CASO 3511 Juice Fit Pro User Guide
- September 24, 2024
- caso
Table of Contents
3511 Juice Fit Pro
“`html
Product Specifications
- Product Name: Juice Fit Pro
- Model Number: JFP-2000
- Power: 800 Watts
- Capacity: 1.5 Liters
- Material: Stainless Steel, BPA-free Plastic
Product Usage Instructions
Assembling the Juice Fit Pro
-
Check that the silicone plug is placed in the pulp outlet
located on the underside of the juicing container. -
Place the juicing container on the motor unit.
-
Insert the juicing auger into the juicing container, pressing
it down and rotating until it clicks into place. -
Attach the feeding tube to the appliance ensuring the arrow on
the front aligns with the symbol on the juicing container. -
Turn the feeding tube until the arrow aligns with the symbol.
Ensure the lid is open to allow the feeding tube to click into
place correctly. -
For proper assembly, keep the lid open so that the feeding tube
locks into place securely.
Refer to the safety instructions and detailed descriptions in
the operating manual for additional guidance.
Frequently Asked Questions (FAQ)
Q: How do I clean the Juice Fit Pro?
A: To clean the Juice Fit Pro, disassemble the parts as per the
instructions, wash them with mild detergent and warm water, and dry
thoroughly before reassembling.
Q: Can I use the Juice Fit Pro for citrus fruits?
A: Yes, you can juice citrus fruits with the Juice Fit Pro.
Remove any seeds or pits before juicing for best results.
“`
DE
Kurzanleitung für den Zusammenbau des Juice Fit Pro
1. Prüfen Sie, dass der Silikonstopfen im Tresterauslass platziert ist
(siehe Unterseite Pressbehälter).
2. Den Pressbehälter auf die Motoreinheit platzieren. 3. Die Pressschnecke in
den Pressbehälter setzen. Drücken und
drehen Sie diese herunter bis sie einrastet.
4. Den Einfüllschacht so auf dem Gerät platzieren, dass der Pfeil ,
der sich auf der Vorderseite befindet, auf das Symbol des Pressbehälters
zeigt.
5. Den Einfüllschacht drehen, sodass der Pfeil auf das Symbol
zeigt.
6. Für den Zusammenbau muss der Deckel geöffnet sein, damit
der Einfüllschacht korrekt einrastet.
Beachten Sie die Sicherheitshinweise und ausführlichen Beschreibungen, die
sich in der Bedienungsanleitung befinden.
CASO GmbH, Raiffeisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info
@caso-design.de, www.caso-design.de
EN
Quick guide for assembling the Juice Fit Pro
1. Check that the silicone plug is placed in the pulp outlet
(see the underside of the juicing container).
2. Place the juicing container on the motor unit. 3. Place the juicing auger
in the juicing container, press it down and
rotate until it clicks into place.
4. Place the feeding tube on the appliance. The arrow on the
front should point to the symbol on the juicing container.
5. Turn the feeding tube until the arrow points to the symbol.
The lid must be open so that the feeding tube can click into place correctly.
6. For assembly, the lid must be open so that the feeding tube
locks into place correctly.
Observe the safety instructions and detailed descriptions, which can be found
in the operating instructions.
CASO GmbH, Raiffeisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info
@caso-design.de, www.caso-design.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>