Impala PRJ31758 Panel Surface Mounted Frame Instruction Manual

September 19, 2024
Impala

Impala PRJ31758 Panel Surface Mounted Frame

Specifications

  • Product Name: Panel surface mounted frame
  • EAN: 5059340963761
  • Reference: PRJ31758
  • Page Size: A4

Product Information

The panel surface mounted frame is designed for indoor use and comes with the following parts:

  • 01. x2
  • 03. x4
  • 04. x4

Not included parts

  • 02. x2
  • 05. x4

You will need x1 of the required item.

Usage Instructions

Care & Maintenance
Ensure the product is turned off before performing any maintenance. Wipe the panel surface with a soft, damp cloth to clean. Do not use harsh chemicals or abrasive materials.

Safety Instructions
Do not stare at the operating light source. This product is for indoor use only.

FAQ
Q: What should I do if the product is defective?
A: If the product is defective, you can contact the store from  which you purchased it for a replacement or refund within a reasonable time.

Panel surface mounted frame
IMPORTANT – These instructions are for your safety. Please read through them thoroughly prior to handling the product and retain them for future reference.

Parts

You will need

Care & maintenance

Safety

  • These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference.
  • All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
  • Check the pack and make sure you have all of the parts listed.
  • Remove all packaging, wrap etc from the product.
  • Decide on the appropriate location for your product.
  • This product is suitable for indoor use only and not for areas constantly subject to moisture such as bathroom.
  • Always refer to the installation drawing for the orientation of the product.
  • IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.
  • When the product does not light after installation:
    • Ensure there is no electricity failure
    • Ensure all the connections are secured
  • If you have any doubt about installation/use of this product, consult a qualified electrician.
  • Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
  • It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.

Technical Data

Guarantee

We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product has a manufacturer’s guarantee  of 2 years against manufacturing defects, from the date of purchase  if bought in store) or date of delivery (if bought online), at no additional cost for normal use.
To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase
in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original period guarantee period.

  • This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.

  • This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour etc), or direct and indirect damage.

  • If the product is defective, we will replace or refund, within a reasonable time.
    Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from.

  • The guarantee is in addition to and does not affect your statutory rights.

 Installation

Manufacturer:
UK Manufacturer:
Kingfisher International Products Limited, 1 Paddington Square, London, W2 1GG, United Kingdom

EU Manufacturer:
Kingfisher International Products B.V., Rapenburgerstraat 175E,
1011 VM Amsterdam,

The Netherlands
EN www.diy.com
www.screwfix.com
www.screwfix.ie
To view instruction manuals online, visit www.kingfisher.com/products Made in China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals