COMMSCOPE MCG22RHDX-11M9120 Monopole Sector Frame Instruction Manual
- September 19, 2024
- CommScope
Table of Contents
MCG22RHDX-11M9120 Monopole Sector Frame
“`html
Specifications:
- Material: Steel
- Color: Black
- Dimensions: 120” (H) x 132” (L) x 84” (W)
- Weight: 2148.18 lbs
Product Usage Instructions:
Installation:
1. Identify any hazards or obstructions prior to installing the
product.
2. Ensure the monopole diameter is between 20 to 50 OD.
3. Tighten all bolts securing flat plates and U-bolts using the
turn-of-nut method.
4. Install flat washer on the near side and lock washer on the
far side.
Packaging:
1. Packaging must meet Commscope requirements per document
IS-PL-3005.
2. Place printed document inside a polybag and then in the
shipping container.
3. Extra hardware may be supplied, bagged, and shipped along
with the product.
FAQ:
Q: What are the dimensions of the product?
A: The product dimensions are 120” (H) x 132” (L) x 84”
(W).
Q: What materials is the product made of?
A: The product is made of steel.
Q: How should I tighten the bolts during installation?
A: Tighten all bolts securing flat plates and U-bolts using the
turn-of-nut method.
“`
4
3
1.0 GENERAL NOTES 1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR
PATENT INFO: https://www.cs-pat.com
2.0 DESIGN NOTES 2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND
SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE.
ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY
CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES
SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
D 2.2 FITS MONOPOLES 20″ TO 50″ OD. MONOPOLE DIAMETER MUST BE GREATER THAN OR
EQUAL
TO 20″ TO MEET ANTENNA TO ANTENNA CORNER SPACING OF >24″. 3.0
MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE
AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST 5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005. 5.2
PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER.
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
C
2
1
REVISIONS
REV.
DESCRIPTION
DATE APPROVED
A
INITIAL RELEASE
JL1183
CB1094
07MAY24 40194988CMO
B
V-ARM SFG2292-00 (ITEM 3) WAS SFG2278; SHEET5: ADDED V-ARM DETAIL VIEW
JL1183
CB1094
12JUL24 40200155CMO
D
C
B
B
SHOULD BE INSTALLED WITH UNIVERSAL INTERFACE PLATES FACING OUTWARDS
COMMSCOPE, INC. OF NORTH CAROLINA
TOLERANCES
0 PLACE X[.X] ± 0.25[6.3] 2 PLACE .XX[.X] ± 0.06[1.5] 1 PLACE .X[.X] ±
0.12[3.0] ANGLES ± 2°
SAP MATERIAL MASTER
MCG22RHDX-11M9120
FINISH
MATERIAL
A 4
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES INTERPRET PER ANSI Y 14.5M-1994
NAME
DATE TITLE
DENSITY
lbs/in³
CE JL1183 RW JL1183
07MAY24 07/15/2024
PG,MP,SF,11’FP,(09)120″AP
A
MASS 2148.18 lbs
VOLUME 8514.64
in³
SURFACE AREA 80527.73
in²
AD CB1094
07/18/2024
1:20 MCG22RHDX-11M9120 RE YMENG
08/05/2024
ECN 40200155CMO
SCALE DOCUMENT NO.
C 2024 CommScope, Inc. Confidential
HEIGHT 120” LENGTH 132″
WIDTH 84″
SIZE Auth Group INSL
MODEL
DRAWING
SHEET
C
VERSION
01
STATUS
RE
REVISION VERSION STATUS
B
01
RE
REVISION
B
1 OF 5
3
2
1
4
7
D
3
2
1
2
7
8
INSTALL FLAT WASHER ON NEAR SIDE AND LOCK WASHER ON FAR
SIDE
D
12 TIE BACK PIPE POSITION IS ONLY SHOWN AS REFERENCE
12
6
4
10
B
15 1
11
C
14
5 9
DETAIL B
SCALE 1 : 4
13
C
TOP
B
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES; INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM PART NO.
DESCRIPTION
QTY. WEIGHT NOTE NO.
1 MC-RM1550-3 15″ – 50″ OD RINGMOUNT
2 229.90 LBS
2 SFG2204
WELDMENT, BACK VERTICAL ARM MOUNT
3
36.96 LBS
3 SFG2292-00 WELDMENT, V-ARM, SECTOR FRAME 22
6
49.69 LBS
B
4 XP-R
CROSSOVER PLATE, ROUND, UP TO 3.5″ OD
6
6.20 LBS
5 XP-2525
CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD
18
8.37 LBS
6 XAU01
ANGLE, CROSSOVER, 1.9-3.5″ X 1.9-3.5″ OD
6
2.98 LBS
7 GB-05225
5/8″ X 2-1/4″ GALV BOLT KIT
30
0.28 LBS
8 GWF-05
A 9 GUB-53560
5/8″ GALV FLAT WASHER, 1.7OD 5/8″ X 3-5/8″ X 6″ GALV U-BOLT
6
0.06 LBS
12
1.30 LBS
10 GUB-4352
1/2″ X 3″ X 5-1/4″ GALV U-BOLT
18
0.71 LBS
11 GB-04145
1/2″ X 1-1/2″ GALV BOLT KIT
6
0.13 LBS
12 MT546084120 2.88″ OD X 84″ LONG PIPE
6
24.81 LBS
13 MT546120120 PIPE, 2.875″OD X 120″
9
35.44 LBS
14 MT546132
2.875″ O.D. X 132″ PIPE
6
62.64 LBS
15 SFG2295
LABEL, SFG22RHDX
3
0.04 LBS
4
3
10 3
SHOULD BE INSTALLED WITH UNIVERSAL INTERFACE PLATES FACING OUTWARDS
B
BOTTOM
ALLOWABLE TIEBACK ANGLE
15 DEGREES VERTICAL 25 DEGREES HORIZONTAL
15 DEGREES
COMMSCOPE, INC. OF NORTH CAROLINA
25 DEGREES
25 DEGREES
TITLE
PG,MP,SF,11’FP,(09)120″AP
A
15 DEGREES
2
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:20
DOCUMENT NO.
MCG22RHDX-11M9120
VERSION
01
DRAWING STATUS
RE
REVISION
B
SHEET
2 OF 5
1
4
3
2
1
FITS
50 20
1270 508
MONOPOLES
ALLOWABLE TIEBACK ANGLE
15 DEGREES VERTICAL 25 DEGREES HORIZONTAL
15 DEGREES
D
D
84 2131.6
FIELD TRIM AS NEEDED
25 DEGREES
25 DEGREES
C
15 DEGREES
1
D 90.0°
42 1074.4
11 7
C
63 1603.9
6 8
12
C
10
132 3352.8
DETAIL D SCALE 1 : 4
DETAIL C SCALE 1 : 4
B
A 4
TOP
120 3048.0
33 838.2
B
32 822.3
BOTTOM
SOME ITEMS OMITTED FOR CLARITY
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
PG,MP,SF,11’FP,(09)120″AP
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:20
DOCUMENT NO.
MCG22RHDX-11M9120
VERSION
01
DRAWING STATUS
RE
REVISION
B
SHEET
3 OF 5
3
2
1
4
ANTENNA SPACING SHOWN
D
C
B
3
2
20 508.0 2.2
6 152.4
36 914.4
60 1524.0
60 1524.0
25 631.1 2.2
ANTANNA SHOWN FOR REFERENCE (NOT INCLUDED IN THIS KIT)
1 D
C B
120 3048.0
A 4
60 1524.0
3
60 1524.0
SOME ITEMS OMITTED FOR CLARITY
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
PG,MP,SF,11’FP,(09)120″AP
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:24
DOCUMENT NO.
MCG22RHDX-11M9120
VERSION
01
DRAWING STATUS
RE
REVISION
B
SHEET
4 OF 5
2
1
4
3
D
SLOTS ALLOW FOR MOUNTING OF
3
RRU OR OTHER EQUIPMENT
28 719.9
C
E
2
2 1 B
1 D
C
B
A 4
.88 22.2
SIDE VIEW
B
3.76 95.6
2X .56 14.3 X 2.00 50.8
DETAIL E SCALE 1 : 3 2 PLACES
3
8X .44 11.1 X .69 17.5 8X .44 11.1
SOME ITEMS OMITTED FOR CLARITY
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
PG,MP,SF,11’FP,(09)120″AP
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:8
DOCUMENT NO.
MCG22RHDX-11M9120
VERSION
01
DRAWING STATUS
RE
REVISION
B
SHEET
5 OF 5
2
1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>