PCNA XO-9700 Boundary Natural Bamboo Bluetooth Speaker Instruction Manual

**PCNA XO-9700 Boundary Natural Bamboo Bluetooth Speaker Instruction Manual

**

Functions

1. Vol +/Next Track
2. Play/Pause/Power Button
3. Bluetooth Indicator
4. Vol-/Previous Track
5. LED Indicator
6. Micro-USB charging port
7. AUX Port

What’s included

• 1 x Bamboo Speaker (7197-13)
• 1 x USB to Micro-USB Charging Cable
• 1 x Instruction Manual

Tech Specifications

• Playing time: up to 8 hrs at max volume
• Charging time: up to 5 hrs
• Pairing Name: “Bamboo

Instructions

(Be sure to fully charge the speaker before using fir the first time).

1. Charging the Speaker
   Connect the provided charging cable to a power source and to the micro USB port on the speaker (6)
   The LED indicator light will glow red when charging and turn off when fully charged.

2. Bluetooth® Setup:

   • Press and hold power button(2) to turn ON BLUE when in pairing mode.
   • Turn on the Bluetooth function on mobile device, Select “Bamboo” pairing name.
   • LED will turn solid BLUE if successfully paired.
     Speaker will automatically pair if the mobile device has been paired before.

3. Playing Music:

   • Short press “Power Button” key to pause music. A second short press will resume playing music again.
   • Long press “Previous track/Vol-”, the speaker will play the previous track.
   • Short press to reduce speaker volume.
   • Long press “Vol+/Previous Track”, the speaker will play the next track.
   • Short press to increase speaker volume.

4. Call Function:

   • Short press “Power Button” to answer a incoming call, press again to end call.
   • Long press to reject the call.

5. AUX Function:

   • Press and hold power button(2) to turn ON the speaker.
   • Find the speakers AUX-IN port(7), plug in a 3.5mm AUX cable(Not included) into the port and connect to the mobile device.

SAFETY PRECAUTIONS

WARNING– When using this product, basic precautions should always be followed, including the following:

1. . Read all the instructions before using the product.
2. Device main unit contains an internal lithium -ion battery. Upon initial use or after a prolonged storage period, fully charge it once.
3. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
4. To reduce the risk of injury, close supervision is necessary when the product is used near children.
5. Keep out of reach of children.
6. Use of a power supply or charger not recommended or sold by device manufacturer may result in a risk of fire or injury to persons.
7. Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
8. Do not use the device if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
9. Do not disassemble the device. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury
10. Do not expose a device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause explosion.
11. Have services performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
12. Do not charge the device while using the device to charge another device. Do not charge the device for more than 4-6 hours and do not leave unattended. Switch off the device when not in use.
13. Switch off the device when not in use

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful  interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet ona circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with
Canadian ICES-003.

Name of the Distributor:
Leedsworld Inc
Address of the
Distributor:
400 Hunt Valley Road,
New Kensington,
PA 15068 USA.
FCC ID: 2ADK3-9700
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>