VEVOR GFK-160-V1 Paste Liquid Filling Machine User Manual

VEVOR GFK-160-V1 Paste Liquid Filling Machine User Manual

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel freetocontact us:
Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretationofouruser manual. The appearance of the product shall be subject totheproduct you received. Please forgive us that we won’t informyouagainifthere are any technology or software updates on our product.

WARNING

1. Read carefully and understand all ASSEMBLY ANDOPERATIONINSTRUCTIONS before operating.
2. Failure to follow the safety rules and other basic safety precautionsmayresult in serious personal injury.

GENERAL SAFETY RULES

1. Important reminder 1.Before use, please carefully read the product manual and ensure that you understand and comply with all safety warnings and usage precautions.
2. Do not use this product for other non designated purposes to avoid unexpected risks.
3. This product is only applicable to users within the specified age group and scope of application. Please strictly comply with relevant age restrictions and warnings.
4. If there are any abnormalities in the product, please stop using it immediately and contact the after-sales service center for consultation or arrange for repair.

Environmental requirements for use

1. Avoid direct sunlight or contact with fire sources to prevent product damage or fire.
2. Please ensure a stable usage environment and avoid the product from being hit or dropped to avoid damage.

Safety Operation Guidelines

1. Please use a suitable power supply and voltage, and do not use damaged power cords or plugs.
2. When using this product, do not short-circuit circuits or connect mismatched devices to avoid risks such as electric shock and fire.
3. When foreign objects are found on the surface of the product, please immediately stop using and remove the foreign objects before continuing to use.
4. When using this product continuously for a long time, please rest in good time to avoid excessive fatigue.

Maintenance and upkeep

1. Regularly maintain and clean the product. Before cleaning, please disconnect the power supply and wipe it with a dry cloth. Be careful not to use alcohol, acid or alkali solutions, etc Corrosive substances.
2. When the product is not in use for a long time, please disconnect the power supply promptly to save energy and extend the product’s lifespan.
3. Do not disassemble the product or replace components on your own. If you encounter any malfunctions, please contact the after-sales service center.

Emergency handling measures

1. When there are abnormal situations or accidents with the product, please stop using it as soon as possible. If overheating, smoking, or abnormal sound are found, please immediately cut off the power supply and contact the after-sales service center.
2. If the product involves an emergency situation that may harm personal safety, please call the emergency rescue number in a timely manner.

Disclaimers

1. We attach great importance to the safety and quality of our products, but cannot assume responsibility for safety accidents caused by improper use or operation.

SAVE THESE INSTRUCTIONS

MODEL AND PARAMETER

Soy sauce, beverages, white wine, vinegar, milk, alcohol ( less than 40%) etc
Filling Range| 5ml-3500ml
Max Flow Rate| 3.5 L/min
Control Mode| Pedal Switch and Automatic
Rating(s)| AC120V 60Hz
Power(Max.)| 34W

STRUCTURE DIAGRAM

1. Built-up Bracket
2. Outlet Hose and Filling Nozzle
3. Inlet HoseandFilter
4. Control Panel
5. Pedal Switch
6. Built-up Bracket

COMPONENTS

OPERATING INSTRUCTIONS

1. Connect the two rods with a cross clamp as shown.

2. Install the T-clamp and fasten with screws

3. Install the above installed rods on the T clamp as shown.

4. Connect the pedal switch as shown.

5. Insert the power cordasshown.

6. Product assembly completed.
   Note: The built-up Bracket and the filling nozzles can be adjustedasneeded.

The operating instructions

**Introduction of digital display interface:

**

1. The machine has two working modes(working mode must beset beforeuse):Continuous Work,Inching Work(pedal control) Through the button (continuous/inching)
   If you want to set it to Continuous Work modes :

2. Press the pause button first(on/off).The pause status light lightsup·

3. Press the button (continuous/inching) When continuous work lights up, it means that it is already in Continuous Work mode

4. Press the start button (on/off) to start working Same way set up to Inching Work mode (pedal mode)

5. How to adjust filling time, filling speed, and waiting time Press the Settings button (Parameter set)

   • Need to press 2-3 seconds.
   • When the red light 1 flashes, it’s ready to go
   • The cursor position is where the number can be set
   • Then through (↕)(↔) buttons (+)(-) buttons to adjust the time, speed, waiting time you need

6. The count cannot be adjusted and can only be clearedbythebutton(Zero cleaning)

7. Adjust the selection of 6 groups of memory functions

   • through the button (O) below
   • First press (Parameter set)
   • then press (O) button to switch 6 groups of functions
   • You need to set it up and store it first

MAINTENANCE

1. It is better to clean the machine with clean water after every use, which can prolong the service life of the pump.
2. Please clean the product and the filter in time after each use.
3. When the machine is not in use, please empty the liquid and store it in a ventilated and dry place.
4. Please store the product in a dry and ventilated place.
5. Please replace the following consumable parts regularly:
   Hose, Filter, Filling Nozzle.

TROUBLESHOOTING

water from the intake pipe to the pump and then start the machine.
The pump can’t get the liquid out| Hose inlet and outlet reinverted| Confirm hose inlet intoliquid tank.
The power cord is notplugged in| Reconnect the power cord
Hose folded or damaged| Smooth hose or replace hose
The power indicator is off| The power cord is not plugged in| Reconnect the power cord

Technical Support and E-Warranty Certificate
www.vevor.com/support

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>