BIXOLON KN09-00041A Mobile Receipt Printer Instruction Manual

BIXOLON KN09-00041A Mobile Receipt Printer

Product Information

• Model: SPP-R200III
• Manufacturer: BIXOLON

Specifications

• Model Number: SPP-R200III
• Version: 1.04
• Printer Type: Mobile Receipt Printer
• Installation Guide : KN09-00041A

Product Usage Instructions

Battery Safety Precautions

1. If you observe any abnormal symptom, such as strange smell and overheating, contact your local dealer immediately.
2. Charge the battery only with the exclusive charger specified by BIXOLON to avoid overheating, combustion, or explosion.
3. Avoid exposing the battery to high temperatures, direct sunlight, water, or moisture to prevent overheating, combustion, or reduced performance.
4. Avoid throwing or subjecting the battery to strong shock to prevent potential risks of overheating, combustion, or explosion.
5. Do not use a damaged or deformed battery as it may lead to adverse chemical reactions.

Content Confirmation

Paper Installation:

1. Press the open button to open the paper cover.
2. Insert the paper as shown in the image. Remove any remaining core of a fully used paper roll.
3. Align the paper correctly and close the paper cover.
4. Tear off any excess paper in the direction of the side of the printer.

Battery Charging:

1. Turn off the printer power.
2. Connect the power cord to the battery charger and then connect to AC power.
3. Open the external interface cap in the direction of the arrow.
4. Connect the battery charger to the power connector.
   Note: Use only the specified battery charger to avoid serious damage to the printer.

Belt Strap Installation
Insert the belt strap screw into the belt strap hole.

Frequently Asked Questions (FAQ)

Can I use a different charger to charge the printer battery?
It is recommended to use only the exclusive charger provided by BIXOLON to prevent any damage to the printer due to incorrect voltage or electrical current specifications mismatch.

Information

• This installation guide contains quick information required for the product installation. Refer to the User’s Manual in the CD that comes with the product for detailed installation instructions. The CD contains the following information.

  1. Manual: User’s, Windows CE Module Program, Code pages, Commands, Bluetooth & Wireless
  2. Driver: Windows driver
  3. Utility: VMSM (Virtual Memory Switch Manager),
     NV Image Download Manager, Firmware Download Manager

• We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual content may be changed without prior notice.

• Please refer to the BIXOLON website for the addresses and phone numbers of the company’s headquarters and branch offices. (www.bixolon.com)

Battery Safety Precautions

1. If you observe any abnormal symptom, such as strange smell and overheating, on first use after purchasing the product, contact your local dealer immediately.

2. Charge the battery only with the exclusive charger specified (optionally provided) by BIXOLON. The use of an incorrect charger may result in overheating, combustion and/or explosion of the battery.

3. Do not use or leave the battery in a location exposed to high temperatures or intense direct sunlight, such as within an automobile. Doing so can cause battery overheating and/or combustion. In addition, battery performance and product life may be reduced.

4. Do not allow water, seawater or moisture to enter or leak into the battery. If the safety mechanism within the battery becomes oxidized, the battery may overcharge with abnormal electrical current and/or voltage so that it may overheat, ignite and/or explode.

5. Do not throw the battery or subject it to strong shock. If the safety mechanism in the battery is damaged, the battery may be overcharged and, consequently, an adverse chemical reaction may be generated in the battery.
   There is a potential risk of battery overheating, combustion, and/or explosion.

6. Do not use the battery if it is damaged or the exterior is deformed due to external shock or if it is swollen.

Content Confirmation

Product Part Names

Installation and Charging

Battery Installation

1. Insert the battery on the rear side of the printer, aligning the battery hook properly.
2. Push the battery into the slot until a snapping sound is heard.

Note
As the battery is not charged at the time of purchase, charge the battery prior to product use. (Use the battery charger)

Paper Installation

1. Press the open button to open the paper cover.
2. Insert the paper as shown in the image. (Remove any remaining core of a fully used paper roll.)
3. Take care to align the paper correctly.
4. Pull the paper out and close the paper cover.
5. Tear off any excess paper in the direction of the side of the printer.

Battery Charging

1. Turn off the printer power.
2. Connect the power cord to the battery charger, and the connect AC power.
3. Open the external interface cap in the direction of arrow.
4. Connect the battery charger to the power connector.

Note
The printer may incur serious damage If the battery charger provided by BIXOLON is not used. BIXOLON is not legally liable for any such damage. (The voltage and electrical current specifications of the printer and battery charger must match.)

Belt Strap Installation

1. Insert the belt strap screw into the belt strap hole.
2. Use a coin to tighten the belt strap screw as shown in the image.

Belt Clip Installation

1. Insert the screw of the belt clip to the belt clip mounting hole.
2. Fasten the screw of the belt clip with an object like a coin as shown in the picture. (be careful to fasten in the correct direction.)

Control Panel Usage

• POWER BUTTON
  This button is used to turn the printer on and off.

• FEED BUTTON
  This button is used to feed paper manually, take the self-test and dump hexadecimals.

• ERROR LED

  • If the red led is lit, the paper cover is open.
  • If the red led is blinking, either the paper has been fully used or the print head is overheated.
  • If the red led continues to blink, it may indicate a more serious problem with the product, and thus an authorized service dealer should be consulted.

• BATTERY LED

  • If three blue led are lit, the battery is fully charged.
  • If two blue led are lit, the battery is half charged.
  • If one blue led is lit, the battery is at the lowest charge level.
  • If the red led is lit, the battery must be charged or replaced.

• STATUS LED (Bluetooth or Wireless LAN)

1.  **When using Bluetooth**  

If the printer is ready for wireless communication with any Bluetooth, the green led as well as the battery status led is turned on.

2.  **When using wireless LAN**
  * The right indicator shows the signal strength from wireless LAN.
  * The green led is solid for acceptable signal strength while the green led blinks for weak signal strength.  

Note
In power save mode, only the Status led is lit.

Self-test

Run the self-test when first setting the printer or when encountering a problem, and check the following.

• Control Circuit, Mechanisms, Print Quality, ROM Version, and Memory Switch Settings
  If no issue is found with the printer after running the self-test, examine the other devices or peripherals and software. This function is independent of such other devices and software.

• Self-Test Instructions

  1. Turn the printer power off and close the printer paper cover.
  2. Pressing the paper feed button and power button simultaneously turns the printer on.
  3. After printing begins, please release the two buttons.
  4. To add a printout of the ASCII pattern, press the paper feed button once more.
  5. After the ASCII pattern is printed out, the self-test is automatically terminated.

Product Specifications

Printing

| Printing Method| Thermal printing
Printing Speed| 100 mm/sec (Receipt Paper) 80 mm/sec (Linerless Paper)
Resolution| 203 DPI
Paper Supply Mode| Easy paper loading

Character Size

| Font A: 12 × 24

Font B: 9 × 17

Font C: 9 × 24

Characters Per Line| Font A: 32       Font B/C: 42

Character Set

| English: 95

Expanded Graphics: 128 × 33 pages

International: 32

Barcode

| 1 Dimension: UPC A, UPC E, CODE 39, CODE 93, Code 128, EAN 8, EAN 13, ITF, Codabar

2      Dimension: PDF417, DATAMATRIX, MAXI,

QR Code, GS1 DataBar, Aztec

Emulation| BXL/POS

Driver

| Windows XP(32/64bit) / WEPOS /

2003 Server(32/64bit) / VISTA(32/64bit) /

2008 Server(32/64bit) / 7(32/64bit) / 8(32/64bit)

SDK| Windows XP / WEPOS / 2003 Server /

VISTA / 2008 Server / 7 / 8 / CE 3.0 and later

Sensor| Paper End, Paper Cover Open
Cutter Type| Tear-Bar
Language| User language supported

Paper

| Paper Form| Receipt| Linerless
Paper Type| Thermal paper| Thermal paper
Diameter| Max. ø40 mm (1.57”)| Max. ø39 mm (1.54”)
Width| 57.5 ± 0.5 mm

(2.26” ± 0.2”)

| 57.5 ± 0.5 mm

(2.26” ± 0.2”)

Thickness| 0.07 ± 0.003 mm| 0.08 ± 0.008mm

Note

1. This equipment is indooruse and all the communication hiring are limited to inside of the building.
2. The switch is the disconnecting device. Turn off switch from any hazard.

Label Printing Function

1. Label Function Setting
   Label paper and black mark paper available at the label mode.

   • Setting Operations
   1. Turn on the printer power.
   2. Open the paper cover and press and hold down the paper feed button for longer than two seconds.
   3. After the buzzer tone is emitted, insert paper and close the cover.
   4. Repeat the steps above to return to receipt mode.
   • Setting Via Memory Switch
     Please refer to the memory switch changing section of the Commands Manual.

2. Auto Calibration Function
   The label printing function requires the recognition of label paper gaps and black mark paper black bar in order to print.
   If label paper gaps are not properly recognized, use the auto calibration function.

   • Auto Calibration Instructions
   1. Turn the printer power off while in label print mode.
   2. Press and hold down the paper feed button and then press the power button.
   3. After the following printout is outputted, press the power button to perform auto calibration.
   • Select the mode
   • Auto Calibration: Power Button
   • Self Test: Feed Button
   4. Three pages of label paper are outputted when performing auto calibration.

Peripherals Connection

1. Bluetooth & Wireless LAN Connection

2. The printer can be connected to devices equipped with Bluetooth communication capacity (PDAs, PCs, etc.).

3. Use the Bluetooth connection function supported by the device to connect to the printer. The NFC tag built into the printer enables automatic pairing with devices.
   Note
   The device must support NFC Auto Pairing. It may display a message that the device cannot be connecteREVd as NFC Auto Pairing is supported upto the B/T pairing and the devices must connected manually, but this is normal.

4. The printer can be connected to other stations, such as PDAs and PCs supporting wireless LAN communication in Ad-hoc mode and AP in Infrastructure mode.
   Note
   Refer to the Bluetooth Wireless LAN Manual for detailed information on its connection. You can check the Bluetooth environment (authentication, encryption, connection mode) and the wireless LAN environment (IP, SSID, authentication, encryption) via the self-test page.

5. Interface Cable Connection

6. Open the Interface Cap

7. Connect the interface cable (optional) to the cable connector of the printer.

Printer Cleaning

If the interior of the printer is dusty, print quality can decline.
In such a case, follow the instructions below to clean the printer.

Caution

1. Make sure the printer power is turned off before cleaning.

2. Wait for two to three minutes after power-off before head cleaning because the head part may become very hot during printer operation.

3. Take care not to touch the heating region of the head with your hand while cleaning the head part.
   → The printer head may be damaged by static electricity.

4. Take care to avoid scratching the head.

5. Clean the printer head periodically if linerless paper is used. Recommended cleaning period is after consuming ten rolls of linerless paper (100 meters), or more than once a week. Printing quality may be degraded or printer life may be shortened if the head is not cleaned periodically.
   Warning
   Use only the linerless paper that is provided by BIXOLON. Use of other paper voids product warranty.

Certification

• This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or people from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
• Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
• The following Bluetooth mark and ID D022644 is only applicable to models with the Bluetooth SIG qualification.

References

• BIXOLON | pos printer, mobile printer, label printer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>