BASS JAXX SP-0251 Ultimate Wireless Speaker Bluetooth Instruction Manual
- September 20, 2024
- BASS JAXX
Table of Contents
SP-0251 Ultimate Wireless Speaker Bluetooth
Specifications
- Product: Pillar Wireless Speaker SP-0251 IM
- Size: 322.5mm (width) x 100mm (height)
- Package Contents:
- 1 Pillar Wireless Speaker (8.6cm x 14.6cm x 8.6cm)
- 1 Charging Cable (50cm)
- 1 Instruction Manual
Product Overview
The Pillar Wireless Speaker features a USB Type-C charging port,
volume control buttons, power on/off button, Bluetooth and FM radio
mode button, and an LED indicator.
Usage Instructions
Power On/Off
To power on, press and hold the Power Button for 2 seconds. To
power off, press and hold the Power Button for 2 seconds. Always
remember to power off the speaker when not in use.
Pairing with Mobile Device
-
Ensure the wireless speaker is within 32 feet of your mobile
device. -
Power on the speaker.
-
Activate Bluetooth on your phone and select “SP-0251 SPK” from
the available devices. -
You will hear a beep when pairing is successful.
Reconnecting to Mobile Device
When powered on, the speaker will automatically connect to the
last paired device.
Charging without Dock
- Use the provided USB Type-C cable.
- Connect the cable to the speaker and a wall adapter.
- The LED indicator will turn red while charging and turn off
when fully charged.
TWS Mode
- Turn on both speakers.
- Disconnect from any Bluetooth device.
- Keep side by side.
Bluetooth Mode
FM Radio Mode
FAQs
Q: Can I use any USB Type-C cable to charge the speaker?
A: No, only use the included USB Type-C cable for charging to
ensure compatibility and safety.
Q: How do I know if TWS mode is successfully enabled?
A: Both speakers will emit an alert sound when successfully
paired in TWS mode.
Date: 24 JUL 2024 Product: SP-0251 IM
SP-0251_IM
Size: 322.5(w) x 100(h) mm
SKU:
Instruction Manual
Thank you for purchasing the Pillar Wireless Speaker. This manual provides
more information about this wireless speaker,
please read the instructions before using.
Product Overview
Front
2 Back
1
3 4 5
6
1. USB Type-C Charging Port
2. Volume Down / Previous Song Button
3. Power On/Off Button 4. Bluetooth
FM Radio Mode Button 5. Volume Up / Next
Song Button 6. LED Indicator
Package Contents
1(One) Pillar Wireless Speaker 3.4in. x 5.7in. x 3.4in. (8.6cm x 14.6cm x
8.6cm) 1(One) Charging Cable 19.7in. (50cm) / 1(One) Instruction Manual
Power On/Off
Power on Press and hold 2 second on the Power Button. Power off Press and hold
2 second on the Power Button. Note: Always power off the speaker when not in
use.
Pair Wireless speaker with your mobile device
1. Keep the distance between your wireless speaker and mobile phone (or other
devices) within 32 Feet.
2. Power on the wireless speaker. 3. Activate the Bluetooth function on your
phone within range and select
” SP-0251 SPK” from the list shown. 4. You will hear a beep sound when pairing
is successful.
Reconnect Wireless speaker to your mobile device
When powered on, the wireless speaker will automatically connect with the last
successfully paired device.
Charging your Wireless speaker without Charging Dock
1. Use the USB Type-C charging cable provided with this wireless speaker. 2.
Connect the USB Type-C plug to USB Type-C charging port on the
speaker, then connect the USB plug to a wall adapter to begin charging. 3. The
LED Indicator will turn red while charging and will turn off once
fully charged.
NOTE: · You must select a qualified charger from a regular manufacturer. · You
must charge the Wireless speaker if it has been not used for
more than 6 months.
USB Plug
USB Type-C Charging Plug
CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product.
TWS Mode
(2pcs Pillar Wireless Speakers are needed for TWS mode)
1. Turn On both wireless speakers. 2. Disconnect both wireless speakers from
any Bluetooth device. 3. Keep both wireless speakers side by side. 4. Press
and hold the Mode Button on ONE of the wireless speakers
for 2 seconds. And then it will have an alert sound. 5. The wireless speakers
will paired in few seconds. When successfully
paired, both wireless speakers will have another alert sound. 6. Now you can
follow the “Pair Wireless speaker with your mobile device”
to pair with the mobile device. 7. To disable the TWS mode, press and hold the
Mode Button on ONE
of the wireless speakers for 2 seconds. They will have an alert sound and then
unpaired.
NOTE: TWS mode is not supported in FM mode.
Bluetooth Mode
Short press Power Button to Play or Pause the music. Short press the Volume Up or Down Buttons to switch to next or previous track. Long press the Volume Up or Down Buttons to tune the volume.
Change to FM Radio Mode
Short press the Mode Button once to change to FM Radio mode. Short press the
Mode Button twice to scan channels. Short press the Volume Up or Down Buttons
to switch to next or previous channel. Long press the Volume Up or Down
Buttons to tune the volume. Short press the Mode Button once again to change
to Bluetooth mode. Note: Plug in the USB Type-C Charging Cable will enhance
the FM sensitvity.
Technical specification
Speaker Power: 5W Driver Diameter: 52 mm Impedance: 4 Ohms Playing Time: 1.5 – 2 Hours Charging Time: 1.5 – 2 Hours
Power Supply: Li-Ion Battery 3.7V 500 mAh Bluetooth Range: 32 feet Bluetooth Version: 5.3 USB Type-C Charging Cable Included USB Type-C Charging Cable Rating 5V/1A Max.
FAQ
If the Wireless speaker cannot be paired with your device, please try the
following: Ensure that your speaker is in pairing mode or reconnection mode.
Ensure that Bluetooth search function of your mobile device is activated.
If the Wireless speaker cannot be recharged: If you use a power outlet, ensure
that the power supply is connected securely and the outlet works.
FCC STATEMENT This device complies with the part 15 of the FCC rules.
Operation is subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Caution:
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. The user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or experienced radio/ TV
technician for help.
RF Warning Statement: The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is DC 5V 1A. -In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/adapter for charging the product. -Only charge the product at ambient temperatures between 10°C/50°F and
40°C/104 °F. -Do not heat above 70°C/158°F, eg. Do not expose to sunlight or
throw into fire. -Switch off the product after use. -Please note that we won’t
take any responsibility for any wrong operation (eg. Voltage higher than 5V)
as this may result in severe injury or loss of property, and we cannot control
the operating process during the time the user using this product. -In extreme
cases, abuse or misuse of Lithium battery pack can lead to explosion, heat
generation, fire development or smoke development.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 1616 Holdings, Inc. is under license. Other trademarks and trade names are those of their respective owners.
FCC ID: 2ADM5-SP-0251
Keep All Relevant Information For Future Reference
ITEM# SP-0251
Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia,
PA 19106
Made in China
Approval:
Date:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>