Motion healthcare Elev8 Portable Mobility Hoist User Manual

Motion healthcare Elev8 Portable Mobility Hoist

Product Information

Specifications

• Maximum Lifting Capacity: 50 kg
• Size (Folded): 750mm x 480mm x 230mm
• Size (Unfolded): 750mm x 730mm x 910mm
• Total Weight (Without Battery): 10 kg
• Total Weight (With Battery): 11 kg
• Maximum Slope: N/A
• Battery Size: Lithium battery
• Motor Size: Lift motor

Product Usage Instructions

Mounting Operation

1. Align the yellow line on the tabletop with the tire of the wheelchair.
2. Engage the brakes on all four castors to prevent the wheels from turning.
3. Untie the safety belt.
4. Invert the wheelchair onto the tabletop so that the wheels are  in contact with the edge.
5. Buckle the safety belt.
6. Press the Up button on the controller until the tabletop is at the desired height.
7. Release the brakes on all castors.
8. Adjust the platform height to allow the wheelchair’s anti-overturn wheel to enter the trunk.
9. Engage the brakes again on all castors.
10. Secure the controller in the battery pack.
11. Untie the safety belt.
12. Lift the wheelchair as shown in the picture and push it into the trunk.
13. Ensure stability and release all castor brakes.
14. Press the Down button on the controller to close the platform.
15. Secure the controller and power plug in the battery pack and buckle the safety belt.

Dismounting Operation

1. Remove the controller and power plug from the battery pack.
2. Press the Up button on the controller until the tabletop reaches the bottom surface of the trunk.
3. Adjust the platform height so that it is slightly higher than the trunk height.
4.  Align the yellow lines on the platform with the wheelchair’stires.
5. Engage the brakes on all four castors.
6. Lift and move the wheelchair from the trunk to the platform car. Ensure stability by positioning the wheelchair’s tires on the edge of the tabletop as shown in the picture.

Frequently Asked Questions (FAQ)
Q: What is the maximum lifting capacity of the product?
A: The maximum lifting capacity is 50 kg.

Introduction

Thank you for choosing to purchase the Elev8 portable mobility hoist.
Your safety is our utmost priority. Please read and follow all instructions in this owner’s manual carefully before operating your Elev8 portable mobility for the first time. For your own safety, it is crucial that you completely understand the instructions given in this owner’s manual.
Motion Healthcare is not liable for any property damage or bodily injury which may occur as a result of improper use of this power wheelchair or failing to follow the instructions in this owner’s manual.
If you have problem in comprehending the warnings and instructions contained in this manual, please contact your distributor, or your provider or the manufacturer. We, at Motion Healthcare, strive to enrich your life!

Scope of Use and Notes

The Elev8 is an electric lifting platform with locking castor wheels. The platform can be moved up and down between 25cm to 90cm, lifting a maximum weight of 50kg. The Elev8 should be used on a flat surface with the a slope less than 3°.

Notes

1. Lock the platform with the castor brake before the lifting operation.

2. Place the article on the center of the platform, and fix the article before the lifting operation of the platform

3. When the platform is being lifted up, the anti-tipping rod in the bottom will extend out, so the user should be careful when walking around the platform.

Product Structure

Technical Specifications

SPECIFICATION|
---|---
MAXIMUM LIFTING CAPACITY| 50 kg
SIZE IFOLDED)| 750mm x 480mm x 230mm
SIZE (UNFOLDED)| 750mm x 730mm x 910mm
TOTAL WEIGHT (WITHOUT BATTERY)| 10 kg
TOTAL WEIGHT (WITH BATTERY)| 11 kg
MAXIMUM SLOPE| 3°
BATTERY SIZE| 5ah
MOTOR SIZE| 29v 75w

Use Instruction

The following example is demonstrated using a Foldalite Powerchair.

1.  Mounting Operation

2. A1. Align yellow line on the tabletop with the tyre, without too much deviation.

3. A2. Step on the brakes on four castors, and ensure that the wheel cannot turn

4. A3.Untie the safety belt

5. A4. The wheelchair is placed on the tabletope in an inverted direction as shown in the picture with the wheels in contact with the edge of the tabletop.

6. A5. Buckle the belt

7. A6. Keep pressing the Up button on the controller, till the tabletop reaches the bottom surface of the trunk of the vehicle.

8. A7. Release the brakes on all castors.

9. A8. Move the platform to the side of the trunk, adjust the platform height, as shown in the picture, to the height that the anti-overturn small wheel of the wheelchair can go into the trunk…

10. A9. Step on the brakes on four castors, and ensure that the wheel cannot turn

11. A10. Place the controller into the battery pack to prevent any damage.

12. A11. Untie the safety belt

13. A12. Manually grasp the position in the picture to lift the wheelchair.

14. A13. Push it into the trunk, and guarantee that the wheelchair is stably placed. Release the brakes on all castors

15. A14. Keep pressing the Down button on the controller, so that the platform is totally closed.

16. A15. Collect the controller and power plug into the battery pack, and buckle the safety belt. Place the platform car into the trunk of the vehicle or other proper position.

17. Dismounting Operation

    • B1. Take out the controller and power plug from the battery pack.

    • B4. Keep pressing the Up button on the controller, till the tabletop reaches the bottom surface of the trunk of the vehicle.

    • B5. Adjust the position of the platform car, so that the tabletop is 50mm higher than the trunk height. Align the two yellow lines on the platform with the tyres.

    • B6. Step on the brakes on four castors, and ensure that the wheel cannot turn

    • B7. Manually grasp the position in the picture to lift the wheelchair. Move the wheelchair from the trunk to the platform car

    • B8. The tyres are in contact with the edge of the tabletop as shown in the picture, to ensure that the wheelchair is stably placed.

    • B9. Buckle the safety belt

    • B10. Release the brakes on all castors.

    • B11. Move the platform car from the vehicle, and ensure that the platform car will not collide with the vehicle during the lowering operation. Keep pressing the Down button on the controller, so that the platform is totally closed.

    • B12. Untie the safety belt

    • B13. When one end is lifted up, the wheelchair will be moved away from the platform after the landing of the motor wheel of the wheelchair.

    • B14. Buckle the safety belt

    • B15. Collect the controller and power plug into the battery pack, and buckle the safety belt. Place the platform car into the trunk of the vehicle or other proper position.

Notes: Please ensure all goods placed on the platform are securely strapped in place before starting to move them.

1. When lifting the platform, it is required to ensure that the castors have brakes applied, and avoid the movement of the platform during the lifting and lowering operation, and it is better to hold the wheelchair with one hand.
2. When the power plug is connected with the wheelchair power supply, it is required to fix the fastening tape onto the wheelchair and insert the power plug. Otherwise there will be the risk that the power plug pops out.
3. After the operation, the controller is placed into the battery pack, to avoid being broken or trampled.

• If you have opted to purchase the dedicated Elev8 Battery and charger then please follow these instructions.

External battery connection operation

The lifting platform can also be powered by the battery of PL001 wheelchair. There is one changeover plug in the accessory, and proper plug can be chosen and inserted and then placed into the battery pack.

Battery Installation Instructions of Boarding Device

1. As shown in the figure. Before installing the battery, connect the power plug on the boarding device to the battery, and press the UP button on the manual controller to raise the boarding device by about 50cm.
2. Insert the two screws on the battery into the corresponding holes on the frame and tighten the knob. Make sure that the battery is installed in the same direction as Figure B.
3. In order to prevent the power plug from falling off during use, please fasten the buckle and ensure that the power plug is tightly inserted. Turn on the power switchbattery is installed in the same direction as Figure B.
4. When the boarding device is not used for a long time, please p turn off the power switch..

Battery Installation Instructions of Boarding Device

As shown in Figure B, connect one end of the charger to the battery and the other end to the charging plug. The red light on the charger indicates that it is charging and the green light indicates that it is fully charged.

If the battery is mounted on the boarding device, you only need to pull out the power plug and insert the charger plug to charge the battery.

Notes

1. Fully charge the battery first when it is not used for a long time. Charge the battery at least once a month, and each time when you charge it, please wait the light turns green.
2. The battery must be charged with a matching charger to avoid battery damage.
3.  The charging environment must be dry, ventilated, and free of inflammable and explosive materials to prevent fire.
4. This battery cannot be used in other equipment to avoid battery damage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>