PCNA SM-2830 Square Wireless Charging Pad Instruction Manual

PCNA SM-2830 Square Wireless Charging Pad

Product Information: Square Wireless Charging Pad SM-2830

The Square Wireless Charging Pad SM-2830 is a device designed for wireless charging of mobile phones. It comes with a USB cable for connecting the device to a USB power source. The device is FCC and IC compliant and has been tested to comply with the limits for a Class B digital device. The distributor of the product is Bulletline Inc located in Hialeah, FL.

Product Usage Instructions:

1. Connect the USB output of the included cable to a USB power source.
2. Insert the other end of the USB cable into the input port (1) of the wireless charging pad.
3. Place your mobile phone on the charging surface of the wireless charging pad.
4. Ensure that there is no object between the device and charging surface that would interfere with the charging process.

Safety Precautions:

1. Read all instructions before use.
2. Never store or use this product in a damp or wet environment.
3. Do not use the device if damaged or malfunctioning.
4. Do not disassemble the device. Incorrect reassembly may cause harm or damage to the device.

• WARNING: When using this product, basic precautions should always be followed:

1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
3. Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
4. To reduce the risk of injury, close supervision is required when the product is used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury
7. Do not use the device if damaged or modified.
8.  Do not disassemble the device. For repairs, seek a qualified service professional. incorrect reassembly may result in a risk of fire or injury.
9. Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause explosion.
10. Ensure that qualified service professionals use only identical replacement parts to ensure product safetv.
11. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating.

Please remove any attachments from the phone before charging on this device, attachments can interfer with wireless charging and lead to over heating.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warning:
Changes or modifications not expressly  approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with mini mum distance between 20cm the radiat or your body: Use only the supplied antenna.

IC Statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development  Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10cm between the radiator & body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
Name of the Distributor:
Bulletline Inc
Address of the Distributor:
6301 East 10th Avenue,
Suite 110
Hialeah, FL 33013 USA.
WWW.PCNA.COM
FCC ID:2 BAUN-AB0475 Made in Laos

Note:

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Functions:

1. Micro-USB Input Port
2. LED indicator
3. Charging Pad Surface

What’s included:

• 1 x Wireless Charging Pad
• 1 x USB to Micro-USB Charging Cable
• 1 x Instruction Manual

Tech Specifications

• Input power: 5V/1.5A
• Wireless Output: 5W

Instructions:

1. Wireless Charging Mobile phones and other electronic devices:
   •  Insert the Micro-USB output of charging cable (included) into the input port(1) of wireless charging pad and connect the USB output of the cable to a USB power source or certified wall adapter (not included).
   •  LED indicator(2) will will flash BLUE & RED 2 times, then glow RED when the device is in wireless charging standby.
   • Place the wireless charging supported mobile device on the wireless charging surface(3), LED will glow BLUE when device is charging.
   • Phone will begin to charge automatically.
   • Once fully charged remove the device.
   •   Note: When wireless charging, be sure there is no object between the device and charging surface that would interfering with the charging process.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

References

• PCNA | World's Leading Supplier of Customized and Personalized Hard Goods and Apparel

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>