Impala PRJ29749 Multihead Shower with Diverter Thermostatic Instruction Manual

June 16, 2024
Impala

Impala PRJ29749 Multihead Shower with Diverter Thermostatic

Impala-PRJ29749-Multihead-Shower-with-Diverter-Thermostatic-
PRO

Product Information

  • EAN: 5059340622095
  • Impala Ref: PRJ29749
  • KNG: KNG-3307-1
  • Page Size: A5

Safety
These instructions are for your safety. Please read through them thoroughly before handling the product and retain them for future reference.

Guarantee

  • This product has a manufacturer’s guarantee of 5 years against manufacturing defects, from the date of purchase (if bought in-store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.
  • This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance by the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.
  • This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labor, etc.), or direct and indirect damage.
  • If the product is defective, we will, within a reasonable time, replace it.
  • Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee-related queries should be addressed to the store you purchased this product from.
  • The guarantee is in addition to and does not affect your statutory rights.

Assembly

  1. Pull out and spring neck taps.
  2. Connect the tap connections as tightly as possible.
    CAUTION: DO NOT OVERTIGHTEN FIXINGS AS THIS MAY DAMAGE THE PRODUCT.

Care & Maintenance

  • Clean and maintain the product regularly according to the information provided in the user manual.
  • Follow standard practice for cleaning and maintenance.

FAQ

  • Q: What is the warranty period for this product?
    A: This product has a manufacturer’s guarantee of 5 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non- professional or commercial) household use.

  • Q: What does the guarantee cover?
    A: The guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance by the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.

  • Q: What is not covered by the guarantee?
    A: The guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labor, etc.) or direct and indirect damage are also not covered unless stated otherwise by applicable law.

IMPORTANT – These instructions are for your safety. Please read through them thoroughly before handling the product and retain them for future reference.

Parts

Impala-PRJ29749-Multihead-Shower-with-Diverter-Thermostatic-
\(1\)

You will needImpala-PRJ29749-Multihead-Shower-with-Diverter-Thermostatic-
\(2\)

Safety

  • Where possible drill between tiles in the grout.
  • Failure to follow these instructions may result in personal injury, damage to the product and property damage.
  • Prevention of frost damage. When the domestic water system is drained, thermostat mixers must be drained separately, since non-return valves are installed in the hot and cold water connections. For this purpose, the mixer must be removed from the wall.
  • Never twist or kink the hose or otherwise restrict the water flow whilst in use.

Getting started

  • Make sure you have all of the parts listed.

  • Make sure you have all of the tools required.

  • This tap must be installed by a suitably competent person.

  • For domestic use only.

  • Check that the tap is suitable for your water system.

  • The minimum supply pressure for this tap is shown on the packaging.

  • Supply pipes must be flushed before connecting the tap to ensure no pipe or plumbing debris enters the tap.

  • If a combination boiler is installed turn off the boiler before starting work.

  • Isolate the hot and cold water supply as close to the tap connections as possible.
    CAUTION: DO NOT OVERTIGHTEN FIXINGS AS THIS MAY DAMAGE THE PRODUCT.

  • Take special care when installing flexible supply hoses. Tighten by hand only and do not overtighten. Never twist or fold the flexible pipe during fitting as this may damage or weaken the pipe causing leaks.

  • Ensure that the product is properly installed before using.

  • When the installation is complete, turn the water supply on and check for leaks at all connection points.

  • TURN OFF WATER MAINS SUPPLY. The mains stopcock is usually situated where the supply enters the building.

  • It is also recommended that the water heating arrangements are turned off.
    Isolate the hot and cold water supply.

  • Operating Specification:

    • Hot Water Supply – Maximum. 85°C
    • Recommended 55-65°C
  • Operating Pressure: Maximum 5 Bar

  • Always maintain a 50˚C difference between the hot system temperature and the maximum hot temperature setting of the valve.

  • If you are in any doubt about installing this product, consult a technically competent installer.

  • Operating pressures on hot and cold lines should be kept as even as possible to ensure the maximum efficiency of the mixer.

  • When water pressure is higher than 5 bar a pressure-reducing valve (not supplied) must be fitted before the mixer.

  • Each shower valve is supplied with integral nonreturn valves in the hot and cold inlet tailpieces to prevent cross-flow and cross-contamination of the water supplies.

  • This product must be connected to a water supply by the Water Supply (Water Fittings) Regulations 1999 and UK Building Regulations. If you are in any doubt about these requirements, contact a qualified plumber, your local Water Company or the Water Regulations Advisory Service (WRAS).

Pull out and spring neck taps

  • Warning from your Water Supplier.
  • If the distributing pipes feeding this tap from the storage cistern have other outlets connected to them, the outlet of this tap must be lower than any of those other outlets.
  • If installed as a tap that is used for drawing water for drinking, and the quality of water from the storage cistern does not meet the standards for drinking water, a separate tap supplied with wholesome water must be provided for drinking purposes.

Guarantee

We take special care to select high-quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product has a manufacturer’s guarantee of 5 years against manufacturing defects, from the date of purchase (if bought in-store) or date of delivery (if bought online), at no additional cost for normal (non- professional or commercial) household use.

To claim this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second- hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original period guarantee period.
This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance by the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.

This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labor etc), or direct and indirect damage. If the product is defective, we will, within a reasonable time, replace it. Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee-related queries should be addressed to the store you purchased this product from. The guarantee is in addition to and does not affect your statutory rights.

IMPORTANT – RETAIN THIS INFORMATION FOR FUTURE REFERENCE: READ CAREFULLY.

Assembly

Impala-PRJ29749-Multihead-Shower-with-Diverter-Thermostatic-
\(3\) Impala-PRJ29749
-Multihead-Shower-with-Diverter-Thermostatic- \(4\) Impala-PRJ29749-Multihead-Shower-with-Diverter-
Thermostatic- \(5\) Impala-PRJ29749
-Multihead-Shower-with-Diverter-Thermostatic- \(6\) Impala-PRJ29749-Multihead-Shower-with-Diverter-
Thermostatic- \(7\) Impala-PRJ29749
-Multihead-Shower-with-Diverter-Thermostatic- \(8\) Impala-PRJ29749-Multihead-Shower-with-Diverter-
Thermostatic- \(9\) Impala-PRJ29749
-Multihead-Shower-with-Diverter-Thermostatic- \(10\) Impala-PRJ29749-Multihead-Shower-with-Diverter-
Thermostatic- \(11\) Impala-PRJ29749
-Multihead-Shower-with-Diverter-Thermostatic- \(13\)

Care and Maintenance

  • Use warm soapy water and a soft damp cloth to clean the surface of the product. Wipe dry with a clean cloth.
  • Never use any solvents, scourers, abrasives, bleach, acids, strong detergents, aggressive chemical cleaners or solvent-type cleaning solutions on the product.
  • Periodically check fixings and connections to ensure there are no leaks.
  • Flexible supply hoses are fitted with mesh filters to prevent debris from your water supply from damaging the tap. Over time these may become blocked, reducing the flow from the tap. If this occurs, turn off the water supply to the tap, disconnect the flexible hoses and clean the filters.

Manufacturer
UK Manufacturer:
Kingfisher International Products Limited, 1 Paddington Square, London, W2 1GG, United Kingdom

www.diy.com
www.screwfix.com
www.screwfix.ie
To view instruction manuals online, visit www.kingfisher.com/products

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals