CASO 3160 KM 1800 Black Multireibe Instruction Manual
- May 15, 2024
- caso
Table of Contents
CASO 3160 KM 1800 Black Multireibe
Specifications
- Grating attachment with filling chute
- Tamper included
- Drum insert for cutting, coarse grating, and fine grating
- Suitable for fruit, vegetables, nuts, cheese, chocolate, etc.
- Speed levels: 1-3
Assembling the multi-grater
- Undo the front cover screw and remove the cover of the accessory drive shaft.
- Put on the grating attachment and retighten the screw.
- Place the desired drum insert (cut, coarse grate, or fine grate) in the grating attachment.
Using the multi-grater
- Cut ingredients into pieces that fit into the feed chute.
- Ensure the multi-grater is firmly attached to the motor head.
- Put ingredients into the feed chute and place a container under the outlet.
- Plug in the power plug and select a speed level between 1-3.
- Start the appliance by pressing the button.
- Carefully press ingredients down with the tamper.
- After use, switch off the appliance and unplug it from the outlet.
After using the multi-grater
- Undo the screw to remove the grater attachment and refit the drive shaft cover.
- Wash all components that touched food in hot water immediately after use. Drum inserts and tamper are dishwasher safe.
Safety Precautions
- Before assembling/disassembling, always unplug from the power outlet.
- If something blocks the drum insert, unplug and wait for it to stop before attempting to remove the blockage.
- Never reach into the filling shaft; use the tamper.
- Handle sharp drum inserts carefully; be cautious when emptying or cleaning them.
FAQ :
-
Q: Can I use the multi-grater for hard cheeses?
A: Yes, the multi-grater can handle hard cheeses. Use the drum insert for fine grating for best results. -
Q: Is it safe to wash all components in a dishwasher?
A: The drum inserts and tamper are dishwasher safe. However, it’s recommended to hand wash other components for longevity.
Multi-grater attachment (3160) for KM 1800 Black
Overview of the multi-grater
- Grating attachment/filling chute
- Tamper
- Drum insert for cutting
- Drum insert for coarse grating
- Drum insert for fine grating
Assembling the multi-grater
-
Undo the front cover screw and remove the cover of the accessory drive shaft.
-
Put on the grating attachment (1) and retighten the screw.
-
Place the desired drum insert (cut (3), coarse grate (4) or fi ne grate (5)) in the grating attachment.
Suitable foods
fruit, vegetables, nuts, cheese, chocolate, etc.
Using the multi-grater
- Cut the desired ingredients into pie-ces that fit into the feed chute.
- Check that the multi-grater is firmly attached to the motor head.
- Put the ingredients into the feed chute of the grating attachment and place a container under the outlet of the multi-grater.
- Plug the power plug into the outlet.
- Tap the button and select a speed level between 1-3.
- Start the appliance by pressing the button.
- Carefully press the ingredients down with the tamper (2).
- After use, switch off the appliance with the button and pull the plug out of the outlet.
After using the multi-grater
- Undo the screw to remove the grater attachment and refit the drive shaft cover to the appliance.
- Wash all components that have come into contact with food in hot rinsing water. Clean all components immediately after use. The drum inserts and the tamper are dishwasher safe.
- Before assembling/disassembling the multi-grater, unplug it from the power outlet.
- If something is blocking the drum insert, first pull the plug from the power outlet and wait until the appliance has come to a complete stop. Then carefully try to remove the blockage.
- Never reach into the filling shaft of the grater attachment; always use the tamper.
- The drum inserts of the multi-grater are sharp; handle them carefully. Be careful when emptying or cleaning the inserts.
CASO GmbH, Raiffeisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info @caso-design.de , www.caso-design.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>