SKAR AUDIO BATT65AH AGM High Performance Batteries User Manual

: June 1, 2024
: skar audio

Table of Contents

SKAR AUDIO BATT65AH AGM High Performance Batteries
USER MANUAL
INTRODUCTION
INSTALLATION INSTRUCTIONS
CHARGING INSTRUCTIONS
WARNINGS & SAFETY PRECAUTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SKAR AUDIO BATT65AH AGM High Performance Batteries

SKAR AUDIO-BATT65AH-AGM High-Performance-Batteries-
product

Specifications

Type: AGM High Performance Battery
Model: SK-BATT65AH
Charging Voltage: 14.4v max
Terminal Tightening Torque: 8 ft-lbs max

Charge Battery Before Initial Use
Before installation, ensure the battery is fully charged using an AGM-specific charger not exceeding 14.4v. Do Not Over-Tighten Battery Terminals:
Avoid exceeding 8 ft-lbs max torque when tightening terminals to prevent damage to the battery.

Installation Instructions
Clear the designated battery location of debris. Securely mount the battery to prevent tipping. Connect leads to correct terminals.

Dual Battery Setup
If using dual batteries, wire them in parallel for increased amperage output or in series for doubled voltage output.

USER MANUAL

CAUTION
PLEASE READ BEFORE INSTALLING

INTRODUCTION

We take immense pride in the quality and reliability of our products. Skar Audio AGM High Performance Batteries are built to withstand even the most demanding conditions, ensuring that they will stand the test of time. Say goodbye to the inconvenience and frustration of battery failures, and welcome the peace of mind that comes with our exceptional batteries.

CHARGE BATTERY BEFORE INITIAL USE
Before installing and wiring up your new Skar Audio AGM High-Performance Battery, you will want to ensure that the battery is fully charged. To do so you will need to connect your new Skar Audio AGM High Performance Battery to an AGM speciﬁc charger that does not exceed 14.4v when charging. Once your AGM speciﬁc charger has completed the charging cycle, you can now install your new Skar Audio AGM High-Performance Battery.
DO NOT OVER-TIGHTEN BATTERY TERMINALS
Whether you are using the included automotive post adapters, bolts, or screws, do not exceed 8 ft-lbs max when tightening. Over-tightening can strip out the bolt holes and render your battery useless.

INSTALLATION INSTRUCTIONS

Make sure that the designated battery location is clear of any debris or obstructions, as the presence of such materials could potentially result in sparking if the battery comes into contact with them.
Once you have successfully placed your new battery in its installation location, securely mount the battery to ensure it cannot fall over. Skar Audio High Performance Batteries are designed to be universal and will ﬁt in most automotive, truck, and marine applications.
Connect the battery leads to the correct terminals, (+) Positive lead to (+) Positive terminal / (-) Negative lead to (-) Negative terminal. Reminder: Do not tighten the terminal bolts, screws, or automotive post adapters more than 8 ft-lbs when connecting battery leads.
If you are running a dual battery setup, ensure that the batteries are wired together in parallel which is (+) Positive to (+) Positive and (-) Negative to (-) Negative. Parallel will double the amperage output and reserve capacities. If you wire your batteries in series which is (+) Positive to (-) Negative you will double the voltage output of your Skar Audio AGM High Performance Batteries.
If this battery is being used as a secondary battery, please ensure it is properly grounded to the chassis (no plastic or painted metal, must be bare metal) and proper fusing has been achieved.

CHARGING INSTRUCTIONS

When charging your Skar Audio AGM High Performance Battery you will always want to use an AGM speciﬁc charger that features an automatic shutoff to prevent
over-charging or under-charging which could cause permanent damage to your battery.
Charge your Skar Audio AGM High Performance Battery before initial use. This will ensure the battery will operate correctly once installed in your vehicle.
Never allow your battery to charge above 2.4 volts per cell as this will cause the battery to “gas” and once the oxygen from the battery has vented, it cannot be restored.

SK-BATT65AH SPECIFICATIONS

LONG TERM VEHICLE STORAGE

If your vehicle will be going into long term storage you will want to follow the instructions below to prevent long term damage to your Skar Audio AGM High Performance Battery.

Disconnect the battery from the main battery leads as well as any devices that will draw power.
Do not leave a trickle charger on the battery as this will overcharge the battery.
Use a battery tender device to ensure the battery stays at peak voltage while in storage.
Test the voltage of your battery after it has been in storage. If it is below 12.6 Volts, you will need to charge the battery back to full with your AGM specific charger before using it in your vehicle again.

CHARGING TIMES BASED ON USING A CURRENT TAPERING CHARGER SET AT 14.5 TO 15 VOLTS AND 100% RE-CHARGE

CHARGING TIMES BASED ON USING A CURRENT TAPERING CHARGER SET AT 14.5 TO 15 VOLTS AND 100% RE-CHARGE

WARNINGS & SAFETY PRECAUTIONS

Never remove vent caps under the top label – this is a sealed battery.
Prevent tools or other metal objects from falling across the
battery terminals as this will short-circuit the battery and spark.
Always wear protective clothing and eye wear when servicing a battery.
Sulfuric acid can cause severe burns. If your skin comes in contact with acid, flush with water immediately. If acid goes into your eyes, flush with water immediately for 15 minutes and seek medical help as soon as possible.
Keep any battery out of reach of children.

DANGER/POISON

PROP 65 WARNING:
This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer or birth defects, or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov