WatchGuard AP230W Wireless Access Point User Guide
- September 20, 2024
- Watchguard
Table of Contents
WatchGuard AP230W Wireless Access Point
Specifications
- Product: WatchGuard AP230W Wireless Access Point
- Power Input : 54VDC
- Power Options: WG8599 (US), WG8600 (EU), WG8601 (UK), WG8602 (AUS), WG9028 (US), WG9029 (EU), WG9030 (UK), WG9031 (AUS)
- Radio Frequencies: 2412 – 2472 MHz, 5180 – 5240 MHz, 5260 – 5320 MHz, 5500 – 5700 MHz
- Max Power: 19.77 dBm, 22.81 dBm, 22.83 dBm, 26.34 dBm
- Compliance: EU Directives – Low Voltage, Electromagnetic Compatibility, Energy-related Products, RoHS, WEEE Directive, The Radio Equipment Directive
- Common Standards: EN IEC 62368-1:2020+A11:2020, EN 55032:2015/A1:2020, EN 55035: 2017/A11:2020, EN IEC 61000-3-2:2019/A1:2021, EN 61000-3-3:2013/A2:2021
- Wireless Standards: EN IEC 62311:2020, EN 301 489-1 v2.2.3, EN 301 489-17 v3.2.4, EN 300 328 v2.2.2, EN 301 893 v2.1.1
MODEL
AP230W
ACTIVATE
INSTALL
CONNECT
CONFIGURE
Wi-Fi in WatchGuard Cloud
NOTICES:
All WatchGuard products are designed and tested to meet strict safety
requirements. These requirements include product safety approvals and other
global compliance standards. Please read these instructions carefully before
operating the product, and refer to them as needed to ensure the continued
safe operation of your product. Additional information about the hardware,
including additional languages, a full list of safety approvals, global
compliance standards, and certifications can be found in the Hardware Guide
for this device located on the WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
- Do not place objects on the power cord.
- Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
- Never push objects of any kind into slots or openings on this equipment. Making contact with a voltage point or shorting out a part may result in fire or electrical shock.
- When removing or installing an appliance, follow the general installation safety instructions.
If protective earthing is used as a safeguard, the instructions shall require connection of the equipment protective earthing conductor to the installation protective earthing conductor (for example, by means of a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic interference (EMI) requirements, you must make sure the power source is connected to earth ground before you connect power to the device.
Connect the PoE interface only to PoE networks, without routing to the outside plant.
This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or Limited Power Source or PS2) rated 54V DC, 1A minimum, maximum ambient temperature (Tma)=40°C, or supplied by a Listed PoE Adapter marked “L.P.S.” (or Limited Power Source or PS2) rated 54VDC, 0.6A minimum, maximum ambient temperature (Tma)=40°C. For more information regarding approved power sources, see the Hardware Guide for this device.
This product is for indoor use only.
- Hereby, WatchGuard Technologies Inc. declares that the radio equipment type AP230W Wireless Access Point is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.watchguard.com/wgrd-help/documentation/hardware-guides
- This device has software that cannot affect compliance with the Radio Equipment Directive (RED) 2014/53/EU, even if the software is changed or replaced.
- This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in the indicated countries.
Declaration of Conformi
WatchGuard TECHNICAL SUPPORT
- 1.877.232.3531
- (U.S. and Canada)
- +1.206.613.0456
- (all other countries)
- www.watchguard.com/support
- ADDRESS: 255 S. King St. Suite 1100, Seattle, WA 98104
- U.S. SALES: 1.800.734.9905
- INTERNATIONAL SALES: +1.206.613.0895
- WEB: www.watchguard.com
©2024 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-4230-001 011224 Rev A
FAQ
- Q: Can I use this product outdoors?
- A: No, this product is for indoor use only.
- Q: How do I ensure safety and compliance with regulations?
- A: Make sure to connect the power source to earth ground beforeconnecting power to the device. Follow all provided instructions for proper installation and usage.
References
- My Products
- Get Started with WatchGuard Devices
- WatchGuard | Comprehensive Cybersecurity Solutions
- WatchGuard | Comprehensive Cybersecurity Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>