: Connect them in parallel (+ to +, – to -) to double amperage
output or in series (+ to -, – to +) to double voltage output.

SK-BATT80AH USER MANUAL

CAUTION
PLEASE READ BEFORE INSTALLING

INTRODUCTION
We take immense pride in the quality and reliability of our products. Skar Audio AGM High Performance Batteries are built to withstand even the most demanding conditions, ensuring that they will stand the test of time. Say goodbye to the inconvenience and frustration of battery failures, and welcome the peace of mind that comes with our exceptional batteries.
CHARGE BATTERY BEFORE INITIAL USE
Before installing and wiring up your new Skar Audio AGM High Performance Battery, you will want to ensure that the battery is fully charged. To do so you will need to connect your new Skar Audio AGM High Performance Battery to an AGM specific charger that does not exceed 14.4v when charging. Once your AGM specific charger has completed the charging cycle, you can now install your new Skar Audio AGM High Performance Battery.
DO NOT OVER-TIGHTEN BATTERY TERMINALS
Whether you are using the included automotive post adapters, bolts, or screws, do not exceed 8 ft-lbs max when tightening. Over tightening can strip out the bolt holes and render your battery useless.
INSTALLATION INSTRUCTIONS
Make sure that the designated battery location is clear of any debris or obstructions, as the presence of such materials could potentially result in sparking if the battery comes into contact with them.
Once you have successfully placed your new battery in its installation location, securely mount the battery to ensure it cannot fall over. Skar Audio High Performance Batteries are designed to be universal and will fit in most automotive, truck, and marine applications.
Connect the battery leads to the correct terminals, (+) Positive lead to (+) Positive terminal / (-) Negative lead to (-) Negative terminal. Reminder: Do not tighten the terminal bolts, screws, or automotive post adapters more than 8 ft-lbs when connecting battery leads.
If you are running a dual battery setup, ensure that the batteries are wired together in parallel which is (+) Positive to (+) Positive and (-) Negative to (-) Negative. Parallel will double the amperage output and reserve capacities. If you wire your batteries in series which is (+) Positive to (-) Negative you will double the voltage output of your Skar Audio AGM High Performance Batteries.
If this battery is being used as a secondary battery, please ensure it is properly grounded to the chassis (no plastic or painted metal, must be bare metal) and proper fusing has been achieved.
Skar Audio, Inc. | WWW.SKARAUDIO.COM

SK-BATT80AH USER MANUAL

CAUTION
PLEASE READ BEFORE INSTALLING

CHARGING INSTRUCTIONS
When charging your Skar Audio AGM High Performance Battery you will always want to use an AGM specific charger that features an automatic shutoff to prevent over-charging or under-charging which could cause permanent damage to your battery.
Charge your Skar Audio AGM High Performance Battery before initial use. This will ensure the battery will operate correctly once installed in your vehicle.
Never allow your battery to charge above 2.4 volts per cell as this will cause the battery to “gas” and once the oxygen from the battery has vented, it cannot be restored.
LONG TERM VEHICLE STORAGE

SK-BATT80AH SPECIFICATIONS
Nominal Capacity 80Ah Nominal Voltage 12 Volts Cold Cranking Amps (CCA) 1012 Amps Reserve Capacity @ 25 Amps 140 Minutes Max Continuous Discharge Current 1170 Amps
20 Hour Rate 3.9A / 81.2Ah 5 Hour Rate 14A / 71.1Ah 1 Hour Rate 42.9A / 43.9Ah °/ Hour Rate 78A / 39.8Ah Typical Cycle Life: 300 Cycles @ 100% Discharge Depth (Down to 10.5 Volts)

If your vehicle will be going into long term storage you will want to follow the instructions below to prevent long term damage to your Skar Audio AGM High Performance Battery.
Disconnect the battery from the main battery leads as well as any devices that will draw power.
Do not leave a trickle charger on the battery as this will overcharge the battery.
Use a battery tender device to ensure the battery stays at peak voltage while in storage.
Test the voltage of your battery after it has been in storage. If it is below 12.6 Volts, you will need to charge the battery back to full with your AGM specific charger before using it in your vehicle again.
WARNINGS & SAFETY PRECAUTIONS

CHARGING TIMES BASED ON USING A CURRENT TAPERING CHARGER SET AT 14.5 TO 15 VOLTS AND 100% RE-CHARGE
CHARGING AMPS CHARGING TIME

15 AMPS

11.00 Hours Minimum / 15.00 Hours Max

20 AMPS

8.33 Hours Minimum / 12.33 Hours Max

25 AMPS

7.00 Hours Minimum / 11.00 Hours Max

30 AMPS

6.20 Hours Minimum / 10.20 Hours Max

35 AMPS

5.67 Hours Minimum / 9.67 Hours Max

40 AMPS

5.29 Hours Minimum / 9.29 Hours Max

Never remove vent caps under the top label – this is a sealed battery.
Prevent tools or other metal objects from falling across the battery terminals as this will short circuit the battery and spark.
Always wear protective clothing and eye wear when servicing a battery.
Sulfuric acid can cause severe burns. If your skin comes in contact with acid, flush with water immediately. If acid goes into your eyes, flush with water immediately for 15 minutes and seek medical help as soon as possible.
Keep any battery out of reach of children.

DANGER/POISON

FLUSH EYES Immediately with water and get medical help.

STAND BACK Explosive gases can cause

blindness or injury.

Pb

SULFURIC ACID Will cause severe burns and possibly blindness.

PROP 65 WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer or birth defects, or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

References

• P65Warnings.ca.gov
• Skar Audio - Car Audio Subwoofers, Amplifiers, Speakers and more

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>