CARBEST 318028 Roof Ventilation System Van Vent Instruction Manual
- September 18, 2024
- CARBEST
Table of Contents
CARBEST 318028 Roof Ventilation System Van Vent
Product Information
Specifications
- Brand: CARBEST
- Model: VanVent 400×400
- Overall Dimensions: 400mm x 400mm
- Range of Applicable Wall Thickness: 27-80mm
Product Usage Instructions
Installation
Before starting the installation process, carefully read the user manual
provided with the product. Follow the steps below:
- Choose a suitable location on the vehicle body for installation.
- Determine the appropriate drive square shaft size based on the wall thickness.
- Mount the VanVent securely using the wall brackets provided.
Operation
To operate the VanVent, follow these steps:
- Use the remote control to adjust the ventilation settings.
- Ensure the safety features are functioning properly before operation.
Maintenance
Regularly clean the ventilation system to ensure optimal performance. Check
for any obstructions or damages that may affect its functionality.
FAQ
Q: What should I do if the VanVent is not operating normally?
A: If the VanVent is not operating as expected, first check for any
obstructions or issues with the power supply. Refer to the user manual for
troubleshooting steps.
Q: How do I adjust the ventilation settings?
A: You can adjust the ventilation settings using the remote control
provided with the VanVent. Follow the instructions in the user manual for
detailed guidance.
MAIN COMPONENTS
- Outdoor unit
- Mounting frame
- Indoor unit
- Lampshade
- Control panel
- Hand knob
- Mosquito net
- Blackout plissee
- Remote control base
- Remote control
DESCRIPTIONS OF FUNCTIONS AND PARAMETERS
Safety Protection Function
Fan blade anti-pinch function| In case of any abnormal resistance when the fan
blade of VanVent is rotating, the fan blade will stop after being blocked, and
cannot work normally until its rotation is confirmed normal.
Top cover anti-pinch function| In case of any abnormal resistance during the
lifting and lowering of the top cover of VanVent, the top cover will stop
immediately and cannot work normally until the problem is removed.
Voltage protection| When the input voltage of the VanVent ventilating fan is
smaller than 9V or higher than 16V, the VanVent ventilating fan does not work
and is under voltage protection to prevent the vehicle battery from feedback
or the VanVent ventilating fan from being damaged.
Operating Parameters
Opening size| 400mm×400mm
Thickness of mounting wall| 27-80mm
Power| Full load power: 20W+4W (max. wind speed and full lighting)
Voltage| Normal voltage: 12V, working voltage: 9-16V (VanVent does not work
when the voltage is smaller than 9V or greater than 16V)
Current| Gear 4 by default: ≤0.25A, full-load maximum current ≤1.6A, locked-
rotor maximum current ≤2.0A
Working noise
| Air outlet noise of Gear 4 by default of VanVent ≤ 29dB, air inlet noise
≤32dB;
Air outlet noise of Gear 10 ≤47dB, air inlet noise ≤53dB;
Max. ventilation| 3,000 m³/hour
IP rating| IPX4
Temperature adjustment in AUTO mode| Default temperature of control panel:
26°C (non-adjustable); range of adjust- able temperature in remote control:
-2°C~40°C
Please note: Technical data may change due to further technical development.
PRECAUTIONS
Please read through this manual before mounting, and install the VanVent in strict accordance with the provisions contained in this manual. In addition, keep this manual properly for further reference. To avoid any personal injury or property loss of users and third parties, please observe the safety warnings and precautions contained herein strictly.
Marks and meanings
INSTALLATION OF VANVENT
NOTE: We recommend installation by qualified personnel. Ask your dealer to install the VanVent if you do not have sufficient installation knowledge.
HOW TO USE VANVENT
CONTROL PANEL
- Startup temperature of the control panel under automatic mode by default 26°C/79°F!
Remote control
Description of special functions: AUTO mode
Description of special functions: Pair remote control with VanVent
- The pairing must be completed within 20 s after the VanVent unit is powered on (if the pairing is not completed, power off and then power on again for pairing once again).
- Please turn off the power when leaving the vehicle for a long time!
WARRANTY CONDITIONS
Reimo Reisemobil-Center GmbH, Boschring 10, 63329 Egelsbach (hereinafter referred to as „Reimo“ or „we“) grants you a warranty of 3 years in addition to the statutory warranty rights for products sold under Reimo‘s brand „Carbest“. The period for calculating the warranty period begins on the invoice date. The territorial scope of our guarantee extends to the territory of the Federal Republic of Germany. Should material or manufacturing defects occur in the product you have purchased during the warranty period, we will provide you with one of the following services of our choice under this warranty:
- Free repair of the goods or
- Free exchange of the goods for an equivalent item
All original parts that have been replaced as part of the provision of warranty services become the property of Reimo. The new parts or replacement parts become the property of the customer. Repairs or replacements under warranty do not entitle the warranty period to be extended or restarted. In the event of a warranty claim, please contact the dealer from whom you purchased the item in question or contact Reimo directly as the guarantor: Reimo Reisemobil-Center GmbH, Boschring 10, 63329 Egelsbach, Phone: 06150 8662-310 The guarantee does not apply if defects other than material or manufacturing defects are found. Warranty claims are excluded in the event of damage to the goods caused by:
- Regular wear
- Improper and non-intended use of the product
- Improper operation, installation, assembly, commissioning, or operation contrary to the respective instructions for use and/or installation, in particular, if maintenance, care, and warning instructions are disregarded
- Non-observance of any safety precautions
- Use of force (e.g. beatings)
- Own repairs
- Use of non-original parts from the manufacturer or parts not approved by the manufacturer
- Environmental influences (heat, humidity, etc.)
- Circumstances for which the manufacturer is not responsible (e.g. natural disasters, accidents)
- Improper transportation
The prerequisite for claiming under the guarantee is that you enable us to check the guarantee case (e.g. by sending in the goods). Care must be taken to ensure that damage to the goods during transportation is avoided by using secure packaging. A copy of the invoice for the consignment of goods must be enclosed to claim under the guarantee. This is so that we can check that the guarantee conditions are met. Without a copy of the invoice, we may refuse to provide warranty service. In the event of a justified claim under warranty, you will not incur any shipping costs, i.e. we will reimburse you for any shipping costs for sending in the goods. Please note: This Reimo dealer guarantee does not restrict your statutory rights in the event of defects (warranty rights) against Reimo / a dealer and you can make a claim free of charge. Any existing warranty rights against Reimo remain unaffected by this guarantee promise. This manufacturer‘s guarantee therefore extends your legal position. If the purchased item is defective, you may in any case assert
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>