COMMSCOPE PPL-CM-16AU-8P-2X4-OM4-BEU Propel ULL Multimode OM4 Conversion Module Owner’s Manual

: September 20, 2024
: CommScope

Table of Contents

PPL-CM-16AU-8P-2X4-OM4-BEU Propel ULL Multimode OM4 Conversion Module
Product Information
Specifications
Dimensions
Optical Specifications
Environmental Specifications
Safety Standard
Product Usage Instructions
Installation
Removal
Maintenance
- FAQ
Q: Can the Propel ULL Multimode OM4 Conversion Module be
Q: What is the maximum insertion loss for this module?

PPL-CM-16AU-8P-2X4-OM4-BEU Propel ULL Multimode OM4 Conversion Module

“`html

Product Information

Specifications

Functionality: Fiber Conversion Module
Color, front: Gray
Color, rear: Gray
Data Module Type: Breakout
Interface, front: MPO Internal shutters | MPO Pinned
Interface Feature, front: MPO Internal shutters
Interface, rear: MPO Non-Pinned
Interface Feature, rear: MPO Non-Pinned
Polarity: Method B Enhanced (ULL)
Total Fibers, quantity: 32
Total Ports, quantity, front: 4
Total Ports, quantity, rear: 2

Dimensions

Height: 11 mm | 0.433 in
Width: 65 mm | 2.559 in
Depth: 170 mm | 6.693 in

Optical Specifications

Fiber Mode: Multimode
Fiber Type: G.657.A2 | OM4
Insertion Loss, maximum: 0.4 dB

Environmental Specifications

Qualification Standards: IEC 61753-1 | TIA-568.3-D

Safety Standard

UL 62368

Product Usage Instructions

Installation

Identify the front and rear of the panel.
Slide the Propel ULL Multimode OM4 Conversion Module into the
designated slots.
Ensure proper alignment and secure the module in place.

Removal

To remove the module, gently push on the release mechanism and
slide it out.
Handle with care to avoid damage to the module or surrounding
components.

Maintenance

Regularly inspect the module for any signs of damage or
contamination. Clean if necessary following manufacturer
guidelines.

FAQ

Q: Can the Propel ULL Multimode OM4 Conversion Module be

installed from both the front and rear?

A: Yes, this module can be installed and removed from either the
front or rear of the panel for added flexibility in deployment.

Q: What is the maximum insertion loss for this module?

A: The maximum insertion loss for this module is 0.4 dB,
ensuring efficient signal transmission.

“`

760257061 | PPL-CM-16AU-8P-2X4-OM4-BEU

Propel ULL Multimode OM4 Conversion Module, (2) MPO-16/APC nonpinned ports rear, (4) MPO-8/UPC pinned ports front
Ultra-low loss (ULL) with Method B Enhanced polarity Can be installed and removed from front or rear of panel Serialized QR code provides easy access to factory optical test results This component requires 2 of the 12 lanes on the Propel Panel blade

Product Classification
Regional Availability Portfolio Product Type Product Brand Product Series
General Specifications
Functionality Color, front Color, rear Data Module Type Interface, front Interface Feature, front Interface, rear Interface Feature, rear Polarity Total Fibers, quantity Total Ports, quantity, front Total Ports, quantity, rear
Dimensions
Height Width Depth

Page 1 of 2

©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: August 30, 2024

760257061 | PPL-CM-16AU-8P-2X4-OM4-BEU

Optical Specifications
Fiber Mode Fiber Type Insertion Loss, maximum

Multimode G.657.A2 | OM4 0.4 dB

Environmental Specifications

Qualification Standards

IEC 61753-1 | TIA-568.3-D

Safety Standard

UL 62368

Packaging and Weights

Packaging quantity

1

©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: August 30, 2024

Page 2 of 2